[LabVIEW] Scope: Sound Card Based Oscilloscope and Spectrum Analyzer

【文件属性】：
文件名称：[LabVIEW] Scope: Sound Card Based Oscilloscope and Spectrum Analyzer
文件大小：3.84MB
文件格式：ZIP
更新时间：2016-11-24 23:39:27
LabVIEW Oscilloscope VI Overview The VI Scope is a software rendition of the following three popular laboratory instruments: Oscilloscope Function Generator Spectrum Analyzer Description This VI uses the stereo \headphone" and \line input" jacks for two channels of analog input and two channels of analog output respectively. The VI Scope is written in LabVIEW and the source code is available online for users who have access to LabVIEW and wishes to modify the program's behavior. Refer to the help.pdf document, located in the attchments sections, for further description of the VI, limitations of the VI, and also instructions for using the VI. Steps to Implement or Execute Code Download the attached scope.zip file Unzip and save files on your computer Open the "help.pdf" file and follow the given instructions Run the VI Requirements to Run Software LabVIEW 8.6 or later NI DAQmx 8.7.2 or later Hardware Line input cables

【文件预览】：
swept_sine_state.vi
psd_state_global.vi
scope_icon.ico
scope.lvproj
oscilloscope.vi
oscilloscope.lvproj
psdgraph_array_global.vi
waveform_to_array.vi
freq_resp_no_coher.vi
write_waveform_to_file.vi
spectrum_to_data_array.vi
flag_read.vi
write_spectrum_to_file.vi
scope.vi
currdisp2.vi
flag_array.vi
currdisp1.vi
help.pdf
swept_freq_calc.vi
flag_write.vi
waveform_global.vi