交叉编译php5,、nginx、squid方法

时间：2023-03-09 01:32:24
交叉编译php5,、nginx、squid方法

本文为原创，转载请注明：http://www.cnblogs.com/tolimit/

交叉编译php5

　　软件版本：php-5.4.27

　　依赖库：zlib,libxml2

　　交叉编译器：arm-hisiv200-linux-gnueabi

  1. 将交叉编译器路径添加到PATH中， 我的交叉编译器目录为/usr/local/arm-hisiv200-linux/，而交叉编译器在交叉编译器目录的/bin中，在控制台输入 
    PATH=$PATH:/usr/local/arm-hisiv200-linux/bin/
  2. 首先先交叉编译zlib，进入zlib源码目录。
  3. 执行CC=arm-hisiv200-linux-gnueabi-gcc  ./configure  --shared  --prefix=ZLIB_PATH(编译成功后的安装路径)
  4. make && make install
  5. 在ZLIB_PATH中会有编译成功后的文件和配置。
  6. 然后交叉编译libxml2，进入libxml2源码目录。
  7. 执行CC=arm-hisiv200-linux-gnueabi-gcc  ./configure  --host=arm-hisiv200-linux-gnueabi  --prefix=LIBXML2_PATH(编译成功后的安装路径)
  8. make && make install
  9. 在LIBXML2_PATH中会有编译成功后的文件和配置。
  10. 开始交叉编译php5，进入php5源码目录。
  11. 首先先执行./buildconf  --force，为了防止出现 cp:cannot stat 'sapi/cli/php.1': No such file or directory
  12. 执行./configure  --host=arm-hisiv200-linux-gnueabi  --enable-shared  --with-zlib-dir=ZLIB_PATH  --with-libxml-dir=LIBXML2_PATH  --disable-phar  --with-sqlite  --with-pdo-sqlite  --without-iconv  --enable-fpm  --prefix=PHP5_PATH
  13. make && make install
  14. 编译好的php程序及配置就在PHP5_PATH中。

交叉编译nginx

　　软件版本：nginx-1.6.2

　　依赖源码：pcre,zlib(这里是需要用到它们的源码)

　　交叉编译器：arm-hisiv200-linux-gnueabi

　　linux版本：32位ubuntu(这个很重要，主要是使用32位x86系统才能进行编译成功，因为字长不一样)

　　交叉编译nginx与交叉编译php5不同就是nginx用的是依赖的库的源码，而php5用的是库文件。

  1. 进入nginx-1.6.2源码目录。
  2. 在配置和编译nginx会出现很多错误，我们一个一个解决，首先我使用的configure配置如下： 
    #!/bin/bash

CC_PATH=/home/shanlink/Cross_compile/arm-hisiv200-linux/bin/arm-hisiv200-linux-gnueabi-gcc
    
CPP_PATH=/home/shanlink/Cross_compile/arm-hisiv200-linux/bin/arm-hisiv200-linux-gnueabi-g++
    
INSTALL_PATH=/home/shanlink/Cross_compile/nginx_ccs/
    
PCRE_PATH=/home/shanlink/Cross_compile/pcre-8.11/
    
ZLIB_PATH=/home/shanlink/Cross_compile/zlib-1.2./
    
CC_OPTS="-I /home/shanlink/Cross_compile/arm-hisiv200-linux/target/include/"

./configure --prefix=$INSTALL_PATH --with-zlib=$ZLIB_PATH --with-pcre=$PCRE_PATH --with-cc=$CC_PATH --with-cpp=$CPP_PATH --with-cc-opt=$CC_POTS --with-ld-opt="-L /home/shanlink/Cross_compile/arm-hisiv200-linux/target/lib/"
  3. 好的，把以上内容做成一个运行脚本，运行，出现一个错误： 
    checking for OS
    
 + Linux 3.13.--generic x86_64
    
checking for C compiler ... found but is not working

./configure: error: C compiler /home/shanlink/Cross_compile/arm-hisiv200-linux/bin/arm-hisiv200-linux-gnueabi-gcc is not found

    解决办法就是：编辑auto/cc/name文件，在文件开头有如下一段，注释掉exit 1

    if [ "$NGX_PLATFORM" != win32 ]; then

    ngx_feature="C compiler"
    
    ngx_feature_name=
    
    ngx_feature_run=yes
    
    ngx_feature_incs=
    
    ngx_feature_path=
    
    ngx_feature_libs=
    
    ngx_feature_test=
    
    . auto/feature

    if [ $ngx_found = no ]; then
    
        echo
    
        echo $: error: C compiler $CC is not found
    
        echo
    
        #exit         注释掉这一行
    
    fi

fi
  4. 再次运行我们的配置脚本，这时候出现 
    checking for TCP_INFO ... found
    
checking for accept4() ... found
    
checking for int size ...objs/autotest: : objs/autotest: Syntax error: word unexpected (expecting ")")
    
  bytes

./configure: error: can not detect int size
    
cat: objs/autotest.c: No such file or directory

    解决方法：编辑auto/types/sizeof文件，找到

    ngx_test="$CC $CC_TEST_FLAGS $CC_AUX_FLAGS \
    
          -o $NGX_AUTOTEST $NGX_AUTOTEST.c $NGX_LD_OPT $ngx_feature_libs"

将的$CC改为x86上使用的gcc

ngx_test="gcc $CC_TEST_FLAGS $CC_AUX_FLAGS \
    
          -o $NGX_AUTOTEST $NGX_AUTOTEST.c $NGX_LD_OPT $ngx_feature_libs"
  5. 再次运行我们的配置脚本，这时应该可以顺利配置完成。
  6. 执行make，这时候会出现一个错误 
    checking for C compiler default output file name... a.out
    
checking for suffix of executables...
    
checking whether we are cross compiling... configure: error: in `/home/shanlink/Cross_compile/pcre-8.11':
    
configure: error: cannot run C compiled programs.
    
If you meant to cross compile, use `--host'.
    
See `config.log' for more details.
    
make[]: *** [/home/shanlink/Cross_compile/pcre-8.11//Makefile] Error 1
    
make[]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.'
    
make: *** [build] Error

    这个是由于nginx在编译时会同时配置pcre并且进行编译，而由于是交叉编译，pcre的配置时需要添加--host=arm-hisiv200-linux-gnueabi，因为是由nginx自动配置的，所以我们需要手动添加此选项于pcre，然后再make，此选项添加在

    文件：objs/Makefile

找到如下一段：
    
/home/shanlink/Cross_compile/pcre-8.11//Makefile:    objs/Makefile
    
    cd /home/shanlink/Cross_compile/pcre-8.11/ \
    
    && if [ -f Makefile ]; then $(MAKE) distclean; fi \
    
    && CC="$(CC)" CFLAGS="-O2 -fomit-frame-pointer -pipe " \
    
    ./configure --disable-shared 

将
    
    ./configure --disable-shared
    
改为
    
    ./configure --disable-shared --host=arm-hisiv200-linux-gnueabi(这个交叉编译器前缀填你们电脑上自己的)
  7. 如果遇到一下错误，原因是你们的linux系统是64位的，而arm上一般都是32位的，所以会有这个错误，解决办法就是重新装一个32位的linux系统。 
    src/core/ngx_slab.c: In function 'ngx_slab_alloc_locked':
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always true due to limited range of data type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always false due to limited range of data type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always true due to limited range of data type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always true due to limited range of data type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always false due to limited range of data type
    
src/core/ngx_slab.c:: error: left shift count >= width of type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: left shift count >= width of type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: left shift count >= width of type
    
src/core/ngx_slab.c: In function 'ngx_slab_free_locked':
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always false due to limited range of data type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: comparison is always false due to limited range of data type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c: In function 'ngx_slab_alloc_pages':
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: integer constant is too large for 'long' type
    
src/core/ngx_slab.c:: error: large integer implicitly truncated to unsigned type
    
make[]: *** [objs/src/core/ngx_slab.o] Error
    
make[]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.'
    
make: *** [build] Error
  8. 这时候继续make，还会出现两个错误，一个是 
    src/os/unix/ngx_errno.c: In function 'ngx_strerror':
    
src/os/unix/ngx_errno.c:: error: 'NGX_SYS_NERR' undeclared (first use in this function)
    
src/os/unix/ngx_errno.c:: error: (Each undeclared identifier is reported only once
    
src/os/unix/ngx_errno.c:: error: for each function it appears in.)
    
src/os/unix/ngx_errno.c: In function 'ngx_strerror_init':
    
src/os/unix/ngx_errno.c:: error: 'NGX_SYS_NERR' undeclared (first use in this function)
    
make[]: *** [objs/src/os/unix/ngx_errno.o] Error
    
make[]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.'
    
make: *** [build] Error

    解决方法就是打开objs/ngx_auto_config.h,添加

    #ifndef NGX_SYS_NERR
    
#define NGX_SYS_NERR    132
    
#endif

    另一个错误

    objs/src/event/ngx_event_accept.o: In function `ngx_event_accept':
    
/home/shanlink/Cross_compile/nginx-1.6./src/event/ngx_event_accept.c:: warning: warning: accept4 is not implemented and will always fail
    
objs/src/core/ngx_cycle.o: In function `ngx_init_cycle':
    
/home/shanlink/Cross_compile/nginx-1.6./src/core/ngx_cycle.c:: undefined reference to `ngx_shm_free'
    
/home/shanlink/Cross_compile/nginx-1.6./src/core/ngx_cycle.c:: undefined reference to `ngx_shm_alloc'
    
/home/shanlink/Cross_compile/nginx-1.6./src/core/ngx_cycle.c:: undefined reference to `ngx_shm_free'
    
objs/src/event/ngx_event.o: In function `ngx_event_module_init':
    
/home/shanlink/Cross_compile/nginx-1.6./src/event/ngx_event.c:: undefined reference to `ngx_shm_alloc'
    
collect2: ld returned  exit status
    
make[]: *** [objs/nginx] Error
    
make[]: Leaving directory `/home/shanlink/Cross_compile/nginx-1.6.'
    
make: *** [build] Error
    
shanlink@ubuntu:~/Cross_compile

    同样的，我们需要修改objs/ngx_auto_config.h文件，在文件中加入

    #ifndef NGX_HAVE_SYSVSHM
    
#define NGX_HAVE_SYSVSHM 1
    
#endif
  9. 好了，这时候make && make install就应该能编译过去了。
  10. 如果遇到其他编译问题，请参考：http://blog.****.net/fish43237/article/details/40515897

交叉编译squid

　　软件版本：squid-2.7-STABLE9

　　交叉编译器：arm-hisiv200-linux-gnueabi

　　系统：32位ubuntu

　　在对squid进行交叉编译时，需要用到x86版本的squid，所以我们要进行两个版本的编译。

  1. 首先编译x86版本的使用配置为 
    ./configure --prefix=X86_SQUID_PATH
  2. make && make install
  3. 进入到squid源码目录下的src/文件夹，有个cf_gen程序，备份起来，交叉编译时会用到。
  4. 建立一个arm-linux.cache文件，写入 
    ac_cv_epoll_works=
    
ac_cv_af_unix_large_dgram=
    
ac_cv_func_setresuid=
    
ac_cv_func_va_copy=
    
ac_cv_func___va_copy=
  5. 执行 
    #!/bin/bash

./configure --host=arm-hisiv200-linux-gnueabi --prefix=/home/shanlink/Cross_compile/squid_ccs/ --cache-file=arm-linux.cache

    这时应该是能够顺利通过的

  6. 执行make，会出现一个错误 
    ./cf_gen: cannot execute binary file
  7. 将之前备份的x86的cf_gen复制到src/目录下替换arm的
  8. 再次执行make，应该可以顺利通过编译
  9. make install
  10. 完成

相关文章