【文件属性】：
文件名称：Cisco BTS 10200 Softswitch Operations Manual
文件大小：4.32MB
文件格式：PDF
更新时间：2017-11-03 08:07:15
BTS
This document describes the steps used to provision and maintain the Cisco BTS 10200 Softswitch Call
Agent (CA), Feature Server (FS), Element Management System (EMS), and Bulk Data Management
System (BDMS) for Release 3.5.2 and 3.5.3. Basic hardware and operator interfaces are also covered.
The following modifications were made to this document since the last release. It is not an inclusive list.
• Chapter 1: Updated Hardware and Rack Configuration sections. Added Hardware Monitoring and
Alarm Panel information. Updated the procedures for replacing a disk.
• Chapter 2: Updated Operator Interfaces section. Removed references to Telnet, added Secure Shell.
• Chapter 3: New
• Chapter 4: Reorganized and updated entire chapter.
• Chapter 5: Added Equal Access provisioning. Updated Call Agent section.
• Chapter 6: Updated entire chapter.
• Chapters 7 through 11: Updated and reorganized. Termhandler information added to Chapter 8.
• Chapter 12: New
• Chapter 13: Updated
• Chapters 14 and 15: New
• Chapter 16: Updated status and control command usage, added BDMS commands.
• Chapter 17: Updated status and control command usage, added command responses.
• Chapter 18: Updated and reorganized.
• Chapter 19: Updated
• Chapters 20 through 25: New
• Chapter 21: Updated
• Updated Call Trace Summary in Chapter 24. No HTML report is generated.
• Changed Calling Name Delivery Blocking description.
• Added procedure for Calling Number Delivery Blocking.
• Added note to Chapter 8 regarding the “unknown” state when provisioning SS7 trunks.
• Added disk replacement procedure to Chapter 1: Hardware.
• Added procedure for alternate Omni provisioning method for automatic callback and automatic
recall.