【.Net Micro Framework PortingKit - 06】设置芯片时钟

时间:2022-09-24 19:15:55

上两篇《修改启动代码&重写向量表》《SRAM初始化&设置NVIC中断表偏移》文章中,我们设置了中断向量表,初始化了RAM,并重设了向量表的地址,本篇文章是相对重要的一篇,我们将设置芯片时钟。

   1、新建CortexM3.h头文件

   ./DeviceCode/Targets/Native/CortexM3目录中新建 CortexM3.h文件,并编写如下代码:

#ifndef _CORTEXM3_H_

#define _CORTEXM3_H_1

 

#include <cores/arm/include/cpu.h>

 

typedef volatile unsigned long  VU32;

typedef volatile unsigned short VU16;

typedef volatile unsigned char  VU8;

 

extern "C"

{

    void BootstrapCode_Clocks();

}

 

/*------------------------ Reset and Clock Control ---------------------------*/

struct CortexM3_RCC

{

    static const UINT32 c_Base = 0x40021000;

   

    static const    UINT8 FLAG_HSIRDY = ((UINT8)0x20);

    static const    UINT8 FLAG_HSERDY = ((UINT8)0x31);

 

    /****/ volatile UINT32  CR;

    static const    UINT32  CR_HSEBYP_Reset = ((UINT32)0xFFFBFFFF);

    static const    UINT32  CR_HSEBYP_Set = ((UINT32)0x00040000);

    static const    UINT32  CR_HSEON_Reset = ((UINT32)0xFFFEFFFF);

    static const    UINT32  CR_HSEON_Set = ((UINT32)0x00010000);

    static const    UINT32  CR_HSITRIM_Mask = ((UINT32)0xFFFFFF07);

 

    /****/ volatile UINT32  CFGR;

    static const    UINT32  CFGR_SYSCLK_Div1 = ((UINT32)0x00000000);

    static const    UINT32  CFGR_SYSCLK_Div2 = ((UINT32)0x00000080);

    static const    UINT32  CFGR_SYSCLK_Div4 = ((UINT32)0x00000090);

    static const    UINT32  CFGR_SYSCLK_Div8 = ((UINT32)0x000000A0);

    static const    UINT32  CFGR_SYSCLK_Div16 = ((UINT32)0x000000B0);

    static const    UINT32  CFGR_HCLK_Div1 = ((UINT32)0x00000000);

    static const    UINT32  CFGR_HCLK_Div2 = ((UINT32)0x00000400);

    static const    UINT32  CFGR_HCLK_Div4 = ((UINT32)0x00000500);

    

    // 省略部分代码 .....

   

    /****/ volatile UINT32  APB1RSTR;

    /****/ volatile UINT32  AHBENR;

    /****/ volatile UINT32  BDCR;

    /****/ volatile UINT32  CSR;

 

    static void Initialize();

    static bool GetFlagStatus(UINT8 Flag);

};

 

struct CortexM3

{

    static CortexM3_RCC  & RCC()   { return *(CortexM3_RCC *)(size_t)(CortexM3_RCC::c_Base); }

};

 

#endif // _CORTEXM3_H_1

 

 

   2、编写BootStrap代码

   我们从./DeviceCode/Drivers/Stubs/Processor/stubs_bootstrap目录到./DeviceCode/Targets/Native/CortexM3/DeviceCode,并修改目录的名字为BootStrap,下一步我们在BootStrap.cpp文件编写如下代码:

   #include <tinyhal.h>

#include "../CortexM3.h"

 

//--//

 

#pragma arm section code = "SectionForBootstrapOperations"

 

void __section(SectionForBootstrapOperations) CortexM3_RCC::Initialize (void)

{

         CortexM3_RCC &RCC = CortexM3::RCC();

 

        // RCC system reset(for debug purpose)

         /* Set HSION bit */

         RCC.CR |= (UINT32)0x00000001;

 

         /* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], ADCPRE[1:0] and MCO[2:0] bits */

         RCC.CFGR &= (UINT32)0xF8FF0000;

 

         /* Reset HSEON, CSSON and PLLON bits */

         RCC.CR &= (UINT32)0xFEF6FFFF;

 

         // 省略部分代码 .....

  

         /* Enable GPIOA, GPIOB, GPIOF, GPIOG and AFIO clocks */

         RCC.APB2ENR |= CortexM3_RCC::APB2RSTR_GPIOA | CortexM3_RCC::APB2RSTR_GPIOB | CortexM3_RCC::APB2RSTR_GPIOF |CortexM3_RCC::APB2RSTR_GPIOG |CortexM3_RCC::APB2RSTR_AFIO;

}

 

bool __section(SectionForBootstrapOperations)  CortexM3_RCC::GetFlagStatus(UINT8 Flag)

{

         UINT32 tmp = 0;

         UINT32 statusreg = 0;

         CortexM3_RCC &RCC = CortexM3::RCC();

 

         /* Get the RCC register index */

         tmp = Flag >> 5;

         if (tmp == 1)               /* The flag to check is in CR register */

         {

                   statusreg = RCC.CR;

         }

         else if (tmp == 2)          /* The flag to check is in BDCR register */

         {

                   statusreg = RCC.BDCR;

         }

         else                       /* The flag to check is in CSR register */

         {

                   statusreg = RCC.CSR;

         }

 

         /* Get the flag position */

         tmp = Flag & ((UINT8)0x1F);

         return ((statusreg & ((UINT32)1 << tmp)) != 0);

}

 

 

void __section(SectionForBootstrapOperations) BootstrapCode_Clocks()

{

     CortexM3_RCC::Initialize();

}

 

extern "C"

{

 

void __section(SectionForBootstrapOperations) BootstrapCode()

{

          BootstrapCode_Clocks();

}

 

}

 

#pragma arm section code

 

  3、修改./Solutions/STM3210E/NativeSample/NativeSample.proj文件

   NativeSample.proj文件中作如下修改: 

 

  <ItemGroup>

    <RequiredProjects Include="$(SPOCLIENT)/DeviceCode/Targets/Native/CortexM3/DeviceCode/stubs_bootstrap/dotNetMF.proj" />

    <DriverLibs Include="cpu_bootstrap_stubs.$(LIB_EXT)" />

  </ItemGroup>

  修改为:

  <ItemGroup>

    <RequiredProjects Include="$(SPOCLIENT)/DeviceCode/Targets/Native/CortexM3/DeviceCode/BootStrap/dotNetMF.proj" />

    <DriverLibs Include="BootStrap.$(LIB_EXT)" />

  </ItemGroup>

 

  4、编译修改并调试运行,我想这次会有很大的成就感,因为LED闪烁的节奏明显的加快了,我们的CPU在高速运行了!

 

       即将过去的2010年的前三天,对我来说是辛苦的三天,平均每天工作16个小时以上,不仅编写了相关代码,还写了以上六篇文章。希望我的这些努力能点燃.Net Micro Framework爱好者心中的热情,动起手来一起移植.Net Micro Framework,其实这对自己的嵌入式开发功力的提高也大有裨益。明天就要上班了,我将又回到开发Wifi相关接口的工作上来,后续的文章我想只有到下周末才能相见了,到那时我们将编写串口驱动,系统的一些调试信息将可以通过串口传输给PC机上的串口调试程序,这一步将是关键的一步,非常值得的期待,希望我能顺利完成这步工作!