【文件属性】：
文件名称：Change Color of Component in Specific Display State Example
文件大小：57KB
文件格式：RAR
更新时间：2021-09-24 16:50:05
C# SolidWorks
Preconditions: Verify that the specified assembly and part exist.
Postconditions:
1. Opens the specified assembly document.
2. Examine the graphics area, then press F5.
3. Changes the selected component's, USB_cover1,
assembly-level color from the default red
to gray in the specified display state. This
is the overriding color level.
4. Examine the component in the graphics area, then press F5.
5. Changes the selected component's, USB_cover1, part-level
color from red to green in the specified display state of
the component part. This is not the overriding color level.
6. Closes, but does not save, the assembly document.
7. Opens the component's part document, USB_cover1.sldprt.
8. Examine the graphics area, then press F5.
9. Changes part's color from red to green in the specified
display state of the part. This is the overriding color
level.
10. Examine the graphics area, then press F5.
11. Closes, but does not save, the part document.
【文件预览】：
Change Color of Component in Specific Display State Example
----.vs()
--------Change Color of Component in Specific Display State Example()
----Change Color of Component in Specific Display State Example.sln(991B)
----test API()
--------bin()
--------Program.cs(14KB)
--------obj()
--------test API.csproj(7KB)
--------App.config(187B)
--------Properties()