下面是韦老师的uboot移植攻略:
A. 开发板的相关拷贝与修改
1. 在board文件夹下面, 将原来的smdk2410复制为100ask24x0目录, 并将smdk2410.c改名为100ask24x0.c
2. 将include/configs/smdk2410.h复制为100ask24x0.h
或者直接copy下面:
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
* Gary Jennejohn <gj@denx.de>
* David Mueller <d.mueller@elsoft.ch>
*
* Configuation settings for the SAMSUNG SMDK2410 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/ #ifndef __CONFIG_H
#define __CONFIG_H /*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ /* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* the SMDK2410 has 12MHz input clock */
//#define CONFIG_SYS_CLK_FREQ 16934400 /* the SMDK2410 has 12MHz input clock */ #define USE_920T_MMU 1 #define CONFIG_USB_DEVICE 1 #ifdef CONFIG_USB_DEVICE
#define CONFIG_USE_IRQ 1
#endif #define CONFIG_JFFS2_CMDLINE 1
#define CONFIG_JFFS2_NAND 1 #define MTDIDS_DEFAULT "nand0=nandflash0"
#define MTDPARTS_DEFAULT "mtdparts=nandflash0:256k@0(bootloader)," \
"128k(params)," \
"2m(kernel)," \
"-(root)" /*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /*
* Hardware drivers
*/
#if 1
#if 0
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
#define CS8900_BASE 0x19000300
#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
#endif #if !defined(CONFIG_DRIVER_CS8900)
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_USE_16BIT 1
#define CONFIG_DM9000_BASE 0x20000000
#define DM9000_IO 0x20000000
#define DM9000_DATA 0x20000004
#endif
#endif
/*
* select serial console configuration
*/
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ /************************************************************
* RTC
************************************************************/
#define CONFIG_RTC_S3C24X0 1 /* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 /* for tag(s) to transfer message to kernel, www.100ask.net */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_CMDLINE_TAG 1 /***********************************************************
* Command definition
***********************************************************/
#define CONFIG_COMMANDS \
((CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
/* Start: by www.100ask.net */ \
CFG_CMD_PING | \
CFG_CMD_JFFS2 | \
CFG_CMD_NAND | \
/* End: by www.100ask.net */ \
/*CFG_CMD_EEPROM |*/ \
/*CFG_CMD_I2C |*/ \
/*CFG_CMD_USB |*/ \
CFG_CMD_REGINFO | \
CFG_CMD_DATE | \
CFG_CMD_ELF)) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.7.17
#define CONFIG_SERVERIP 192.168.7.11
/*#define CONFIG_BOOTFILE "elinos-lart" */
#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x30007FC0 kernel; bootm 0x30007FC0" #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif /*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "OpenJTAG> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x30000000 /* memtest works on */
#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR 0x33000000 /* default load address */ /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
/* it to wrap 100 times (total 1562500) to get 1 sec. */
#define CFG_HZ 1562500 /* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*-----------------------------------------------------------------------
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif /*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define CFG_FLASH_BASE PHYS_FLASH_1
#define CFG_MONITOR_BASE PHYS_FLASH_1 /*-----------------------------------------------------------------------
* FLASH and environment organization
*/ #if 0
#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
#endif
//#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#ifdef CONFIG_AMD_LV800
#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
#endif
#ifdef CONFIG_AMD_LV400
#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
#endif #define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_FLASH_CFI_LEGACY 1 #ifdef CFG_FLASH_CFI_DRIVER
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
#define CFG_FLASH_CFI_WIDTH 0x02 /* FLASH_CFI_16BIT */
#endif /* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ //#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ /*-----------------------------------------------------------------------
* NAND flash settings
*/
#define CFG_NAND_BASE 0
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1 #endif /* __CONFIG_H */
3. 修改根的Makefile, 增加有关100ask24x0_config的脚本段
100ask24x0_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t 100ask24x0 NULL s3c24x0
4. 修改board/100ask24x0/Makefile中的COBJS改成100ask24x0.o
B. SDRAM的配置
1. 修改board/100ask24x0/lowlevel_init.S
#define REFCNT 0x4f4 @原本是1113改成0x4f4(1268)
C. 增加对S3C2440的支持
1. 修改board/100ask24x0/100ask24x0.c
具体代码可以参考patch文件
最后, 100ask24x0.c是这样的:
#include <common.h>
#include <s3c2410.h> DECLARE_GLOBAL_DATA_PTR; /*
* Miscellaneous platform dependent initialisations
*/ int board_init (void)
{
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); /* set up the I/O ports */
gpio->GPACON = 0x007FFFFF;
gpio->GPBCON = 0x00044555;
gpio->GPBUP = 0x000007FF;
gpio->GPCCON = 0xAAAAAAAA;
gpio->GPCUP = 0x0000FFFF;
gpio->GPDCON = 0xAAAAAAAA;
gpio->GPDUP = 0x0000FFFF;
gpio->GPECON = 0xAAAAAAAA;
gpio->GPEUP = 0x0000FFFF;
gpio->GPFCON = 0x000055AA;
gpio->GPFUP = 0x000000FF;
gpio->GPGCON = 0xFF95FFBA;
gpio->GPGUP = 0x0000FFFF;
gpio->GPHCON = 0x002AFAAA;
gpio->GPHUP = 0x000007FF; /* support both of S3C2410 and S3C2440, by www.100ask.net */
if (isS3C2410)
{
/* arch number of SMDK2410-Board */
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
}
else
{
/* arch number of SMDK2440-Board */
gd->bd->bi_arch_number = MACH_TYPE_S3C2440;
} /* adress of boot parameters */
gd->bd->bi_boot_params = 0x30000100;
#if 0
icache_enable();
dcache_enable();
#endif
return 0;
} int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0;
} ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
info->portwidth = CFG_FLASH_CFI_WIDTH;
info->chipwidth = CFG_FLASH_CFI_WIDTH;
info->interface = FLASH_CFI_X16;
return 1;
}
2. 修改cpu/arm920t/s3c24x0/speed.c
/*
* (C) Copyright 2001-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/ /* This code should work for both the S3C2400 and the S3C2410
* as they seem to have the same PLL and clock machinery inside.
* The different address mapping is handled by the s3c24xx.h files below.
*/ #include <common.h>
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) #if defined(CONFIG_S3C2400)
#include <s3c2400.h>
#elif defined(CONFIG_S3C2410)
#include <s3c2410.h>
#endif DECLARE_GLOBAL_DATA_PTR; #define MPLL 0
#define UPLL 1 /* ------------------------------------------------------------------------- */
/* NOTE: This describes the proper use of this file.
*
* CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
*
* get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
* the specified bus in HZ.
*/
/* ------------------------------------------------------------------------- */ static ulong get_PLLCLK(int pllreg)
{
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
ulong r, m, p, s; if (pllreg == MPLL)
r = clk_power->MPLLCON;
else if (pllreg == UPLL)
r = clk_power->UPLLCON;
else
hang(); m = ((r & 0xFF000) >> 12) + 8;
p = ((r & 0x003F0) >> 4) + 2;
s = r & 0x3; /* support both of S3C2410 and S3C2440, by www.100ask.net */
if (isS3C2410)
return((CONFIG_SYS_CLK_FREQ * m) / (p << s));
else
return((CONFIG_SYS_CLK_FREQ * m * 2) / (p << s)); /* S3C2440 */
} /* return FCLK frequency */
ulong get_FCLK(void)
{
return(get_PLLCLK(MPLL));
} /* for s3c2440 */
#define S3C2440_CLKDIVN_PDIVN (1<<0)
#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
#define S3C2440_CLKDIVN_UCLK (1<<3) #define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
#define S3C2440_CAMDIVN_DVSEN (1<<12) /* return HCLK frequency */
ulong get_HCLK(void)
{
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
unsigned long clkdiv;
unsigned long camdiv;
int hdiv = 1; /* support both of S3C2410 and S3C2440, by www.100ask.net */
if (isS3C2410)
return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK());
else
{
clkdiv = clk_power->CLKDIVN;
camdiv = clk_power->CAMDIVN; /* work out clock scalings */ switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
case S3C2440_CLKDIVN_HDIVN_1:
hdiv = 1;
break; case S3C2440_CLKDIVN_HDIVN_2:
hdiv = 2;
break; case S3C2440_CLKDIVN_HDIVN_4_8:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
break; case S3C2440_CLKDIVN_HDIVN_3_6:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
break;
} return get_FCLK() / hdiv;
}
} /* return PCLK frequency */
ulong get_PCLK(void)
{
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
unsigned long clkdiv;
unsigned long camdiv;
int hdiv = 1; /* support both of S3C2410 and S3C2440, by www.100ask.net */
if (isS3C2410)
return((clk_power->CLKDIVN & 0x1) ? get_HCLK()/2 : get_HCLK());
else
{
clkdiv = clk_power->CLKDIVN;
camdiv = clk_power->CAMDIVN; /* work out clock scalings */ switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
case S3C2440_CLKDIVN_HDIVN_1:
hdiv = 1;
break; case S3C2440_CLKDIVN_HDIVN_2:
hdiv = 2;
break; case S3C2440_CLKDIVN_HDIVN_4_8:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
break; case S3C2440_CLKDIVN_HDIVN_3_6:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
break;
} return get_FCLK() / hdiv / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
}
} /* return UCLK frequency */
ulong get_UCLK(void)
{
return(get_PLLCLK(UPLL));
} #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
3. 选择NorFlash的型号
jz2440的板子上, Nor是2M的, 型号是29LV160, 首先修改board/100ask24x0/Makefile， 将flash.o去掉, 确定include/configs/100ask24x0.h文件中, 有:
#define CFG_FLASH_CFI_DRIVER 1
4. 修改 include/s3c2410.h
/*
* (C) Copyright 2003
* David M黮ler ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/ /************************************************
* NAME : s3c2410.h
* Version : 31.3.2003
*
* Based on S3C2410X User's manual Rev 1.1
************************************************/ #ifndef __S3C2410_H__
#define __S3C2410_H__ #define S3C24X0_UART_CHANNELS 3
#define S3C24X0_SPI_CHANNELS 2 /* S3C2410 only supports 512 Byte HW ECC */
#define S3C2410_ECCSIZE 512
#define S3C2410_ECCBYTES 3 typedef enum {
S3C24X0_UART0,
S3C24X0_UART1,
S3C24X0_UART2
} S3C24X0_UARTS_NR; /* S3C2410 device base addresses */
#define S3C24X0_MEMCTL_BASE 0x48000000
#define S3C24X0_USB_HOST_BASE 0x49000000
#define S3C24X0_INTERRUPT_BASE 0x4A000000
#define S3C24X0_DMA_BASE 0x4B000000
#define S3C24X0_CLOCK_POWER_BASE 0x4C000000
#define S3C24X0_LCD_BASE 0x4D000000
#define S3C2410_NAND_BASE 0x4E000000
#define S3C24X0_UART_BASE 0x50000000
#define S3C24X0_TIMER_BASE 0x51000000
#define S3C24X0_USB_DEVICE_BASE 0x52000140
#define S3C24X0_WATCHDOG_BASE 0x53000000
#define S3C24X0_I2C_BASE 0x54000000
#define S3C24X0_I2S_BASE 0x55000000
#define S3C24X0_GPIO_BASE 0x56000000
#define S3C24X0_RTC_BASE 0x57000000
#define S3C2410_ADC_BASE 0x58000000
#define S3C24X0_SPI_BASE 0x59000000
#define S3C2410_SDI_BASE 0x5A000000 /* include common stuff */
#include <s3c24x0.h> static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void)
{
return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
}
static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void)
{
return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
}
static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void)
{
return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
}
static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void)
{
return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
}
static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void)
{
return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
}
static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void)
{
return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
}
static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void)
{
return (S3C2410_NAND * const)S3C2410_NAND_BASE;
} /* for s3c2440, www.100ask.net */
static inline S3C2440_NAND * const S3C2440_GetBase_NAND(void)
{
return (S3C2440_NAND * const)S3C2410_NAND_BASE;
}
static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
{
return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
}
static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void)
{
return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
}
static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void)
{
return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
}
static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void)
{
return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
}
static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void)
{
return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
}
static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void)
{
return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
}
static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void)
{
return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
}
static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void)
{
return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
}
static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void)
{
return (S3C2410_ADC * const)S3C2410_ADC_BASE;
}
static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void)
{
return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
}
static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void)
{
return (S3C2410_SDI * const)S3C2410_SDI_BASE;
} /* add by thisway.diy */
#define _ISR_STARTADDRESS ((unsigned)isr_handle_array) #define ISR_EINT0_OFT 0
#define ISR_EINT1_OFT 1
#define ISR_EINT2_OFT 2
#define ISR_EINT3_OFT 3
#define ISR_EINT4_7_OFT 4
#define ISR_EINT8_23_OFT 5
#define ISR_NOTUSED6_OFT 6
#define ISR_BAT_FLT_OFT 7
#define ISR_TICK_OFT 8
#define ISR_WDT_OFT 9
#define ISR_TIMER0_OFT 10
#define ISR_TIMER1_OFT 11
#define ISR_TIMER2_OFT 12
#define ISR_TIMER3_OFT 13
#define ISR_TIMER4_OFT 14
#define ISR_UART2_OFT 15
#define ISR_LCD_OFT 16
#define ISR_DMA0_OFT 17
#define ISR_DMA1_OFT 18
#define ISR_DMA2_OFT 19
#define ISR_DMA3_OFT 20
#define ISR_SDI_OFT 21
#define ISR_SPI0_OFT 22
#define ISR_UART1_OFT 23
#define ISR_NOTUSED24_OFT 24
#define ISR_USBD_OFT 25
#define ISR_USBH_OFT 26
#define ISR_IIC_OFT 27
#define ISR_UART0_OFT 28
#define ISR_SPI1_OFT 29
#define ISR_RTC_OFT 30
#define ISR_ADC_OFT 31 /* ISR */
#define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0))
#define pISR_UNDEF (*(unsigned *)(_ISR_STARTADDRESS+0x4))
#define pISR_SWI (*(unsigned *)(_ISR_STARTADDRESS+0x8))
#define pISR_PABORT (*(unsigned *)(_ISR_STARTADDRESS+0xC))
#define pISR_DABORT (*(unsigned *)(_ISR_STARTADDRESS+0x10))
#define pISR_RESERVED (*(unsigned *)(_ISR_STARTADDRESS+0x14))
#define pISR_IRQ (*(unsigned *)(_ISR_STARTADDRESS+0x18))
#define pISR_FIQ (*(unsigned *)(_ISR_STARTADDRESS+0x1C)) #define pISR_EINT0 (*(unsigned *)(_ISR_STARTADDRESS+0x20))
#define pISR_EINT1 (*(unsigned *)(_ISR_STARTADDRESS+0x24))
#define pISR_EINT2 (*(unsigned *)(_ISR_STARTADDRESS+0x28))
#define pISR_EINT3 (*(unsigned *)(_ISR_STARTADDRESS+0x2C))
#define pISR_EINT4_7 (*(unsigned *)(_ISR_STARTADDRESS+0x30))
#define pISR_EINT8_23 (*(unsigned *)(_ISR_STARTADDRESS+0x34))
#define pISR_BAT_FLT (*(unsigned *)(_ISR_STARTADDRESS+0x3C))
#define pISR_TICK (*(unsigned *)(_ISR_STARTADDRESS+0x40))
#define pISR_WDT (*(unsigned *)(_ISR_STARTADDRESS+0x44))
#define pISR_TIMER0 (*(unsigned *)(_ISR_STARTADDRESS+0x48))
#define pISR_TIMER1 (*(unsigned *)(_ISR_STARTADDRESS+0x4C))
#define pISR_TIMER2 (*(unsigned *)(_ISR_STARTADDRESS+0x50))
#define pISR_TIMER3 (*(unsigned *)(_ISR_STARTADDRESS+0x54))
#define pISR_TIMER4 (*(unsigned *)(_ISR_STARTADDRESS+0x58))
#define pISR_UART2 (*(unsigned *)(_ISR_STARTADDRESS+0x5C))
#define pISR_NOTUSED (*(unsigned *)(_ISR_STARTADDRESS+0x60))
#define pISR_DMA0 (*(unsigned *)(_ISR_STARTADDRESS+0x64))
#define pISR_DMA1 (*(unsigned *)(_ISR_STARTADDRESS+0x68))
#define pISR_DMA2 (*(unsigned *)(_ISR_STARTADDRESS+0x6C))
#define pISR_DMA3 (*(unsigned *)(_ISR_STARTADDRESS+0x70))
#define pISR_SDI (*(unsigned *)(_ISR_STARTADDRESS+0x74))
#define pISR_SPI0 (*(unsigned *)(_ISR_STARTADDRESS+0x78))
#define pISR_UART1 (*(unsigned *)(_ISR_STARTADDRESS+0x7C))
#define pISR_USBD (*(unsigned *)(_ISR_STARTADDRESS+0x84))
#define pISR_USBH (*(unsigned *)(_ISR_STARTADDRESS+0x88))
#define pISR_IIC (*(unsigned *)(_ISR_STARTADDRESS+0x8C))
#define pISR_UART0 (*(unsigned *)(_ISR_STARTADDRESS+0x90))
#define pISR_SPI1 (*(unsigned *)(_ISR_STARTADDRESS+0x94))
#define pISR_RTC (*(unsigned *)(_ISR_STARTADDRESS+0x98))
#define pISR_ADC (*(unsigned *)(_ISR_STARTADDRESS+0xA0)) // PENDING BIT
#define BIT_EINT0 (0x1)
#define BIT_EINT1 (0x1<<1)
#define BIT_EINT2 (0x1<<2)
#define BIT_EINT3 (0x1<<3)
#define BIT_EINT4_7 (0x1<<4)
#define BIT_EINT8_23 (0x1<<5)
#define BIT_CAM (0x1<<6) // Added for 2440.
#define BIT_BAT_FLT (0x1<<7)
#define BIT_TICK (0x1<<8)
#define BIT_WDT_AC97 (0x1<<9)
#define BIT_TIMER0 (0x1<<10)
#define BIT_TIMER1 (0x1<<11)
#define BIT_TIMER2 (0x1<<12)
#define BIT_TIMER3 (0x1<<13)
#define BIT_TIMER4 (0x1<<14)
#define BIT_UART2 (0x1<<15)
#define BIT_LCD (0x1<<16)
#define BIT_DMA0 (0x1<<17)
#define BIT_DMA1 (0x1<<18)
#define BIT_DMA2 (0x1<<19)
#define BIT_DMA3 (0x1<<20)
#define BIT_SDI (0x1<<21)
#define BIT_SPI0 (0x1<<22)
#define BIT_UART1 (0x1<<23)
#define BIT_NFCON (0x1<<24) // Added for 2440.
#define BIT_USBD (0x1<<25)
#define BIT_USBH (0x1<<26)
#define BIT_IIC (0x1<<27)
#define BIT_UART0 (0x1<<28)
#define BIT_SPI1 (0x1<<29)
#define BIT_RTC (0x1<<30)
#define BIT_ADC (0x1<<31)
#define BIT_ALLMSK (0xffffffff) #define BIT_SUB_ALLMSK (0x7fff)
#define BIT_SUB_AC97 (0x1<<14)
#define BIT_SUB_WDT (0x1<<13)
#define BIT_SUB_CAM_S (0x1<<12) // Added for 2440.
#define BIT_SUB_CAM_C (0x1<<11) // Added for 2440.
#define BIT_SUB_ADC (0x1<<10)
#define BIT_SUB_TC (0x1<<9)
#define BIT_SUB_ERR2 (0x1<<8)
#define BIT_SUB_TXD2 (0x1<<7)
#define BIT_SUB_RXD2 (0x1<<6)
#define BIT_SUB_ERR1 (0x1<<5)
#define BIT_SUB_TXD1 (0x1<<4)
#define BIT_SUB_RXD1 (0x1<<3)
#define BIT_SUB_ERR0 (0x1<<2)
#define BIT_SUB_TXD0 (0x1<<1)
#define BIT_SUB_RXD0 (0x1<<0) #endif /*__S3C2410_H__*/
修改include/s2c24x0.h:
/*
* (C) Copyright 2003
* David M黮ler ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/ /************************************************
* NAME : s3c24x0.h
* Version : 31.3.2003
*
* common stuff for SAMSUNG S3C24X0 SoC
************************************************/ #ifndef __S3C24X0_H__
#define __S3C24X0_H__ typedef volatile u8 S3C24X0_REG8;
typedef volatile u16 S3C24X0_REG16;
typedef volatile u32 S3C24X0_REG32; /* Memory controller (see manual chapter 5) */
typedef struct {
S3C24X0_REG32 BWSCON;
S3C24X0_REG32 BANKCON[8];
S3C24X0_REG32 REFRESH;
S3C24X0_REG32 BANKSIZE;
S3C24X0_REG32 MRSRB6;
S3C24X0_REG32 MRSRB7;
} /*__attribute__((__packed__))*/ S3C24X0_MEMCTL; /* USB HOST (see manual chapter 12) */
typedef struct {
S3C24X0_REG32 HcRevision;
S3C24X0_REG32 HcControl;
S3C24X0_REG32 HcCommonStatus;
S3C24X0_REG32 HcInterruptStatus;
S3C24X0_REG32 HcInterruptEnable;
S3C24X0_REG32 HcInterruptDisable;
S3C24X0_REG32 HcHCCA;
S3C24X0_REG32 HcPeriodCuttendED;
S3C24X0_REG32 HcControlHeadED;
S3C24X0_REG32 HcControlCurrentED;
S3C24X0_REG32 HcBulkHeadED;
S3C24X0_REG32 HcBuldCurrentED;
S3C24X0_REG32 HcDoneHead;
S3C24X0_REG32 HcRmInterval;
S3C24X0_REG32 HcFmRemaining;
S3C24X0_REG32 HcFmNumber;
S3C24X0_REG32 HcPeriodicStart;
S3C24X0_REG32 HcLSThreshold;
S3C24X0_REG32 HcRhDescriptorA;
S3C24X0_REG32 HcRhDescriptorB;
S3C24X0_REG32 HcRhStatus;
S3C24X0_REG32 HcRhPortStatus1;
S3C24X0_REG32 HcRhPortStatus2;
} /*__attribute__((__packed__))*/ S3C24X0_USB_HOST; /* INTERRUPT (see manual chapter 14) */
typedef struct {
S3C24X0_REG32 SRCPND;
S3C24X0_REG32 INTMOD;
S3C24X0_REG32 INTMSK;
S3C24X0_REG32 PRIORITY;
S3C24X0_REG32 INTPND;
S3C24X0_REG32 INTOFFSET;
#ifdef CONFIG_S3C2410
S3C24X0_REG32 SUBSRCPND;
S3C24X0_REG32 INTSUBMSK;
#endif
} /*__attribute__((__packed__))*/ S3C24X0_INTERRUPT; /* DMAS (see manual chapter 8) */
typedef struct {
S3C24X0_REG32 DISRC;
#ifdef CONFIG_S3C2410
S3C24X0_REG32 DISRCC;
#endif
S3C24X0_REG32 DIDST;
#ifdef CONFIG_S3C2410
S3C24X0_REG32 DIDSTC;
#endif
S3C24X0_REG32 DCON;
S3C24X0_REG32 DSTAT;
S3C24X0_REG32 DCSRC;
S3C24X0_REG32 DCDST;
S3C24X0_REG32 DMASKTRIG;
#ifdef CONFIG_S3C2400
S3C24X0_REG32 res[1];
#endif
#ifdef CONFIG_S3C2410
S3C24X0_REG32 res[7];
#endif
} /*__attribute__((__packed__))*/ S3C24X0_DMA; typedef struct {
S3C24X0_DMA dma[4];
} /*__attribute__((__packed__))*/ S3C24X0_DMAS; /* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */
/* (see S3C2410 manual chapter 7) */
typedef struct {
S3C24X0_REG32 LOCKTIME;
S3C24X0_REG32 MPLLCON;
S3C24X0_REG32 UPLLCON;
S3C24X0_REG32 CLKCON;
S3C24X0_REG32 CLKSLOW;
S3C24X0_REG32 CLKDIVN;
S3C24X0_REG32 CAMDIVN; /* for s3c2440, by www.100ask.net */
} /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER; /* LCD CONTROLLER (see manual chapter 15) */
typedef struct {
S3C24X0_REG32 LCDCON1;
S3C24X0_REG32 LCDCON2;
S3C24X0_REG32 LCDCON3;
S3C24X0_REG32 LCDCON4;
S3C24X0_REG32 LCDCON5;
S3C24X0_REG32 LCDSADDR1;
S3C24X0_REG32 LCDSADDR2;
S3C24X0_REG32 LCDSADDR3;
S3C24X0_REG32 REDLUT;
S3C24X0_REG32 GREENLUT;
S3C24X0_REG32 BLUELUT;
S3C24X0_REG32 res[8];
S3C24X0_REG32 DITHMODE;
S3C24X0_REG32 TPAL;
#ifdef CONFIG_S3C2410
S3C24X0_REG32 LCDINTPND;
S3C24X0_REG32 LCDSRCPND;
S3C24X0_REG32 LCDINTMSK;
S3C24X0_REG32 LPCSEL;
#endif
} /*__attribute__((__packed__))*/ S3C24X0_LCD; /* NAND FLASH (see S3C2410 manual chapter 6) */
typedef struct {
S3C24X0_REG32 NFCONF;
S3C24X0_REG32 NFCMD;
S3C24X0_REG32 NFADDR;
S3C24X0_REG32 NFDATA;
S3C24X0_REG32 NFSTAT;
S3C24X0_REG32 NFECC;
} /*__attribute__((__packed__))*/ S3C2410_NAND; /* NAND FLASH (see S3C2440 manual chapter 6, www.100ask.net) */
typedef struct {
S3C24X0_REG32 NFCONF;
S3C24X0_REG32 NFCONT;
S3C24X0_REG32 NFCMD;
S3C24X0_REG32 NFADDR;
S3C24X0_REG32 NFDATA;
S3C24X0_REG32 NFMECCD0;
S3C24X0_REG32 NFMECCD1;
S3C24X0_REG32 NFSECCD;
S3C24X0_REG32 NFSTAT;
S3C24X0_REG32 NFESTAT0;
S3C24X0_REG32 NFESTAT1;
S3C24X0_REG32 NFMECC0;
S3C24X0_REG32 NFMECC1;
S3C24X0_REG32 NFSECC;
S3C24X0_REG32 NFSBLK;
S3C24X0_REG32 NFEBLK;
} /*__attribute__((__packed__))*/ S3C2440_NAND; /* UART (see manual chapter 11) */
typedef struct {
S3C24X0_REG32 ULCON;
S3C24X0_REG32 UCON;
S3C24X0_REG32 UFCON;
S3C24X0_REG32 UMCON;
S3C24X0_REG32 UTRSTAT;
S3C24X0_REG32 UERSTAT;
S3C24X0_REG32 UFSTAT;
S3C24X0_REG32 UMSTAT;
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res1[3];
S3C24X0_REG8 UTXH;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 URXH;
#else /* Little Endian */
S3C24X0_REG8 UTXH;
S3C24X0_REG8 res1[3];
S3C24X0_REG8 URXH;
S3C24X0_REG8 res2[3];
#endif
S3C24X0_REG32 UBRDIV;
} /*__attribute__((__packed__))*/ S3C24X0_UART; /* PWM TIMER (see manual chapter 10) */
typedef struct {
S3C24X0_REG32 TCNTB;
S3C24X0_REG32 TCMPB;
S3C24X0_REG32 TCNTO;
} /*__attribute__((__packed__))*/ S3C24X0_TIMER; typedef struct {
S3C24X0_REG32 TCFG0;
S3C24X0_REG32 TCFG1;
S3C24X0_REG32 TCON;
S3C24X0_TIMER ch[4];
S3C24X0_REG32 TCNTB4;
S3C24X0_REG32 TCNTO4;
} /*__attribute__((__packed__))*/ S3C24X0_TIMERS; /* USB DEVICE (see manual chapter 13) */
typedef struct {
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res[3];
S3C24X0_REG8 EP_FIFO_REG;
#else /* little endian */
S3C24X0_REG8 EP_FIFO_REG;
S3C24X0_REG8 res[3];
#endif
} /*__attribute__((__packed__))*/ S3C24X0_USB_DEV_FIFOS; typedef struct {
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res1[3];
S3C24X0_REG8 EP_DMA_CON;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 EP_DMA_UNIT;
S3C24X0_REG8 res3[3];
S3C24X0_REG8 EP_DMA_FIFO;
S3C24X0_REG8 res4[3];
S3C24X0_REG8 EP_DMA_TTC_L;
S3C24X0_REG8 res5[3];
S3C24X0_REG8 EP_DMA_TTC_M;
S3C24X0_REG8 res6[3];
S3C24X0_REG8 EP_DMA_TTC_H;
#else /* little endian */
S3C24X0_REG8 EP_DMA_CON;
S3C24X0_REG8 res1[3];
S3C24X0_REG8 EP_DMA_UNIT;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 EP_DMA_FIFO;
S3C24X0_REG8 res3[3];
S3C24X0_REG8 EP_DMA_TTC_L;
S3C24X0_REG8 res4[3];
S3C24X0_REG8 EP_DMA_TTC_M;
S3C24X0_REG8 res5[3];
S3C24X0_REG8 EP_DMA_TTC_H;
S3C24X0_REG8 res6[3];
#endif
} /*__attribute__((__packed__))*/ S3C24X0_USB_DEV_DMAS; typedef struct {
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res1[3];
S3C24X0_REG8 FUNC_ADDR_REG;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 PWR_REG;
S3C24X0_REG8 res3[3];
S3C24X0_REG8 EP_INT_REG;
S3C24X0_REG8 res4[15];
S3C24X0_REG8 USB_INT_REG;
S3C24X0_REG8 res5[3];
S3C24X0_REG8 EP_INT_EN_REG;
S3C24X0_REG8 res6[15];
S3C24X0_REG8 USB_INT_EN_REG;
S3C24X0_REG8 res7[3];
S3C24X0_REG8 FRAME_NUM1_REG;
S3C24X0_REG8 res8[3];
S3C24X0_REG8 FRAME_NUM2_REG;
S3C24X0_REG8 res9[3];
S3C24X0_REG8 INDEX_REG;
S3C24X0_REG8 res10[7];
S3C24X0_REG8 MAXP_REG;
S3C24X0_REG8 res11[3];
S3C24X0_REG8 EP0_CSR_IN_CSR1_REG;
S3C24X0_REG8 res12[3];
S3C24X0_REG8 IN_CSR2_REG;
S3C24X0_REG8 res13[7];
S3C24X0_REG8 OUT_CSR1_REG;
S3C24X0_REG8 res14[3];
S3C24X0_REG8 OUT_CSR2_REG;
S3C24X0_REG8 res15[3];
S3C24X0_REG8 OUT_FIFO_CNT1_REG;
S3C24X0_REG8 res16[3];
S3C24X0_REG8 OUT_FIFO_CNT2_REG;
#else /* little endian */
S3C24X0_REG8 FUNC_ADDR_REG;
S3C24X0_REG8 res1[3];
S3C24X0_REG8 PWR_REG;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 EP_INT_REG;
S3C24X0_REG8 res3[15];
S3C24X0_REG8 USB_INT_REG;
S3C24X0_REG8 res4[3];
S3C24X0_REG8 EP_INT_EN_REG;
S3C24X0_REG8 res5[15];
S3C24X0_REG8 USB_INT_EN_REG;
S3C24X0_REG8 res6[3];
S3C24X0_REG8 FRAME_NUM1_REG;
S3C24X0_REG8 res7[3];
S3C24X0_REG8 FRAME_NUM2_REG;
S3C24X0_REG8 res8[3];
S3C24X0_REG8 INDEX_REG;
S3C24X0_REG8 res9[7];
S3C24X0_REG8 MAXP_REG;
S3C24X0_REG8 res10[3];
S3C24X0_REG8 EP0_CSR_IN_CSR1_REG;
S3C24X0_REG8 res11[3];
S3C24X0_REG8 IN_CSR2_REG;
S3C24X0_REG8 res12[7];
S3C24X0_REG8 OUT_CSR1_REG;
S3C24X0_REG8 res13[3];
S3C24X0_REG8 OUT_CSR2_REG;
S3C24X0_REG8 res14[3];
S3C24X0_REG8 OUT_FIFO_CNT1_REG;
S3C24X0_REG8 res15[3];
S3C24X0_REG8 OUT_FIFO_CNT2_REG;
S3C24X0_REG8 res16[3];
#endif /* __BIG_ENDIAN */
S3C24X0_REG32 res17[8];
S3C24X0_USB_DEV_FIFOS fifo[5];
S3C24X0_REG32 res18[11];
S3C24X0_USB_DEV_DMAS ep1;
S3C24X0_USB_DEV_DMAS ep2;
S3C24X0_REG8 res19[16];
S3C24X0_USB_DEV_DMAS ep3;
S3C24X0_USB_DEV_DMAS ep4;
} /*__attribute__((__packed__))*/ S3C24X0_USB_DEVICE; /* WATCH DOG TIMER (see manual chapter 18) */
typedef struct {
S3C24X0_REG32 WTCON;
S3C24X0_REG32 WTDAT;
S3C24X0_REG32 WTCNT;
} /*__attribute__((__packed__))*/ S3C24X0_WATCHDOG; /* IIC (see manual chapter 20) */
typedef struct {
S3C24X0_REG32 IICCON;
S3C24X0_REG32 IICSTAT;
S3C24X0_REG32 IICADD;
S3C24X0_REG32 IICDS;
} /*__attribute__((__packed__))*/ S3C24X0_I2C; /* IIS (see manual chapter 21) */
typedef struct {
#ifdef __BIG_ENDIAN
S3C24X0_REG16 res1;
S3C24X0_REG16 IISCON;
S3C24X0_REG16 res2;
S3C24X0_REG16 IISMOD;
S3C24X0_REG16 res3;
S3C24X0_REG16 IISPSR;
S3C24X0_REG16 res4;
S3C24X0_REG16 IISFCON;
S3C24X0_REG16 res5;
S3C24X0_REG16 IISFIFO;
#else /* little endian */
S3C24X0_REG16 IISCON;
S3C24X0_REG16 res1;
S3C24X0_REG16 IISMOD;
S3C24X0_REG16 res2;
S3C24X0_REG16 IISPSR;
S3C24X0_REG16 res3;
S3C24X0_REG16 IISFCON;
S3C24X0_REG16 res4;
S3C24X0_REG16 IISFIFO;
S3C24X0_REG16 res5;
#endif
} /*__attribute__((__packed__))*/ S3C24X0_I2S; /* I/O PORT (see manual chapter 9) */
typedef struct {
#ifdef CONFIG_S3C2400
S3C24X0_REG32 PACON;
S3C24X0_REG32 PADAT; S3C24X0_REG32 PBCON;
S3C24X0_REG32 PBDAT;
S3C24X0_REG32 PBUP; S3C24X0_REG32 PCCON;
S3C24X0_REG32 PCDAT;
S3C24X0_REG32 PCUP; S3C24X0_REG32 PDCON;
S3C24X0_REG32 PDDAT;
S3C24X0_REG32 PDUP; S3C24X0_REG32 PECON;
S3C24X0_REG32 PEDAT;
S3C24X0_REG32 PEUP; S3C24X0_REG32 PFCON;
S3C24X0_REG32 PFDAT;
S3C24X0_REG32 PFUP; S3C24X0_REG32 PGCON;
S3C24X0_REG32 PGDAT;
S3C24X0_REG32 PGUP; S3C24X0_REG32 OPENCR; S3C24X0_REG32 MISCCR;
S3C24X0_REG32 EXTINT;
#endif
#ifdef CONFIG_S3C2410
S3C24X0_REG32 GPACON;
S3C24X0_REG32 GPADAT;
S3C24X0_REG32 res1[2];
S3C24X0_REG32 GPBCON;
S3C24X0_REG32 GPBDAT;
S3C24X0_REG32 GPBUP;
S3C24X0_REG32 res2;
S3C24X0_REG32 GPCCON;
S3C24X0_REG32 GPCDAT;
S3C24X0_REG32 GPCUP;
S3C24X0_REG32 res3;
S3C24X0_REG32 GPDCON;
S3C24X0_REG32 GPDDAT;
S3C24X0_REG32 GPDUP;
S3C24X0_REG32 res4;
S3C24X0_REG32 GPECON;
S3C24X0_REG32 GPEDAT;
S3C24X0_REG32 GPEUP;
S3C24X0_REG32 res5;
S3C24X0_REG32 GPFCON;
S3C24X0_REG32 GPFDAT;
S3C24X0_REG32 GPFUP;
S3C24X0_REG32 res6;
S3C24X0_REG32 GPGCON;
S3C24X0_REG32 GPGDAT;
S3C24X0_REG32 GPGUP;
S3C24X0_REG32 res7;
S3C24X0_REG32 GPHCON;
S3C24X0_REG32 GPHDAT;
S3C24X0_REG32 GPHUP;
S3C24X0_REG32 res8; S3C24X0_REG32 MISCCR;
S3C24X0_REG32 DCLKCON;
S3C24X0_REG32 EXTINT0;
S3C24X0_REG32 EXTINT1;
S3C24X0_REG32 EXTINT2;
S3C24X0_REG32 EINTFLT0;
S3C24X0_REG32 EINTFLT1;
S3C24X0_REG32 EINTFLT2;
S3C24X0_REG32 EINTFLT3;
S3C24X0_REG32 EINTMASK;
S3C24X0_REG32 EINTPEND;
S3C24X0_REG32 GSTATUS0;
S3C24X0_REG32 GSTATUS1;
S3C24X0_REG32 GSTATUS2;
S3C24X0_REG32 GSTATUS3;
S3C24X0_REG32 GSTATUS4; /* s3c2440 */
S3C24X0_REG32 res9[4];
S3C24X0_REG32 GPJCON;
S3C24X0_REG32 GPJDAT;
S3C24X0_REG32 GPJUP;
#endif
} /*__attribute__((__packed__))*/ S3C24X0_GPIO; /* RTC (see manual chapter 17) */
typedef struct {
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res1[67];
S3C24X0_REG8 RTCCON;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 TICNT;
S3C24X0_REG8 res3[11];
S3C24X0_REG8 RTCALM;
S3C24X0_REG8 res4[3];
S3C24X0_REG8 ALMSEC;
S3C24X0_REG8 res5[3];
S3C24X0_REG8 ALMMIN;
S3C24X0_REG8 res6[3];
S3C24X0_REG8 ALMHOUR;
S3C24X0_REG8 res7[3];
S3C24X0_REG8 ALMDATE;
S3C24X0_REG8 res8[3];
S3C24X0_REG8 ALMMON;
S3C24X0_REG8 res9[3];
S3C24X0_REG8 ALMYEAR;
S3C24X0_REG8 res10[3];
S3C24X0_REG8 RTCRST;
S3C24X0_REG8 res11[3];
S3C24X0_REG8 BCDSEC;
S3C24X0_REG8 res12[3];
S3C24X0_REG8 BCDMIN;
S3C24X0_REG8 res13[3];
S3C24X0_REG8 BCDHOUR;
S3C24X0_REG8 res14[3];
S3C24X0_REG8 BCDDATE;
S3C24X0_REG8 res15[3];
S3C24X0_REG8 BCDDAY;
S3C24X0_REG8 res16[3];
S3C24X0_REG8 BCDMON;
S3C24X0_REG8 res17[3];
S3C24X0_REG8 BCDYEAR;
#else /* little endian */
S3C24X0_REG8 res0[64];
S3C24X0_REG8 RTCCON;
S3C24X0_REG8 res1[3];
S3C24X0_REG8 TICNT;
S3C24X0_REG8 res2[11];
S3C24X0_REG8 RTCALM;
S3C24X0_REG8 res3[3];
S3C24X0_REG8 ALMSEC;
S3C24X0_REG8 res4[3];
S3C24X0_REG8 ALMMIN;
S3C24X0_REG8 res5[3];
S3C24X0_REG8 ALMHOUR;
S3C24X0_REG8 res6[3];
S3C24X0_REG8 ALMDATE;
S3C24X0_REG8 res7[3];
S3C24X0_REG8 ALMMON;
S3C24X0_REG8 res8[3];
S3C24X0_REG8 ALMYEAR;
S3C24X0_REG8 res9[3];
S3C24X0_REG8 RTCRST;
S3C24X0_REG8 res10[3];
S3C24X0_REG8 BCDSEC;
S3C24X0_REG8 res11[3];
S3C24X0_REG8 BCDMIN;
S3C24X0_REG8 res12[3];
S3C24X0_REG8 BCDHOUR;
S3C24X0_REG8 res13[3];
S3C24X0_REG8 BCDDATE;
S3C24X0_REG8 res14[3];
S3C24X0_REG8 BCDDAY;
S3C24X0_REG8 res15[3];
S3C24X0_REG8 BCDMON;
S3C24X0_REG8 res16[3];
S3C24X0_REG8 BCDYEAR;
S3C24X0_REG8 res17[3];
#endif
} /*__attribute__((__packed__))*/ S3C24X0_RTC; /* ADC (see manual chapter 16) */
typedef struct {
S3C24X0_REG32 ADCCON;
S3C24X0_REG32 ADCDAT;
} /*__attribute__((__packed__))*/ S3C2400_ADC; /* ADC (see manual chapter 16) */
typedef struct {
S3C24X0_REG32 ADCCON;
S3C24X0_REG32 ADCTSC;
S3C24X0_REG32 ADCDLY;
S3C24X0_REG32 ADCDAT0;
S3C24X0_REG32 ADCDAT1;
} /*__attribute__((__packed__))*/ S3C2410_ADC; /* SPI (see manual chapter 22) */
typedef struct {
S3C24X0_REG32 SPCON;
S3C24X0_REG32 SPSTA;
S3C24X0_REG32 SPPIN;
S3C24X0_REG32 SPPRE;
S3C24X0_REG32 SPTDAT;
S3C24X0_REG32 SPRDAT;
S3C24X0_REG32 res[2];
} __attribute__((__packed__)) S3C24X0_SPI_CHANNEL; typedef struct {
S3C24X0_SPI_CHANNEL ch[S3C24X0_SPI_CHANNELS];
} /*__attribute__((__packed__))*/ S3C24X0_SPI; /* MMC INTERFACE (see S3C2400 manual chapter 19) */
typedef struct {
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res1[3];
S3C24X0_REG8 MMCON;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 MMCRR;
S3C24X0_REG8 res3[3];
S3C24X0_REG8 MMFCON;
S3C24X0_REG8 res4[3];
S3C24X0_REG8 MMSTA;
S3C24X0_REG16 res5;
S3C24X0_REG16 MMFSTA;
S3C24X0_REG8 res6[3];
S3C24X0_REG8 MMPRE;
S3C24X0_REG16 res7;
S3C24X0_REG16 MMLEN;
S3C24X0_REG8 res8[3];
S3C24X0_REG8 MMCR7;
S3C24X0_REG32 MMRSP[4];
S3C24X0_REG8 res9[3];
S3C24X0_REG8 MMCMD0;
S3C24X0_REG32 MMCMD1;
S3C24X0_REG16 res10;
S3C24X0_REG16 MMCR16;
S3C24X0_REG8 res11[3];
S3C24X0_REG8 MMDAT;
#else
S3C24X0_REG8 MMCON;
S3C24X0_REG8 res1[3];
S3C24X0_REG8 MMCRR;
S3C24X0_REG8 res2[3];
S3C24X0_REG8 MMFCON;
S3C24X0_REG8 res3[3];
S3C24X0_REG8 MMSTA;
S3C24X0_REG8 res4[3];
S3C24X0_REG16 MMFSTA;
S3C24X0_REG16 res5;
S3C24X0_REG8 MMPRE;
S3C24X0_REG8 res6[3];
S3C24X0_REG16 MMLEN;
S3C24X0_REG16 res7;
S3C24X0_REG8 MMCR7;
S3C24X0_REG8 res8[3];
S3C24X0_REG32 MMRSP[4];
S3C24X0_REG8 MMCMD0;
S3C24X0_REG8 res9[3];
S3C24X0_REG32 MMCMD1;
S3C24X0_REG16 MMCR16;
S3C24X0_REG16 res10;
S3C24X0_REG8 MMDAT;
S3C24X0_REG8 res11[3];
#endif
} /*__attribute__((__packed__))*/ S3C2400_MMC; /* SD INTERFACE (see S3C2410 manual chapter 19) */
typedef struct {
S3C24X0_REG32 SDICON;
S3C24X0_REG32 SDIPRE;
S3C24X0_REG32 SDICARG;
S3C24X0_REG32 SDICCON;
S3C24X0_REG32 SDICSTA;
S3C24X0_REG32 SDIRSP0;
S3C24X0_REG32 SDIRSP1;
S3C24X0_REG32 SDIRSP2;
S3C24X0_REG32 SDIRSP3;
S3C24X0_REG32 SDIDTIMER;
S3C24X0_REG32 SDIBSIZE;
S3C24X0_REG32 SDIDCON;
S3C24X0_REG32 SDIDCNT;
S3C24X0_REG32 SDIDSTA;
S3C24X0_REG32 SDIFSTA;
#ifdef __BIG_ENDIAN
S3C24X0_REG8 res[3];
S3C24X0_REG8 SDIDAT;
#else
S3C24X0_REG8 SDIDAT;
S3C24X0_REG8 res[3];
#endif
S3C24X0_REG32 SDIIMSK;
} /*__attribute__((__packed__))*/ S3C2410_SDI; #if 0
/* Memory control */
#define rBWSCON (*(volatile unsigned *)0x48000000)
#define rBANKCON0 (*(volatile unsigned *)0x48000004)
#define rBANKCON1 (*(volatile unsigned *)0x48000008)
#define rBANKCON2 (*(volatile unsigned *)0x4800000C)
#define rBANKCON3 (*(volatile unsigned *)0x48000010)
#define rBANKCON4 (*(volatile unsigned *)0x48000014)
#define rBANKCON5 (*(volatile unsigned *)0x48000018)
#define rBANKCON6 (*(volatile unsigned *)0x4800001C)
#define rBANKCON7 (*(volatile unsigned *)0x48000020)
#define rREFRESH (*(volatile unsigned *)0x48000024)
#define rBANKSIZE (*(volatile unsigned *)0x48000028)
#define rMRSRB6 (*(volatile unsigned *)0x4800002C)
#define rMRSRB7 (*(volatile unsigned *)0x48000030) /* USB HOST */
#define rHcRevision (*(volatile unsigned *)0x49000000)
#define rHcControl (*(volatile unsigned *)0x49000004)
#define rHcCommonStatus (*(volatile unsigned *)0x49000008)
#define rHcInterruptStatus (*(volatile unsigned *)0x4900000C)
#define rHcInterruptEnable (*(volatile unsigned *)0x49000010)
#define rHcInterruptDisable (*(volatile unsigned *)0x49000014)
#define rHcHCCA (*(volatile unsigned *)0x49000018)
#define rHcPeriodCuttendED (*(volatile unsigned *)0x4900001C)
#define rHcControlHeadED (*(volatile unsigned *)0x49000020)
#define rHcControlCurrentED (*(volatile unsigned *)0x49000024)
#define rHcBulkHeadED (*(volatile unsigned *)0x49000028)
#define rHcBuldCurrentED (*(volatile unsigned *)0x4900002C)
#define rHcDoneHead (*(volatile unsigned *)0x49000030)
#define rHcRmInterval (*(volatile unsigned *)0x49000034)
#define rHcFmRemaining (*(volatile unsigned *)0x49000038)
#define rHcFmNumber (*(volatile unsigned *)0x4900003C)
#define rHcPeriodicStart (*(volatile unsigned *)0x49000040)
#define rHcLSThreshold (*(volatile unsigned *)0x49000044)
#define rHcRhDescriptorA (*(volatile unsigned *)0x49000048)
#define rHcRhDescriptorB (*(volatile unsigned *)0x4900004C)
#define rHcRhStatus (*(volatile unsigned *)0x49000050)
#define rHcRhPortStatus1 (*(volatile unsigned *)0x49000054)
#define rHcRhPortStatus2 (*(volatile unsigned *)0x49000058) /* INTERRUPT */
#define rSRCPND (*(volatile unsigned *)0x4A000000)
#define rINTMOD (*(volatile unsigned *)0x4A000004)
#define rINTMSK (*(volatile unsigned *)0x4A000008)
#define rPRIORITY (*(volatile unsigned *)0x4A00000C)
#define rINTPND (*(volatile unsigned *)0x4A000010)
#define rINTOFFSET (*(volatile unsigned *)0x4A000014)
#define rSUBSRCPND (*(volatile unsigned *)0x4A000018)
#define rINTSUBMSK (*(volatile unsigned *)0x4A00001C) /* DMA */
#define rDISRC0 (*(volatile unsigned *)0x4B000000)
#define rDISRCC0 (*(volatile unsigned *)0x4B000004)
#define rDIDST0 (*(volatile unsigned *)0x4B000008)
#define rDIDSTC0 (*(volatile unsigned *)0x4B00000C)
#define rDCON0 (*(volatile unsigned *)0x4B000010)
#define rDSTAT0 (*(volatile unsigned *)0x4B000014)
#define rDCSRC0 (*(volatile unsigned *)0x4B000018)
#define rDCDST0 (*(volatile unsigned *)0x4B00001C)
#define rDMASKTRIG0 (*(volatile unsigned *)0x4B000020)
#define rDISRC1 (*(volatile unsigned *)0x4B000040)
#define rDISRCC1 (*(volatile unsigned *)0x4B000044)
#define rDIDST1 (*(volatile unsigned *)0x4B000048)
#define rDIDSTC1 (*(volatile unsigned *)0x4B00004C)
#define rDCON1 (*(volatile unsigned *)0x4B000050)
#define rDSTAT1 (*(volatile unsigned *)0x4B000054)
#define rDCSRC1 (*(volatile unsigned *)0x4B000058)
#define rDCDST1 (*(volatile unsigned *)0x4B00005C)
#define rDMASKTRIG1 (*(volatile unsigned *)0x4B000060)
#define rDISRC2 (*(volatile unsigned *)0x4B000080)
#define rDISRCC2 (*(volatile unsigned *)0x4B000084)
#define rDIDST2 (*(volatile unsigned *)0x4B000088)
#define rDIDSTC2 (*(volatile unsigned *)0x4B00008C)
#define rDCON2 (*(volatile unsigned *)0x4B000090)
#define rDSTAT2 (*(volatile unsigned *)0x4B000094)
#define rDCSRC2 (*(volatile unsigned *)0x4B000098)
#define rDCDST2 (*(volatile unsigned *)0x4B00009C)
#define rDMASKTRIG2 (*(volatile unsigned *)0x4B0000A0)
#define rDISRC3 (*(volatile unsigned *)0x4B0000C0)
#define rDISRCC3 (*(volatile unsigned *)0x4B0000C4)
#define rDIDST3 (*(volatile unsigned *)0x4B0000C8)
#define rDIDSTC3 (*(volatile unsigned *)0x4B0000CC)
#define rDCON3 (*(volatile unsigned *)0x4B0000D0)
#define rDSTAT3 (*(volatile unsigned *)0x4B0000D4)
#define rDCSRC3 (*(volatile unsigned *)0x4B0000D8)
#define rDCDST3 (*(volatile unsigned *)0x4B0000DC)
#define rDMASKTRIG3 (*(volatile unsigned *)0x4B0000E0) /* CLOCK & POWER MANAGEMENT */
#define rLOCKTIME (*(volatile unsigned *)0x4C000000)
#define rMPLLCON (*(volatile unsigned *)0x4C000004)
#define rUPLLCON (*(volatile unsigned *)0x4C000008)
#define rCLKCON (*(volatile unsigned *)0x4C00000C)
#define rCLKSLOW (*(volatile unsigned *)0x4C000010)
#define rCLKDIVN (*(volatile unsigned *)0x4C000014) /* LCD CONTROLLER */
#define rLCDCON1 (*(volatile unsigned *)0x4D000000)
#define rLCDCON2 (*(volatile unsigned *)0x4D000004)
#define rLCDCON3 (*(volatile unsigned *)0x4D000008)
#define rLCDCON4 (*(volatile unsigned *)0x4D00000C)
#define rLCDCON5 (*(volatile unsigned *)0x4D000010)
#define rLCDSADDR1 (*(volatile unsigned *)0x4D000014)
#define rLCDSADDR2 (*(volatile unsigned *)0x4D000018)
#define rLCDSADDR3 (*(volatile unsigned *)0x4D00001C)
#define rREDLUT (*(volatile unsigned *)0x4D000020)
#define rGREENLUT (*(volatile unsigned *)0x4D000024)
#define rBLUELUT (*(volatile unsigned *)0x4D000028)
#define rDITHMODE (*(volatile unsigned *)0x4D00004C)
#define rTPAL (*(volatile unsigned *)0x4D000050)
#define rLCDINTPND (*(volatile unsigned *)0x4D000054)
#define rLCDSRCPND (*(volatile unsigned *)0x4D000058)
#define rLCDINTMSK (*(volatile unsigned *)0x4D00005C) /* NAND FLASH */
#define rNFCONF (*(volatile unsigned *)0x4E000000)
#define rNFCMD (*(volatile unsigned *)0x4E000004)
#define rNFADDR (*(volatile unsigned *)0x4E000008)
#define rNFDATA (*(volatile unsigned *)0x4E00000C)
#define rNFSTAT (*(volatile unsigned *)0x4E000010)
#define rNFECC (*(volatile unsigned *)0x4E000014) /* UART */
#define rULCON0 (*(volatile unsigned *)0x50000000)
#define rUCON0 (*(volatile unsigned *)0x50000004)
#define rUFCON0 (*(volatile unsigned *)0x50000008)
#define rUMCON0 (*(volatile unsigned *)0x5000000C)
#define rUTRSTAT0 (*(volatile unsigned *)0x50000010)
#define rUERSTAT0 (*(volatile unsigned *)0x50000014)
#define rUFSTAT0 (*(volatile unsigned *)0x50000018)
#define rUMSTAT0 (*(volatile unsigned *)0x5000001C)
#define rUBRDIV0 (*(volatile unsigned *)0x50000028) #define rULCON1 (*(volatile unsigned *)0x50004000)
#define rUCON1 (*(volatile unsigned *)0x50004004)
#define rUFCON1 (*(volatile unsigned *)0x50004008)
#define rUMCON1 (*(volatile unsigned *)0x5000400C)
#define rUTRSTAT1 (*(volatile unsigned *)0x50004010)
#define rUERSTAT1 (*(volatile unsigned *)0x50004014)
#define rUFSTAT1 (*(volatile unsigned *)0x50004018)
#define rUMSTAT1 (*(volatile unsigned *)0x5000401C)
#define rUBRDIV1 (*(volatile unsigned *)0x50004028) #define rULCON2 (*(volatile unsigned *)0x50008000)
#define rUCON2 (*(volatile unsigned *)0x50008004)
#define rUFCON2 (*(volatile unsigned *)0x50008008)
#define rUTRSTAT2 (*(volatile unsigned *)0x50008010)
#define rUERSTAT2 (*(volatile unsigned *)0x50008014)
#define rUFSTAT2 (*(volatile unsigned *)0x50008018)
#define rUBRDIV2 (*(volatile unsigned *)0x50008028) #ifdef __BIG_ENDIAN
#define rUTXH0 (*(volatile unsigned char *)0x50000023)
#define rURXH0 (*(volatile unsigned char *)0x50000027)
#define rUTXH1 (*(volatile unsigned char *)0x50004023)
#define rURXH1 (*(volatile unsigned char *)0x50004027)
#define rUTXH2 (*(volatile unsigned char *)0x50008023)
#define rURXH2 (*(volatile unsigned char *)0x50008027) #define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000027)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004027)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008027) #define UTXH0 (0x50000020+3) /* byte_access address by DMA */
#define URXH0 (0x50000024+3)
#define UTXH1 (0x50004020+3)
#define URXH1 (0x50004024+3)
#define UTXH2 (0x50008020+3)
#define URXH2 (0x50008024+3) #else /* Little Endian */
#define rUTXH0 (*(volatile unsigned char *)0x50000020)
#define rURXH0 (*(volatile unsigned char *)0x50000024)
#define rUTXH1 (*(volatile unsigned char *)0x50004020)
#define rURXH1 (*(volatile unsigned char *)0x50004024)
#define rUTXH2 (*(volatile unsigned char *)0x50008020)
#define rURXH2 (*(volatile unsigned char *)0x50008024) #define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000024)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004024)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008024) #define UTXH0 (0x50000020) /* byte_access address by DMA */
#define URXH0 (0x50000024)
#define UTXH1 (0x50004020)
#define URXH1 (0x50004024)
#define UTXH2 (0x50008020)
#define URXH2 (0x50008024)
#endif /* PWM TIMER */
#define rTCFG0 (*(volatile unsigned *)0x51000000)
#define rTCFG1 (*(volatile unsigned *)0x51000004)
#define rTCON (*(volatile unsigned *)0x51000008)
#define rTCNTB0 (*(volatile unsigned *)0x5100000C)
#define rTCMPB0 (*(volatile unsigned *)0x51000010)
#define rTCNTO0 (*(volatile unsigned *)0x51000014)
#define rTCNTB1 (*(volatile unsigned *)0x51000018)
#define rTCMPB1 (*(volatile unsigned *)0x5100001C)
#define rTCNTO1 (*(volatile unsigned *)0x51000020)
#define rTCNTB2 (*(volatile unsigned *)0x51000024)
#define rTCMPB2 (*(volatile unsigned *)0x51000028)
#define rTCNTO2 (*(volatile unsigned *)0x5100002C)
#define rTCNTB3 (*(volatile unsigned *)0x51000030)
#define rTCMPB3 (*(volatile unsigned *)0x51000034)
#define rTCNTO3 (*(volatile unsigned *)0x51000038)
#define rTCNTB4 (*(volatile unsigned *)0x5100003C)
#define rTCNTO4 (*(volatile unsigned *)0x51000040) /* USB DEVICE */
#ifdef __BIG_ENDIAN
#define rFUNC_ADDR_REG (*(volatile unsigned char *)0x52000143)
#define rPWR_REG (*(volatile unsigned char *)0x52000147)
#define rEP_INT_REG (*(volatile unsigned char *)0x5200014B)
#define rUSB_INT_REG (*(volatile unsigned char *)0x5200015B)
#define rEP_INT_EN_REG (*(volatile unsigned char *)0x5200015F)
#define rUSB_INT_EN_REG (*(volatile unsigned char *)0x5200016F)
#define rFRAME_NUM1_REG (*(volatile unsigned char *)0x52000173)
#define rFRAME_NUM2_REG (*(volatile unsigned char *)0x52000177)
#define rINDEX_REG (*(volatile unsigned char *)0x5200017B)
#define rMAXP_REG (*(volatile unsigned char *)0x52000183)
#define rEP0_CSR (*(volatile unsigned char *)0x52000187)
#define rIN_CSR1_REG (*(volatile unsigned char *)0x52000187)
#define rIN_CSR2_REG (*(volatile unsigned char *)0x5200018B)
#define rOUT_CSR1_REG (*(volatile unsigned char *)0x52000193)
#define rOUT_CSR2_REG (*(volatile unsigned char *)0x52000197)
#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x5200019B)
#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019F)
#define rEP0_FIFO (*(volatile unsigned char *)0x520001C3)
#define rEP1_FIFO (*(volatile unsigned char *)0x520001C7)
#define rEP2_FIFO (*(volatile unsigned char *)0x520001CB)
#define rEP3_FIFO (*(volatile unsigned char *)0x520001CF)
#define rEP4_FIFO (*(volatile unsigned char *)0x520001D3)
#define rEP1_DMA_CON (*(volatile unsigned char *)0x52000203)
#define rEP1_DMA_UNIT (*(volatile unsigned char *)0x52000207)
#define rEP1_DMA_FIFO (*(volatile unsigned char *)0x5200020B)
#define rEP1_DMA_TX_LO (*(volatile unsigned char *)0x5200020F)
#define rEP1_DMA_TX_MD (*(volatile unsigned char *)0x52000213)
#define rEP1_DMA_TX_HI (*(volatile unsigned char *)0x52000217)
#define rEP2_DMA_CON (*(volatile unsigned char *)0x5200021B)
#define rEP2_DMA_UNIT (*(volatile unsigned char *)0x5200021F)
#define rEP2_DMA_FIFO (*(volatile unsigned char *)0x52000223)
#define rEP2_DMA_TX_LO (*(volatile unsigned char *)0x52000227)
#define rEP2_DMA_TX_MD (*(volatile unsigned char *)0x5200022B)
#define rEP2_DMA_TX_HI (*(volatile unsigned char *)0x5200022F)
#define rEP3_DMA_CON (*(volatile unsigned char *)0x52000243)
#define rEP3_DMA_UNIT (*(volatile unsigned char *)0x52000247)
#define rEP3_DMA_FIFO (*(volatile unsigned char *)0x5200024B)
#define rEP3_DMA_TX_LO (*(volatile unsigned char *)0x5200024F)
#define rEP3_DMA_TX_MD (*(volatile unsigned char *)0x52000253)
#define rEP3_DMA_TX_HI (*(volatile unsigned char *)0x52000257)
#define rEP4_DMA_CON (*(volatile unsigned char *)0x5200025B)
#define rEP4_DMA_UNIT (*(volatile unsigned char *)0x5200025F)
#define rEP4_DMA_FIFO (*(volatile unsigned char *)0x52000263)
#define rEP4_DMA_TX_LO (*(volatile unsigned char *)0x52000267)
#define rEP4_DMA_TX_MD (*(volatile unsigned char *)0x5200026B)
#define rEP4_DMA_TX_HI (*(volatile unsigned char *)0x5200026F)
#else /* little endian */
#define rFUNC_ADDR_REG (*(volatile unsigned char *)0x52000140)
#define rPWR_REG (*(volatile unsigned char *)0x52000144)
#define rEP_INT_REG (*(volatile unsigned char *)0x52000148)
#define rUSB_INT_REG (*(volatile unsigned char *)0x52000158)
#define rEP_INT_EN_REG (*(volatile unsigned char *)0x5200015C)
#define rUSB_INT_EN_REG (*(volatile unsigned char *)0x5200016C)
#define rFRAME_NUM1_REG (*(volatile unsigned char *)0x52000170)
#define rFRAME_NUM2_REG (*(volatile unsigned char *)0x52000174)
#define rINDEX_REG (*(volatile unsigned char *)0x52000178)
#define rMAXP_REG (*(volatile unsigned char *)0x52000180)
#define rEP0_CSR (*(volatile unsigned char *)0x52000184)
#define rIN_CSR1_REG (*(volatile unsigned char *)0x52000184)
#define rIN_CSR2_REG (*(volatile unsigned char *)0x52000188)
#define rOUT_CSR1_REG (*(volatile unsigned char *)0x52000190)
#define rOUT_CSR2_REG (*(volatile unsigned char *)0x52000194)
#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198)
#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019C)
#define rEP0_FIFO (*(volatile unsigned char *)0x520001C0)
#define rEP1_FIFO (*(volatile unsigned char *)0x520001C4)
#define rEP2_FIFO (*(volatile unsigned char *)0x520001C8)
#define rEP3_FIFO (*(volatile unsigned char *)0x520001CC)
#define rEP4_FIFO (*(volatile unsigned char *)0x520001D0)
#define rEP1_DMA_CON (*(volatile unsigned char *)0x52000200)
#define rEP1_DMA_UNIT (*(volatile unsigned char *)0x52000204)
#define rEP1_DMA_FIFO (*(volatile unsigned char *)0x52000208)
#define rEP1_DMA_TX_LO (*(volatile unsigned char *)0x5200020C)
#define rEP1_DMA_TX_MD (*(volatile unsigned char *)0x52000210)
#define rEP1_DMA_TX_HI (*(volatile unsigned char *)0x52000214)
#define rEP2_DMA_CON (*(volatile unsigned char *)0x52000218)
#define rEP2_DMA_UNIT (*(volatile unsigned char *)0x5200021C)
#define rEP2_DMA_FIFO (*(volatile unsigned char *)0x52000220)
#define rEP2_DMA_TX_LO (*(volatile unsigned char *)0x52000224)
#define rEP2_DMA_TX_MD (*(volatile unsigned char *)0x52000228)
#define rEP2_DMA_TX_HI (*(volatile unsigned char *)0x5200022C)
#define rEP3_DMA_CON (*(volatile unsigned char *)0x52000240)
#define rEP3_DMA_UNIT (*(volatile unsigned char *)0x52000244)
#define rEP3_DMA_FIFO (*(volatile unsigned char *)0x52000248)
#define rEP3_DMA_TX_LO (*(volatile unsigned char *)0x5200024C)
#define rEP3_DMA_TX_MD (*(volatile unsigned char *)0x52000250)
#define rEP3_DMA_TX_HI (*(volatile unsigned char *)0x52000254)
#define rEP4_DMA_CON (*(volatile unsigned char *)0x52000258)
#define rEP4_DMA_UNIT (*(volatile unsigned char *)0x5200025C)
#define rEP4_DMA_FIFO (*(volatile unsigned char *)0x52000260)
#define rEP4_DMA_TX_LO (*(volatile unsigned char *)0x52000264)
#define rEP4_DMA_TX_MD (*(volatile unsigned char *)0x52000268)
#define rEP4_DMA_TX_HI (*(volatile unsigned char *)0x5200026C)
#endif /* __BIG_ENDIAN */ /* WATCH DOG TIMER */
#define rWTCON (*(volatile unsigned *)0x53000000)
#define rWTDAT (*(volatile unsigned *)0x53000004)
#define rWTCNT (*(volatile unsigned *)0x53000008) /* IIC */
#define rIICCON (*(volatile unsigned *)0x54000000)
#define rIICSTAT (*(volatile unsigned *)0x54000004)
#define rIICADD (*(volatile unsigned *)0x54000008)
#define rIICDS (*(volatile unsigned *)0x5400000C) /* IIS */
#define rIISCON (*(volatile unsigned *)0x55000000)
#define rIISMOD (*(volatile unsigned *)0x55000004)
#define rIISPSR (*(volatile unsigned *)0x55000008)
#define rIISFCON (*(volatile unsigned *)0x5500000C) #ifdef __BIG_ENDIAN
#define IISFIF ((volatile unsigned short *)0x55000012)
#else /* little endian */
#define IISFIF ((volatile unsigned short *)0x55000010)
#endif /* I/O PORT */
#define rGPACON (*(volatile unsigned *)0x56000000)
#define rGPADAT (*(volatile unsigned *)0x56000004) #define rGPBCON (*(volatile unsigned *)0x56000010)
#define rGPBDAT (*(volatile unsigned *)0x56000014)
#define rGPBUP (*(volatile unsigned *)0x56000018) #define rGPCCON (*(volatile unsigned *)0x56000020)
#define rGPCDAT (*(volatile unsigned *)0x56000024)
#define rGPCUP (*(volatile unsigned *)0x56000028) #define rGPDCON (*(volatile unsigned *)0x56000030)
#define rGPDDAT (*(volatile unsigned *)0x56000034)
#define rGPDUP (*(volatile unsigned *)0x56000038) #define rGPECON (*(volatile unsigned *)0x56000040)
#define rGPEDAT (*(volatile unsigned *)0x56000044)
#define rGPEUP (*(volatile unsigned *)0x56000048) #define rGPFCON (*(volatile unsigned *)0x56000050)
#define rGPFDAT (*(volatile unsigned *)0x56000054)
#define rGPFUP (*(volatile unsigned *)0x56000058) #define rGPGCON (*(volatile unsigned *)0x56000060)
#define rGPGDAT (*(volatile unsigned *)0x56000064)
#define rGPGUP (*(volatile unsigned *)0x56000068) #define rGPHCON (*(volatile unsigned *)0x56000070)
#define rGPHDAT (*(volatile unsigned *)0x56000074)
#define rGPHUP (*(volatile unsigned *)0x56000078) #define rMISCCR (*(volatile unsigned *)0x56000080)
#define rDCLKCON (*(volatile unsigned *)0x56000084)
#define rEXTINT0 (*(volatile unsigned *)0x56000088)
#define rEXTINT1 (*(volatile unsigned *)0x5600008C)
#define rEXTINT2 (*(volatile unsigned *)0x56000090)
#define rEINTFLT0 (*(volatile unsigned *)0x56000094)
#define rEINTFLT1 (*(volatile unsigned *)0x56000098)
#define rEINTFLT2 (*(volatile unsigned *)0x5600009C)
#define rEINTFLT3 (*(volatile unsigned *)0x560000A0)
#define rEINTMASK (*(volatile unsigned *)0x560000A4)
#define rEINTPEND (*(volatile unsigned *)0x560000A8)
#define rGSTATUS0 (*(volatile unsigned *)0x560000AC)
#define rGSTATUS1 (*(volatile unsigned *)0x560000B0) /* RTC */
#ifdef __BIG_ENDIAN
#define rRTCCON (*(volatile unsigned char *)0x57000043)
#define rTICNT (*(volatile unsigned char *)0x57000047)
#define rRTCALM (*(volatile unsigned char *)0x57000053)
#define rALMSEC (*(volatile unsigned char *)0x57000057)
#define rALMMIN (*(volatile unsigned char *)0x5700005B)
#define rALMHOUR (*(volatile unsigned char *)0x5700005F)
#define rALMDATE (*(volatile unsigned char *)0x57000063)
#define rALMMON (*(volatile unsigned char *)0x57000067)
#define rALMYEAR (*(volatile unsigned char *)0x5700006B)
#define rRTCRST (*(volatile unsigned char *)0x5700006F)
#define rBCDSEC (*(volatile unsigned char *)0x57000073)
#define rBCDMIN (*(volatile unsigned char *)0x57000077)
#define rBCDHOUR (*(volatile unsigned char *)0x5700007B)
#define rBCDDATE (*(volatile unsigned char *)0x5700007F)
#define rBCDDAY (*(volatile unsigned char *)0x57000083)
#define rBCDMON (*(volatile unsigned char *)0x57000087)
#define rBCDYEAR (*(volatile unsigned char *)0x5700008B)
#else /* little endian */
#define rRTCCON (*(volatile unsigned char *)0x57000040)
#define rTICNT (*(volatile unsigned char *)0x57000044)
#define rRTCALM (*(volatile unsigned char *)0x57000050)
#define rALMSEC (*(volatile unsigned char *)0x57000054)
#define rALMMIN (*(volatile unsigned char *)0x57000058)
#define rALMHOUR (*(volatile unsigned char *)0x5700005C)
#define rALMDATE (*(volatile unsigned char *)0x57000060)
#define rALMMON (*(volatile unsigned char *)0x57000064)
#define rALMYEAR (*(volatile unsigned char *)0x57000068)
#define rRTCRST (*(volatile unsigned char *)0x5700006C)
#define rBCDSEC (*(volatile unsigned char *)0x57000070)
#define rBCDMIN (*(volatile unsigned char *)0x57000074)
#define rBCDHOUR (*(volatile unsigned char *)0x57000078)
#define rBCDDATE (*(volatile unsigned char *)0x5700007C)
#define rBCDDAY (*(volatile unsigned char *)0x57000080)
#define rBCDMON (*(volatile unsigned char *)0x57000084)
#define rBCDYEAR (*(volatile unsigned char *)0x57000088)
#endif /* ADC */
#define rADCCON (*(volatile unsigned *)0x58000000)
#define rADCTSC (*(volatile unsigned *)0x58000004)
#define rADCDLY (*(volatile unsigned *)0x58000008)
#define rADCDAT0 (*(volatile unsigned *)0x5800000C)
#define rADCDAT1 (*(volatile unsigned *)0x58000010) /* SPI */
#define rSPCON0 (*(volatile unsigned *)0x59000000)
#define rSPSTA0 (*(volatile unsigned *)0x59000004)
#define rSPPIN0 (*(volatile unsigned *)0x59000008)
#define rSPPRE0 (*(volatile unsigned *)0x5900000C)
#define rSPTDAT0 (*(volatile unsigned *)0x59000010)
#define rSPRDAT0 (*(volatile unsigned *)0x59000014)
#define rSPCON1 (*(volatile unsigned *)0x59000020)
#define rSPSTA1 (*(volatile unsigned *)0x59000024)
#define rSPPIN1 (*(volatile unsigned *)0x59000028)
#define rSPPRE1 (*(volatile unsigned *)0x5900002C)
#define rSPTDAT1 (*(volatile unsigned *)0x59000030)
#define rSPRDAT1 (*(volatile unsigned *)0x59000034) /* SD INTERFACE */
#define rSDICON (*(volatile unsigned *)0x5A000000)
#define rSDIPRE (*(volatile unsigned *)0x5A000004)
#define rSDICmdArg (*(volatile unsigned *)0x5A000008)
#define rSDICmdCon (*(volatile unsigned *)0x5A00000C)
#define rSDICmdSta (*(volatile unsigned *)0x5A000010)
#define rSDIRSP0 (*(volatile unsigned *)0x5A000014)
#define rSDIRSP1 (*(volatile unsigned *)0x5A000018)
#define rSDIRSP2 (*(volatile unsigned *)0x5A00001C)
#define rSDIRSP3 (*(volatile unsigned *)0x5A000020)
#define rSDIDTimer (*(volatile unsigned *)0x5A000024)
#define rSDIBSize (*(volatile unsigned *)0x5A000028)
#define rSDIDatCon (*(volatile unsigned *)0x5A00002C)
#define rSDIDatCnt (*(volatile unsigned *)0x5A000030)
#define rSDIDatSta (*(volatile unsigned *)0x5A000034)
#define rSDIFSTA (*(volatile unsigned *)0x5A000038)
#ifdef __BIG_ENDIAN
#define rSDIDAT (*(volatile unsigned char *)0x5A00003F)
#else
#define rSDIDAT (*(volatile unsigned char *)0x5A00003C)
#endif
#define rSDIIntMsk (*(volatile unsigned *)0x5A000040) #endif #define rGSTATUS1 (*(volatile unsigned *)0x560000B0)
#define isS3C2410 ((rGSTATUS1 & 0xffff0000) == 0x32410000) #endif /*__S3C24X0_H__*/
5. 这个时候编译make 100ask24x0_config, make all之后, 出现
drivers/nand/libnand.a(nand.o)(.text+0x24): In function `nand_init':
/tmp/u-boot/drivers/nand/nand.c:50: undefined reference to `board_nand_init'
lib_arm/libarm.a(armlinux.o)(.text+0x350): In function `do_bootm_linux':
/tmp/u-boot/lib_arm/armlinux.c:264: undefined reference to `udc_disconnect'
相信是NandFlash的问题, 去patch文件里面找找看.
首先确定board/100ask24x0/100ask24x0.h中, 有相关的Nand支持
#define CONFIG_COMMANDS \
((CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
/* Start: by www.100ask.net */ \
CFG_CMD_PING | \
CFG_CMD_JFFS2 | \
CFG_CMD_NAND | \
/* End: by www.100ask.net */ \
/*CFG_CMD_EEPROM |*/ \
/*CFG_CMD_I2C |*/ \
/*CFG_CMD_USB |*/ \
CFG_CMD_REGINFO | \
CFG_CMD_DATE | \
CFG_CMD_ELF))
在cpu/arm920t/s3c24x0/Makefile中, 增加一个c文件的编译
COBJS = i2c.o interrupts.o serial.o speed.o \
usb_ohci.o nand_flash.o
所以随之在这个目录下, 新建nand_flash.c文件
/*
* Nand flash interface of s3c2410/s3c2440, by www.100ask.net
* Changed from drivers/mtd/nand/s3c2410.c of kernel 2.6.13
*/ #include <common.h> #if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
#include <s3c2410.h>
#include <nand.h> DECLARE_GLOBAL_DATA_PTR; #define S3C2410_NFSTAT_READY (1<<0)
#define S3C2410_NFCONF_nFCE (1<<11) #define S3C2440_NFSTAT_READY (1<<0)
#define S3C2440_NFCONT_nFCE (1<<1) /* select chip, for s3c2410 */
static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND(); if (chip == -1) {
s3c2410nand->NFCONF |= S3C2410_NFCONF_nFCE;
} else {
s3c2410nand->NFCONF &= ~S3C2410_NFCONF_nFCE;
}
} /* command and control functions, for s3c2410
*
* Note, these all use tglx's method of changing the IO_ADDR_W field
* to make the code simpler, and use the nand layer's code to issue the
* command and address sequences via the proper IO ports.
*
*/
static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
struct nand_chip *chip = mtd->priv; switch (cmd) {
case NAND_CTL_SETNCE:
case NAND_CTL_CLRNCE:
printf("%s: called for NCE\n", __FUNCTION__);
break; case NAND_CTL_SETCLE:
chip->IO_ADDR_W = (void *)&s3c2410nand->NFCMD;
break; case NAND_CTL_SETALE:
chip->IO_ADDR_W = (void *)&s3c2410nand->NFADDR;
break; /* NAND_CTL_CLRCLE: */
/* NAND_CTL_CLRALE: */
default:
chip->IO_ADDR_W = (void *)&s3c2410nand->NFDATA;
break;
}
} /* s3c2410_nand_devready()
*
* returns 0 if the nand is busy, 1 if it is ready
*/
static int s3c2410_nand_devready(struct mtd_info *mtd)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND(); return (s3c2410nand->NFSTAT & S3C2410_NFSTAT_READY);
} /* select chip, for s3c2440 */
static void s3c2440_nand_select_chip(struct mtd_info *mtd, int chip)
{
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (chip == -1) {
s3c2440nand->NFCONT |= S3C2440_NFCONT_nFCE;
} else {
s3c2440nand->NFCONT &= ~S3C2440_NFCONT_nFCE;
}
} /* command and control functions */
static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND();
struct nand_chip *chip = mtd->priv; switch (cmd) {
case NAND_CTL_SETNCE:
case NAND_CTL_CLRNCE:
printf("%s: called for NCE\n", __FUNCTION__);
break; case NAND_CTL_SETCLE:
chip->IO_ADDR_W = (void *)&s3c2440nand->NFCMD;
break; case NAND_CTL_SETALE:
chip->IO_ADDR_W = (void *)&s3c2440nand->NFADDR;
break; /* NAND_CTL_CLRCLE: */
/* NAND_CTL_CLRALE: */
default:
chip->IO_ADDR_W = (void *)&s3c2440nand->NFDATA;
break;
}
} /* s3c2440_nand_devready()
*
* returns 0 if the nand is busy, 1 if it is ready
*/
static int s3c2440_nand_devready(struct mtd_info *mtd)
{
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); return (s3c2440nand->NFSTAT & S3C2440_NFSTAT_READY);
} /*
* Nand flash hardware initialization:
* Set the timing, enable NAND flash controller
*/
static void s3c24x0_nand_inithw(void)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); #define TACLS 0
#define TWRPH0 4
#define TWRPH1 2 if (isS3C2410)
{
/* Enable NAND flash controller, Initialize ECC, enable chip select, Set flash memory timing */
s3c2410nand->NFCONF = (1<<15)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0);
}
else
{
/* Set flash memory timing */
s3c2440nand->NFCONF = (TACLS<<12)|(TWRPH0<<8)|(TWRPH1<<4);
/* Initialize ECC, enable chip select, NAND flash controller enable */
s3c2440nand->NFCONT = (1<<4)|(0<<1)|(1<<0);
}
} /*
* Called by drivers/nand/nand.c, initialize the interface of nand flash
*/
void board_nand_init(struct nand_chip *chip)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); s3c24x0_nand_inithw(); if (isS3C2410) {
chip->IO_ADDR_R = (void *)&s3c2410nand->NFDATA;
chip->IO_ADDR_W = (void *)&s3c2410nand->NFDATA;
chip->hwcontrol = s3c2410_nand_hwcontrol;
chip->dev_ready = s3c2410_nand_devready;
chip->select_chip = s3c2410_nand_select_chip;
chip->options = 0;
} else {
chip->IO_ADDR_R = (void *)&s3c2440nand->NFDATA;
chip->IO_ADDR_W = (void *)&s3c2440nand->NFDATA;
chip->hwcontrol = s3c2440_nand_hwcontrol;
chip->dev_ready = s3c2440_nand_devready;
chip->select_chip = s3c2440_nand_select_chip;
chip->options = 0;
} chip->eccmode = NAND_ECC_SOFT;
} #endif
还有一个nand_flash_legacy.c
/* add by www.100ask.net */
/*-----------------------------------------------------------------------
* NAND flash settings
*/
#include <common.h>
#include <s3c2410.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND) DECLARE_GLOBAL_DATA_PTR; /* only has two value: NFCE_LOW, NFCE_HIGH */
#define NFCE_STATE int void NF_Conf(u16 conf)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFCONF = conf;
else
s3c2440nand->NFCONF = conf;
} /* only for s3c2440 */
void NF_Cont(u16 cont)
{
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number != MACH_TYPE_SMDK2410)
s3c2440nand->NFCONT = cont;
} void NF_Cmd(u8 cmd)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFCMD = cmd;
else
s3c2440nand->NFCMD = cmd;
} void NF_CmdW(u8 cmd)
{
NF_Cmd(cmd);
udelay(1);
} void NF_Addr(u8 addr)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFADDR = addr;
else
s3c2440nand->NFADDR = addr;
udelay(15);
} void NF_SetCE(NFCE_STATE s)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); switch (s) {
case NFCE_LOW:
if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFCONF &= ~(1<<11);
else
s3c2440nand->NFCONT &= ~(1<<1);
break; case NFCE_HIGH:
if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFCONF |= (1<<11);
else
s3c2440nand->NFCONT |= (1<<1);
break;
}
} /* only for s3c2440 */
void NF_ClrRB(void)
{
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number != MACH_TYPE_SMDK2410)
{
s3c2440nand->NFSTAT |= (1<<2);
}
} void NF_WaitRB(void)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
{
while (!(s3c2410nand->NFSTAT & (1<<0)));
}
else
{
while (!(s3c2440nand->NFSTAT & (1<<0)));
s3c2440nand->NFSTAT |= (1<<2);
}
} void NF_Write(u8 data)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND();
volatile unsigned char *puc = (volatile unsigned char *)&s3c2440nand->NFDATA; if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFDATA = data;
else
*puc = data; /* s3c2440's NFDATA must be accessed by 'u8*', www.100ask.net */ } u8 NF_Read(void)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND();
volatile unsigned char *puc = (volatile unsigned char *)&s3c2440nand->NFDATA; if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
return(s3c2410nand->NFDATA);
else
return(*puc); /* s3c2440's NFDATA must be accessed by 'u8*', www.100ask.net */
} void NF_Init_ECC(void)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
s3c2410nand->NFCONF |= (1<<12);
else
{
s3c2440nand->NFCONT |= (1<<4); // Reset ECC
s3c2440nand->NFCONT &= ~(1<<5); // UnLock MECC
}
} u32 NF_Read_ECC(void)
{
S3C2410_NAND * const s3c2410nand = S3C2410_GetBase_NAND();
S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND(); if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
return(s3c2410nand->NFECC);
else
{
s3c2440nand->NFCONT |= (1<<5); // Lock MECC
return(s3c2440nand->NFMECC0); // Read MECC
}
} extern ulong
nand_probe(ulong physadr); static inline void NF_Reset(void)
{
int i; NF_Cont((1<<4)|(0<<1)|(1<<0)); /* only for s3c2440, Initialize ECC, enable chip select, NAND flash controller enable */
NF_SetCE(NFCE_LOW); /* enable chip select */
NF_ClrRB(); /* only for s3c2440 */
NF_Cmd(0xFF); /* reset command */
for(i = 0; i < 10; i++); /* tWB = 100ns. */
NF_WaitRB(); /* wait 200~500us; */
NF_SetCE(NFCE_HIGH);
} static inline void NF_Init(void)
{
#if 0 /* a little bit too optimistic */
#define TACLS 0
#define TWRPH0 3
#define TWRPH1 0
#else
#define TACLS 0
#define TWRPH0 4
#define TWRPH1 2
#endif /* Set flash memory timing */
if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
{
NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
/*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */
/* 1 1 1 1, 1 xxx, r xxx, r xxx */
/* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */
}
else
{
NF_Conf((3<<12)|(7<<8)|(7<<4));
} NF_Reset();
} void
nand_init(void)
{
S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); NF_Init();
#ifdef DEBUG
printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
#endif
printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
}
#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
接着编译, 出现
lib_arm/libarm.a(armlinux.o)(.text+0x350): In function `do_bootm_linux':
/tmp/u-boot/lib_arm/armlinux.c:264: undefined reference to `udc_disconnect'
ok, 按照patch文件的 线索, 直接在u-boot-1.1.6/lib_arm/armlinux.c中, 把usb的这个调用直接注释掉, 然后增加一些内容:
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/ #include <common.h>
#include <command.h>
#include <image.h>
#include <zlib.h>
#include <asm/byteorder.h>
#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif DECLARE_GLOBAL_DATA_PTR; /*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
defined (CONFIG_SERIAL_TAG) || \
defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_VFD) || \
defined (CONFIG_LCD)
static void setup_start_tag (bd_t *bd); # ifdef CONFIG_SETUP_MEMORY_TAGS
static void setup_memory_tags (bd_t *bd);
# endif
static void setup_commandline_tag (bd_t *bd, char *commandline); #if 0
static void setup_ramdisk_tag (bd_t *bd);
#endif
# ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag (bd_t *bd, ulong initrd_start,
ulong initrd_end);
# endif
static void setup_end_tag (bd_t *bd); # if defined (CONFIG_VFD) || defined (CONFIG_LCD)
static void setup_videolfb_tag (gd_t *gd);
# endif static struct tag *params;
#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ #ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
# define SHOW_BOOT_PROGRESS(arg)
#endif extern image_header_t header; /* from cmd_bootm.c */ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong *len_ptr, int verify)
{
ulong len = 0, checksum;
ulong initrd_start, initrd_end;
ulong data;
void (*theKernel)(int zero, int arch, uint params);
image_header_t *hdr = &header;
bd_t *bd = gd->bd; #ifdef CONFIG_CMDLINE_TAG
char *commandline = getenv ("bootargs");
#endif theKernel = (void (*)(int, int, uint))ntohl(hdr->ih_ep); /*
* Check if there is an initrd image
*/
if (argc >= 3) {
SHOW_BOOT_PROGRESS (9); addr = simple_strtoul (argv[2], NULL, 16); printf ("## Loading Ramdisk Image at %08lx ...\n", addr); /* Copy header so we can blank CRC field for re-calculation */
#ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash (addr)) {
read_dataflash (addr, sizeof (image_header_t),
(char *) &header);
} else
#endif
memcpy (&header, (char *) addr,
sizeof (image_header_t)); if (ntohl (hdr->ih_magic) != IH_MAGIC) {
printf ("Bad Magic Number\n");
SHOW_BOOT_PROGRESS (-10);
do_reset (cmdtp, flag, argc, argv);
} data = (ulong) & header;
len = sizeof (image_header_t); checksum = ntohl (hdr->ih_hcrc);
hdr->ih_hcrc = 0; if (crc32 (0, (unsigned char *) data, len) != checksum) {
printf ("Bad Header Checksum\n");
SHOW_BOOT_PROGRESS (-11);
do_reset (cmdtp, flag, argc, argv);
} SHOW_BOOT_PROGRESS (10); print_image_hdr (hdr); data = addr + sizeof (image_header_t);
len = ntohl (hdr->ih_size); #ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash (addr)) {
read_dataflash (data, len, (char *) CFG_LOAD_ADDR);
data = CFG_LOAD_ADDR;
}
#endif if (verify) {
ulong csum = 0; printf (" Verifying Checksum ... ");
csum = crc32 (0, (unsigned char *) data, len);
if (csum != ntohl (hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
SHOW_BOOT_PROGRESS (-12);
do_reset (cmdtp, flag, argc, argv);
}
printf ("OK\n");
} SHOW_BOOT_PROGRESS (11); if ((hdr->ih_os != IH_OS_LINUX) ||
(hdr->ih_arch != IH_CPU_ARM) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
printf ("No Linux ARM Ramdisk Image\n");
SHOW_BOOT_PROGRESS (-13);
do_reset (cmdtp, flag, argc, argv);
} #if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO)
/*
*we need to copy the ramdisk to SRAM to let Linux boot
*/
memmove ((void *) ntohl(hdr->ih_load), (uchar *)data, len);
data = ntohl(hdr->ih_load);
#endif /* CONFIG_B2 || CONFIG_EVB4510 */ /*
* Now check if we have a multifile image
*/
} else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) {
ulong tail = ntohl (len_ptr[0]) % 4;
int i; SHOW_BOOT_PROGRESS (13); /* skip kernel length and terminator */
data = (ulong) (&len_ptr[2]);
/* skip any additional image length fields */
for (i = 1; len_ptr[i]; ++i)
data += 4;
/* add kernel length, and align */
data += ntohl (len_ptr[0]);
if (tail) {
data += 4 - tail;
} len = ntohl (len_ptr[1]); } else {
/*
* no initrd image
*/
SHOW_BOOT_PROGRESS (14); len = data = 0;
} #ifdef DEBUG
if (!data) {
printf ("No initrd\n");
}
#endif if (data) {
initrd_start = data;
initrd_end = initrd_start + len;
} else {
initrd_start = 0;
initrd_end = 0;
} SHOW_BOOT_PROGRESS (15); debug ("## Transferring control to Linux (at address %08lx) ...\n",
(ulong) theKernel); #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
defined (CONFIG_SERIAL_TAG) || \
defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_LCD) || \
defined (CONFIG_VFD)
setup_start_tag (bd);
#ifdef CONFIG_SERIAL_TAG
setup_serial_tag (¶ms);
#endif
#ifdef CONFIG_REVISION_TAG
setup_revision_tag (¶ms);
#endif
#ifdef CONFIG_SETUP_MEMORY_TAGS
setup_memory_tags (bd);
#endif
#ifdef CONFIG_CMDLINE_TAG
setup_commandline_tag (bd, commandline);
#endif
#ifdef CONFIG_INITRD_TAG
if (initrd_start && initrd_end)
setup_initrd_tag (bd, initrd_start, initrd_end);
#endif
#if defined (CONFIG_VFD) || defined (CONFIG_LCD)
setup_videolfb_tag ((gd_t *) gd);
#endif
setup_end_tag (bd);
#endif /* we assume that the kernel is in place */
printf ("\nStarting kernel ...\n\n"); #ifdef CONFIG_USB_DEVICE
{
extern void udc_disconnect (void);
//udc_disconnect (); // cancled by www.100ask.net
}
#endif cleanup_before_linux (); theKernel (0, bd->bi_arch_number, bd->bi_boot_params);
} void do_bootm_rawLinux (ulong addr)
{
ulong len = 0, checksum;
ulong initrd_start, initrd_end;
ulong data;
void (*theKernel)(int zero, int arch, uint params);
image_header_t *hdr = &header;
bd_t *bd = gd->bd; #ifdef CONFIG_CMDLINE_TAG
char *commandline = getenv ("bootargs");
#endif theKernel = (void (*)(int, int, uint))addr; {
/*
* no initrd image
*/
SHOW_BOOT_PROGRESS (14); len = data = 0;
} {
initrd_start = 0;
initrd_end = 0;
} #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
defined (CONFIG_SERIAL_TAG) || \
defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_LCD) || \
defined (CONFIG_VFD)
setup_start_tag (bd);
#ifdef CONFIG_SERIAL_TAG
setup_serial_tag (¶ms);
#endif
#ifdef CONFIG_REVISION_TAG
setup_revision_tag (¶ms);
#endif
#ifdef CONFIG_SETUP_MEMORY_TAGS
setup_memory_tags (bd);
#endif
#ifdef CONFIG_CMDLINE_TAG
setup_commandline_tag (bd, commandline);
#endif
#ifdef CONFIG_INITRD_TAG
if (initrd_start && initrd_end)
setup_initrd_tag (bd, initrd_start, initrd_end);
#endif
#if defined (CONFIG_VFD) || defined (CONFIG_LCD)
setup_videolfb_tag ((gd_t *) gd);
#endif
setup_end_tag (bd);
#endif /* we assume that the kernel is in place */
printf ("\nStarting kernel ...\n\n"); #ifdef CONFIG_USB_DEVICE
{
extern void udc_disconnect (void);
//udc_disconnect (); // cancled by www.100ask.net
}
#endif cleanup_before_linux (); theKernel (0, bd->bi_arch_number, bd->bi_boot_params);
} #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
defined (CONFIG_SERIAL_TAG) || \
defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_LCD) || \
defined (CONFIG_VFD)
static void setup_start_tag (bd_t *bd)
{
params = (struct tag *) bd->bi_boot_params; params->hdr.tag = ATAG_CORE;
params->hdr.size = tag_size (tag_core); params->u.core.flags = 0;
params->u.core.pagesize = 0;
params->u.core.rootdev = 0; params = tag_next (params);
} #ifdef CONFIG_SETUP_MEMORY_TAGS
static void setup_memory_tags (bd_t *bd)
{
int i; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
params->hdr.tag = ATAG_MEM;
params->hdr.size = tag_size (tag_mem32); params->u.mem.start = bd->bi_dram[i].start;
params->u.mem.size = bd->bi_dram[i].size; params = tag_next (params);
}
}
#endif /* CONFIG_SETUP_MEMORY_TAGS */ static void setup_commandline_tag (bd_t *bd, char *commandline)
{
char *p; if (!commandline)
return; /* eat leading white space */
for (p = commandline; *p == ' '; p++); /* skip non-existent command lines so the kernel will still
* use its default command line.
*/
if (*p == '\0')
return; params->hdr.tag = ATAG_CMDLINE;
params->hdr.size =
(sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2; strcpy (params->u.cmdline.cmdline, p); params = tag_next (params);
} #ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
{
/* an ATAG_INITRD node tells the kernel where the compressed
* ramdisk can be found. ATAG_RDIMG is a better name, actually.
*/
params->hdr.tag = ATAG_INITRD2;
params->hdr.size = tag_size (tag_initrd); params->u.initrd.start = initrd_start;
params->u.initrd.size = initrd_end - initrd_start; params = tag_next (params);
}
#endif /* CONFIG_INITRD_TAG */ #if defined (CONFIG_VFD) || defined (CONFIG_LCD)
extern ulong calc_fbsize (void);
static void setup_videolfb_tag (gd_t *gd)
{
/* An ATAG_VIDEOLFB node tells the kernel where and how large
* the framebuffer for video was allocated (among other things).
* Note that a _physical_ address is passed !
*
* We only use it to pass the address and size, the other entries
* in the tag_videolfb are not of interest.
*/
params->hdr.tag = ATAG_VIDEOLFB;
params->hdr.size = tag_size (tag_videolfb); params->u.videolfb.lfb_base = (u32) gd->fb_base;
/* Fb size is calculated according to parameters for our panel
*/
params->u.videolfb.lfb_size = calc_fbsize(); params = tag_next (params);
}
#endif /* CONFIG_VFD || CONFIG_LCD */ #ifdef CONFIG_SERIAL_TAG
void setup_serial_tag (struct tag **tmp)
{
struct tag *params = *tmp;
struct tag_serialnr serialnr;
void get_board_serial(struct tag_serialnr *serialnr); get_board_serial(&serialnr);
params->hdr.tag = ATAG_SERIAL;
params->hdr.size = tag_size (tag_serialnr);
params->u.serialnr.low = serialnr.low;
params->u.serialnr.high= serialnr.high;
params = tag_next (params);
*tmp = params;
}
#endif #ifdef CONFIG_REVISION_TAG
void setup_revision_tag(struct tag **in_params)
{
u32 rev = 0;
u32 get_board_rev(void); rev = get_board_rev();
params->hdr.tag = ATAG_REVISION;
params->hdr.size = tag_size (tag_revision);
params->u.revision.rev = rev;
params = tag_next (params);
}
#endif /* CONFIG_REVISION_TAG */ static void setup_end_tag (bd_t *bd)
{
params->hdr.tag = ATAG_NONE;
params->hdr.size = 0;
} #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
再编译make all, 没毛病