【文件属性】:
文件名称:SBE_MP177(西门子操作盘MP177使用).pdf
文件大小:3.04MB
文件格式:PDF
更新时间:2023-04-29 16:38:12
SIMATIC HMI MP 177 (WinCC
MP 177 (WinCC flexible)
Ordernumber 6AV6691-1DP02-0AB0
Preface
Purpose of the operating instructions
These operating instructions provide information based on the requirements defined by DIN
EN 62079 for mechanical engineering documentation. This information relates to the place of
use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for the following user groups:
● Operators
The operator operates and monitors the system during the process control phase. The
following chapters are relevant to the operator:
– Operator controls and displays
– Operating a project
– Operating recipes
– Operating alarms
● Commissioning engineers
The commissioning engineer integrates the HMI device into the system and ensures the
operating capability of the HMI device for the process control phase.
All the operating instructions are relevant for the commissioning engineer.
Depending on the use of the HMI device, certain chapters may not be of relevance to the
commissioning engineer, e.g. the chapter "Maintenance and care".
● Service technicians
Service technicians rectify faults that occur during the process control phase.
The entire set of operating instructions is relevant to service technicians in principle.
Depending on the use of the HMI device, however, certain chapters may not be relevant
to them, e.g., the chapter on "Maintenance and care".
● Maintenance technicians
Maintenance technicians carry out regular maintenance work during the process control
phase. The chapter on "Maintenance and care" is relevant to maintenance technicians.
The chapter "Safety instructions, standards and notes" should be particularly heeded by all
person groups.
The help integrated in WinCC flexible, the WinCC flexible Information System, contains
detailed information. The information system contains instructions, examples and reference
information in electronic form.