iOS即时通讯之CocoaAsyncSocket源码解析一

时间:2022-03-14 10:12:45

申明:本文内容属于转载整理,原文连接

前言:

CocoaAsyncSocket是谷歌的开发者,基于BSD-Socket写的一个IM框架,它给Mac和iOS提供了易于使用的、强大的异步套接字库,向上封装出简单易用OC接口。省去了我们面Socket向Socket以及数据流Stream等繁琐复杂的编程。

本文为一个系列,旨在让大家了解CocoaAsyncSocket是如何基于底层进行封装、工作的。

注:文中涉及代码比较多,建议大家结合源码一起阅读比较容易能加深理解。这里有楼主标注好注释的源码,有需要的可以作为参照:CocoaAsyncSocket源码注释

如果对该框架用法不熟悉的话,可以参考楼主之前这篇文章:iOS即时通讯,从入门到“放弃”?,或者自行查阅。

首先我们来看看框架的结构图:

iOS即时通讯之CocoaAsyncSocket源码解析一

整个库就这么两个类,一个基于TCP,一个基于UDP。其中基于TCP的GCDAsyncSocket,大概8000多行代码。而GCDAsyncUdpSocket稍微少一点,也有5000多行。
所以单纯从代码量上来看,这个库还是做了很多事的。

顺便提一下,之前这个框架还有一个runloop版的,不过因为功能重叠和其它种种原因,后续版本便废弃了,现在仅有GCD版本。

本系列我们将重点来讲GCDAsyncSocket这个类。

 @implementation GCDAsyncSocket
{
//flags,当前正在做操作的标识符
uint32_t flags;
uint16_t config; //代理
__weak id<GCDAsyncSocketDelegate> delegate;
//代理回调的queue
dispatch_queue_t delegateQueue; //本地IPV4Socket
int socket4FD;
//本地IPV6Socket
int socket6FD;
//unix域的套接字
int socketUN;
//unix域 服务端 url
NSURL *socketUrl;
//状态Index
int stateIndex; //本机的IPV4地址
NSData * connectInterface4;
//本机的IPV6地址
NSData * connectInterface6;
//本机unix域地址
NSData * connectInterfaceUN; //这个类的对Socket的操作都在这个queue中,串行
dispatch_queue_t socketQueue; dispatch_source_t accept4Source;
dispatch_source_t accept6Source;
dispatch_source_t acceptUNSource; //连接timer,GCD定时器
dispatch_source_t connectTimer;
dispatch_source_t readSource;
dispatch_source_t writeSource;
dispatch_source_t readTimer;
dispatch_source_t writeTimer; //读写数据包数组 类似queue,最大限制为5个包
NSMutableArray *readQueue;
NSMutableArray *writeQueue; //当前正在读写数据包
GCDAsyncReadPacket *currentRead;
GCDAsyncWritePacket *currentWrite;
//当前socket未获取完的数据大小
unsigned long socketFDBytesAvailable; //全局公用的提前缓冲区
GCDAsyncSocketPreBuffer *preBuffer; #if TARGET_OS_IPHONE
CFStreamClientContext streamContext;
//读的数据流
CFReadStreamRef readStream;
//写的数据流
CFWriteStreamRef writeStream;
#endif
//SSL上下文,用来做SSL认证
SSLContextRef sslContext; //全局公用的SSL的提前缓冲区
GCDAsyncSocketPreBuffer *sslPreBuffer;
size_t sslWriteCachedLength; //记录SSL读取数据错误
OSStatus sslErrCode;
//记录SSL握手的错误
OSStatus lastSSLHandshakeError; //socket队列的标识key
void *IsOnSocketQueueOrTargetQueueKey; id userData; //连接备选服务端地址的延时 (另一个IPV4或IPV6)
NSTimeInterval alternateAddressDelay;
}

这个里定义了一些属性,可以先简单看看注释,这里我们仅仅先暂时列出来,给大家混个眼熟。
在接下来的代码中,会大量穿插着这些属性的使用。所以大家不用觉得困惑,具体作用,我们后面会一一讲清楚的。

接着我们来看看本文方法一--初始化方法:

 //层级调用
- (id)init
{
return [self initWithDelegate:nil delegateQueue:NULL socketQueue:NULL];
} - (id)initWithSocketQueue:(dispatch_queue_t)sq
{
return [self initWithDelegate:nil delegateQueue:NULL socketQueue:sq];
} - (id)initWithDelegate:(id)aDelegate delegateQueue:(dispatch_queue_t)dq
{
return [self initWithDelegate:aDelegate delegateQueue:dq socketQueue:NULL];
} - (id)initWithDelegate:(id)aDelegate delegateQueue:(dispatch_queue_t)dq socketQueue:(dispatch_queue_t)sq
{
if((self = [super init]))
{
delegate = aDelegate;
delegateQueue = dq; //这个宏是在sdk6.0之后才有的,如果是之前的,则OS_OBJECT_USE_OBJC为0,!0即执行if语句
//对6.0的适配,如果是6.0以下,则去retain release,6.0之后ARC也管理了GCD
#if !OS_OBJECT_USE_OBJC if (dq) dispatch_retain(dq);
#endif //创建socket,先都置为 -1
//本机的ipv4
socket4FD = SOCKET_NULL;
//ipv6
socket6FD = SOCKET_NULL;
//应该是UnixSocket
socketUN = SOCKET_NULL;
//url
socketUrl = nil;
//状态
stateIndex = ; if (sq)
{
//如果scoketQueue是global的,则报错。断言必须要一个非并行queue。
NSAssert(sq != dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_LOW, ),
@"The given socketQueue parameter must not be a concurrent queue.");
NSAssert(sq != dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_HIGH, ),
@"The given socketQueue parameter must not be a concurrent queue.");
NSAssert(sq != dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, ),
@"The given socketQueue parameter must not be a concurrent queue.");
//拿到scoketQueue
socketQueue = sq;
//iOS6之下retain
#if !OS_OBJECT_USE_OBJC
dispatch_retain(sq);
#endif
}
else
{
//没有的话创建一个, 名字为:GCDAsyncSocket,串行
socketQueue = dispatch_queue_create([GCDAsyncSocketQueueName UTF8String], NULL);
} // The dispatch_queue_set_specific() and dispatch_get_specific() functions take a "void *key" parameter.
// From the documentation:
//
// > Keys are only compared as pointers and are never dereferenced.
// > Thus, you can use a pointer to a static variable for a specific subsystem or
// > any other value that allows you to identify the value uniquely.
//
// We're just going to use the memory address of an ivar.
// Specifically an ivar that is explicitly named for our purpose to make the code more readable.
//
// However, it feels tedious (and less readable) to include the "&" all the time:
// dispatch_get_specific(&IsOnSocketQueueOrTargetQueueKey)
//
// So we're going to make it so it doesn't matter if we use the '&' or not,
// by assigning the value of the ivar to the address of the ivar.
// Thus: IsOnSocketQueueOrTargetQueueKey == &IsOnSocketQueueOrTargetQueueKey; //比如原来为 0X123 -> NULL 变成 0X222->0X123->NULL
//自己的指针等于自己原来的指针,成二级指针了 看了注释是为了以后省略&,让代码更可读?
IsOnSocketQueueOrTargetQueueKey = &IsOnSocketQueueOrTargetQueueKey; void *nonNullUnusedPointer = (__bridge void *)self; //dispatch_queue_set_specific给当前队里加一个标识 dispatch_get_specific当前线程取出这个标识,判断是不是在这个队列
//这个key的值其实就是一个一级指针的地址 ,第三个参数把自己传过去了,上下文对象?第4个参数,为销毁的时候用的,可以指定一个函数
dispatch_queue_set_specific(socketQueue, IsOnSocketQueueOrTargetQueueKey, nonNullUnusedPointer, NULL);
//读的数组 限制为5
readQueue = [[NSMutableArray alloc] initWithCapacity:];
currentRead = nil; //写的数组,限制5
writeQueue = [[NSMutableArray alloc] initWithCapacity:];
currentWrite = nil; //设置大小为 4kb
preBuffer = [[GCDAsyncSocketPreBuffer alloc] initWithCapacity:( * )]; #pragma mark alternateAddressDelay??
//交替地址延时?? wtf
alternateAddressDelay = 0.3;
}
return self;
}

详细的细节可以看看注释,这里初始化了一些属性:

1.代理、以及代理queue的赋值。

2.本机socket的初始化:包括下面3种

//本机的ipv4
socket4FD = SOCKET_NULL;
//ipv6
socket6FD = SOCKET_NULL;
//UnixSocket
socketUN = SOCKET_NULL;

其中值得一提的是第三种:UnixSocket,这个是用于Unix Domin Socket通信用的。
那么什么是Unix Domin Socket呢?
原来它是在socket的框架上发展出一种IPC(进程间通信)机制,虽然网络socket也可用于同一台主机的进程间通讯(通过loopback地址127.0.0.1),但是UNIX Domain Socket用于IPC 更有效率 :

  • 不需要经过网络协议栈
  • 不需要打包拆包、计算校验和、维护序号和应答等,只是将应用层数据从一个进程拷贝到另一个进程。这是因为,IPC机制本质上是可靠的通讯,而网络协议是为不可靠的通讯设计的。UNIX Domain Socket也提供面向流和面向数据包两种API接口,类似于TCP和UDP,但是面向消息的UNIX Domain Socket也是可靠的,消息既不会丢失也不会顺序错乱。

基本上它是当今应用于IPC最主流的方式。至于它到底和普通的socket通信实现起来有什么区别,别着急,我们接着往下看。

3.生成了一个socketQueue,这个queue是串行的,接下来我们看代码就会知道它贯穿于这个类的所有地方。所有对socket以及一些内部数据的相关操作,都需要在这个串行queue中进行。这样使得整个类没有加一个锁,就保证了整个类的线程安全。

4.创建了两个读写队列(本质数组),接下来我们所有的读写任务,都会先追加在这个队列最后,然后每次取出队列中最前面的任务,进行处理。

5.创建了一个全局的数据缓冲区:preBuffer,我们所操作的数据,大部分都是要先存入这个preBuffer中,然后再从preBuffer取出进行处理的。

6.初始化了一个交替延时变量:alternateAddressDelay,这个变量先简单的理解下:就是进行另一个服务端地址请求的延时。后面我们一讲到,大家就明白了。

初始化方法就到此为止了。

接着我们有socket了,我们如果是客户端,就需要去connet服务器。

又或者我们是服务端的话,就需要去bind端口,并且accept,等待客户端的连接。(基本上也没有用iOS来做服务端的吧...)

这里我们先作为客户端来看看connect: iOS即时通讯之CocoaAsyncSocket源码解析一

其中和connect相关的方法就这么多,我们一般这么来连接到服务端:

[socket connectToHost:Khost onPort:Kport error:nil];

也就是我们在截图中选中的方法,那我们就从这个方法作为起点,开始讲起吧。

本文方法二--connect总方法

 /逐级调用
- (BOOL)connectToHost:(NSString*)host onPort:(uint16_t)port error:(NSError **)errPtr
{
return [self connectToHost:host onPort:port withTimeout:- error:errPtr];
} - (BOOL)connectToHost:(NSString *)host
onPort:(uint16_t)port
withTimeout:(NSTimeInterval)timeout
error:(NSError **)errPtr
{
return [self connectToHost:host onPort:port viaInterface:nil withTimeout:timeout error:errPtr];
} //多一个inInterface,本机地址
- (BOOL)connectToHost:(NSString *)inHost
onPort:(uint16_t)port
viaInterface:(NSString *)inInterface
withTimeout:(NSTimeInterval)timeout
error:(NSError **)errPtr
{
//{} 跟踪当前行为
LogTrace(); // Just in case immutable objects were passed
//拿到host ,copy防止值被修改
NSString *host = [inHost copy];
//interface?接口?
NSString *interface = [inInterface copy]; //声明两个__block的
__block BOOL result = NO;
//error信息
__block NSError *preConnectErr = nil; //gcdBlock ,都包裹在自动释放池中
dispatch_block_t block = ^{ @autoreleasepool { // Check for problems with host parameter if ([host length] == )
{
NSString *msg = @"Invalid host parameter (nil or \"\"). Should be a domain name or IP address string.";
preConnectErr = [self badParamError:msg]; //其实就是return,大牛的代码真是充满逼格
return_from_block;
} // Run through standard pre-connect checks
//一个前置的检查,如果没通过返回,这个检查里,如果interface有值,则会将本机的IPV4 IPV6的 address设置上。
if (![self preConnectWithInterface:interface error:&preConnectErr])
{
return_from_block;
} // We've made it past all the checks.
// It's time to start the connection process.
//flags 做或等运算。 flags标识为开始Socket连接
flags |= kSocketStarted; //又是一个{}? 只是为了标记么?
LogVerbose(@"Dispatching DNS lookup..."); // It's possible that the given host parameter is actually a NSMutableString.
//很可能给我们的服务端的参数是一个可变字符串
// So we want to copy it now, within this block that will be executed synchronously.
//所以我们需要copy,在Block里同步的执行
// This way the asynchronous lookup block below doesn't have to worry about it changing.
//这种基于Block的异步查找,不需要担心它被改变 //copy,防止改变
NSString *hostCpy = [host copy]; //拿到状态
int aStateIndex = stateIndex;
__weak GCDAsyncSocket *weakSelf = self; //全局Queue
dispatch_queue_t globalConcurrentQueue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, );
//异步执行
dispatch_async(globalConcurrentQueue, ^{ @autoreleasepool {
//忽视循环引用
#pragma clang diagnostic push
#pragma clang diagnostic warning "-Wimplicit-retain-self" //查找错误
NSError *lookupErr = nil;
//server地址数组(包含IPV4 IPV6的地址 sockaddr_in6、sockaddr_in类型)
NSMutableArray *addresses = [[self class] lookupHost:hostCpy port:port error:&lookupErr]; //strongSelf
__strong GCDAsyncSocket *strongSelf = weakSelf; //完整Block安全形态,在加个if
if (strongSelf == nil) return_from_block; //如果有错
if (lookupErr)
{
//用cocketQueue
dispatch_async(strongSelf->socketQueue, ^{ @autoreleasepool {
//一些错误处理,清空一些数据等等
[strongSelf lookup:aStateIndex didFail:lookupErr];
}});
}
//正常
else
{ NSData *address4 = nil;
NSData *address6 = nil;
//遍历地址数组
for (NSData *address in addresses)
{
//判断address4不为空,且address为IPV4
if (!address4 && [[self class] isIPv4Address:address])
{
address4 = address;
}
//判断address6不为空,且address为IPV6
else if (!address6 && [[self class] isIPv6Address:address])
{
address6 = address;
}
}
//异步去发起连接
dispatch_async(strongSelf->socketQueue, ^{ @autoreleasepool { [strongSelf lookup:aStateIndex didSucceedWithAddress4:address4 address6:address6];
}});
} #pragma clang diagnostic pop
}}); //开启连接超时
[self startConnectTimeout:timeout]; result = YES;
}};
//在socketQueue中执行这个Block
if (dispatch_get_specific(IsOnSocketQueueOrTargetQueueKey))
block();
//否则同步的调起这个queue去执行
else
dispatch_sync(socketQueue, block); //如果有错误,赋值错误
if (errPtr) *errPtr = preConnectErr;
//把连接是否成功的result返回
return result;
}

这个方法非常长,它主要做了以下几件事:

  • 首先我们需要说一下的是,整个类大量的会出现LogTrace()类似这样的宏,我们点进去发现它的本质只是一个{},什么事都没做。

    原来这些宏是为了追踪当前执行的流程用的,它被定义在一个大的#if #else中:

#ifndef GCDAsyncSocketLoggingEnabled
#define GCDAsyncSocketLoggingEnabled 0
#endif
#if GCDAsyncSocketLoggingEnabled
// Logging Enabled - See log level below
// Logging uses the CocoaLumberjack framework (which is also GCD based).
// https://github.com/robbiehanson/CocoaLumberjack
//
// It allows us to do a lot of logging without significantly slowing down the code.
#import "DDLog.h"
#define LogAsync YES
#define LogContext GCDAsyncSocketLoggingContext
#define LogObjc(flg, frmt, ...) LOG_OBJC_MAYBE(LogAsync, logLevel, flg, LogContext, frmt, ##__VA_ARGS__)
#define LogC(flg, frmt, ...) LOG_C_MAYBE(LogAsync, logLevel, flg, LogContext, frmt, ##__VA_ARGS__)
#define LogError(frmt, ...) LogObjc(LOG_FLAG_ERROR, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogWarn(frmt, ...) LogObjc(LOG_FLAG_WARN, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogInfo(frmt, ...) LogObjc(LOG_FLAG_INFO, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogVerbose(frmt, ...) LogObjc(LOG_FLAG_VERBOSE, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogCError(frmt, ...) LogC(LOG_FLAG_ERROR, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogCWarn(frmt, ...) LogC(LOG_FLAG_WARN, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogCInfo(frmt, ...) LogC(LOG_FLAG_INFO, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogCVerbose(frmt, ...) LogC(LOG_FLAG_VERBOSE, (@"%@: " frmt), THIS_FILE, ##__VA_ARGS__)
#define LogTrace() LogObjc(LOG_FLAG_VERBOSE, @"%@: %@", THIS_FILE, THIS_METHOD)
#define LogCTrace() LogC(LOG_FLAG_VERBOSE, @"%@: %s", THIS_FILE, __FUNCTION__)
#ifndef GCDAsyncSocketLogLevel
#define GCDAsyncSocketLogLevel LOG_LEVEL_VERBOSE
#endif
// Log levels : off, error, warn, info, verbose
static const int logLevel = GCDAsyncSocketLogLevel;
#else
// Logging Disabled
#define LogError(frmt, ...) {}
#define LogWarn(frmt, ...) {}
#define LogInfo(frmt, ...) {}
#define LogVerbose(frmt, ...) {}
#define LogCError(frmt, ...) {}
#define LogCWarn(frmt, ...) {}
#define LogCInfo(frmt, ...) {}
#define LogCVerbose(frmt, ...) {}
#define LogTrace() {}
#define LogCTrace(frmt, ...) {}
#endif

而此时因为GCDAsyncSocketLoggingEnabled默认为0,所以仅仅是一个{}。当标记为1时,这些宏就可以用来输出我们当前的业务流程,极大的方便了我们的调试过程。

  • 接着我们回到正题上,我们定义了一个Block,所有的连接操作都被包裹在这个Block中。我们做了如下判断:
  //在socketQueue中执行这个Block
if (dispatch_get_specific(IsOnSocketQueueOrTargetQueueKey))
block();
//否则同步的调起这个queue去执行
else
dispatch_sync(socketQueue, block);

保证这个连接操作一定是在我们的socketQueue中,而且还是以串行同步的形式去执行,规避了线程安全的问题。

  • 接着把Block中连接过程产生的错误进行赋值,并且把连接的结果返回出去

//如果有错误,赋值错误
if (errPtr) *errPtr = preConnectErr;
//把连接是否成功的result返回
return result;

接着来看这个方法声明的Block内部,也就是进行连接的真正主题操作,这个连接过程将会调用许多函数,一环扣一环,我会尽可能用最清晰、详尽的语言来描述...

1.这个Block首先做了一些错误的判断,并调用了一些错误生成的方法。类似:

 if ([host length] == )
{
NSString *msg = @"Invalid host parameter (nil or \"\"). Should be a domain name or IP address string.";
preConnectErr = [self badParamError:msg]; //其实就是return,大牛的代码真是充满逼格
return_from_block;
}
//用该字符串生成一个错误,错误的域名,错误的参数
- (NSError *)badParamError:(NSString *)errMsg
{
NSDictionary *userInfo = [NSDictionary dictionaryWithObject:errMsg forKey:NSLocalizedDescriptionKey]; return [NSError errorWithDomain:GCDAsyncSocketErrorDomain code:GCDAsyncSocketBadParamError userInfo:userInfo];
}

2.接着做了一个前置的错误检查:

if (![self preConnectWithInterface:interface error:&preConnectErr])
{
return_from_block;
}

这个检查方法,如果没通过返回NO。并且如果interface有值,则会将本机的IPV4 IPV6的 address设置上。即我们之前提到的这两个属性:

//本机的IPV4地址
NSData * connectInterface4;
//本机的IPV6地址
NSData * connectInterface6;

我们来看看这个前置检查方法:

本文方法三--前置检查方法

 //在连接之前的接口检查,一般我们传nil  interface本机的IP 端口等等
- (BOOL)preConnectWithInterface:(NSString *)interface error:(NSError **)errPtr
{
//先断言,如果当前的queue不是初始化quueue,直接报错
NSAssert(dispatch_get_specific(IsOnSocketQueueOrTargetQueueKey), @"Must be dispatched on socketQueue"); //无代理
if (delegate == nil) // Must have delegate set
{
if (errPtr)
{
NSString *msg = @"Attempting to connect without a delegate. Set a delegate first.";
*errPtr = [self badConfigError:msg];
}
return NO;
}
//没有代理queue
if (delegateQueue == NULL) // Must have delegate queue set
{
if (errPtr)
{
NSString *msg = @"Attempting to connect without a delegate queue. Set a delegate queue first.";
*errPtr = [self badConfigError:msg];
}
return NO;
} //当前不是非连接状态
if (![self isDisconnected]) // Must be disconnected
{
if (errPtr)
{
NSString *msg = @"Attempting to connect while connected or accepting connections. Disconnect first.";
*errPtr = [self badConfigError:msg];
}
return NO;
} //判断是否支持IPV4 IPV6 &位与运算,因为枚举是用 左位移<<运算定义的,所以可以用来判断 config包不包含某个枚举。因为一个值可能包含好几个枚举值,所以这时候不能用==来判断,只能用&来判断
BOOL isIPv4Disabled = (config & kIPv4Disabled) ? YES : NO;
BOOL isIPv6Disabled = (config & kIPv6Disabled) ? YES : NO; //是否都不支持
if (isIPv4Disabled && isIPv6Disabled) // Must have IPv4 or IPv6 enabled
{
if (errPtr)
{
NSString *msg = @"Both IPv4 and IPv6 have been disabled. Must enable at least one protocol first.";
*errPtr = [self badConfigError:msg];
}
return NO;
} //如果有interface,本机地址
if (interface)
{
NSMutableData *interface4 = nil;
NSMutableData *interface6 = nil; //得到本机的IPV4 IPV6地址
[self getInterfaceAddress4:&interface4 address6:&interface6 fromDescription:interface port:]; //如果两者都为nil
if ((interface4 == nil) && (interface6 == nil))
{
if (errPtr)
{
NSString *msg = @"Unknown interface. Specify valid interface by name (e.g. \"en1\") or IP address.";
*errPtr = [self badParamError:msg];
}
return NO;
} if (isIPv4Disabled && (interface6 == nil))
{
if (errPtr)
{
NSString *msg = @"IPv4 has been disabled and specified interface doesn't support IPv6.";
*errPtr = [self badParamError:msg];
}
return NO;
} if (isIPv6Disabled && (interface4 == nil))
{
if (errPtr)
{
NSString *msg = @"IPv6 has been disabled and specified interface doesn't support IPv4.";
*errPtr = [self badParamError:msg];
}
return NO;
}
//如果都没问题,则赋值
connectInterface4 = interface4;
connectInterface6 = interface6;
} // Clear queues (spurious read/write requests post disconnect)
//清除queue(假的读写请求 ,提交断开连接)
//读写Queue清除
[readQueue removeAllObjects];
[writeQueue removeAllObjects]; return YES;
}

又是非常长的一个方法,但是这个方法还是非常好读的。

  • 主要是对连接前的一个属性参数的判断,如果不齐全的话,则填充错误指针,并且返回NO。
  • 在这里如果我们interface这个参数不为空话,我们会额外多执行一些操作。
    首先来讲讲这个参数是什么,简单来讲,这个就是我们设置的本机IP+端口号。照理来说我们是不需要去设置这个参数的,默认的为localhost(127.0.0.1)本机地址。而端口号会在本机中取一个空闲可用的端口。
    而我们一旦设置了这个参数,就会强制本地IP和端口为我们指定的。其实这样设置反而不好,其实大家也能想明白,这里端口号如果我们写死,万一被其他进程给占用了。那么肯定是无法连接成功的。
    所以就有了我们做IM的时候,一般是不会去指定客户端bind某一个端口。而是用系统自动去选择。

  • 我们最后清空了当前读写queue中,所有的任务。

至于有interface,我们所做的额外操作是什么呢,我们接下来看看这个方法:

本文方法四--本地地址绑定方法

 - (void)getInterfaceAddress4:(NSMutableData **)interfaceAddr4Ptr
address6:(NSMutableData **)interfaceAddr6Ptr
fromDescription:(NSString *)interfaceDescription
port:(uint16_t)port
{
NSMutableData *addr4 = nil;
NSMutableData *addr6 = nil; NSString *interface = nil; //先用:分割
NSArray *components = [interfaceDescription componentsSeparatedByString:@":"];
if ([components count] > )
{
NSString *temp = [components objectAtIndex:];
if ([temp length] > )
{
interface = temp;
}
}
if ([components count] > && port == )
{
//拿到port strtol函数,将一个字符串,根据base参数转成长整型,如base值为10则采用10进制,若base值为16则采用16进制
long portL = strtol([[components objectAtIndex:] UTF8String], NULL, );
//UINT16_MAX,65535最大端口号
if (portL > && portL <= UINT16_MAX)
{
port = (uint16_t)portL;
}
} //为空则自己创建一个 0x00000000 ,全是0 ,为线路地址
//如果端口为0 通常用于分析操作系统。这一方法能够工作是因为在一些系统中“0”是无效端口,当你试图使用通常的闭合端口连接它时将产生不同的结果。一种典型的扫描,使用IP地址为0.0.0.0,设置ACK位并在以太网层广播。
if (interface == nil)
{ struct sockaddr_in sockaddr4; //memset作用是在一段内存块中填充某个给定的值,它是对较大的结构体或数组进行清零操作的一种最快方法 //memset(void *s,int ch,size_t n);函数,第一个参数为指针地址,第二个为设置值,第三个为连续设置的长度(大小)
memset(&sockaddr4, , sizeof(sockaddr4));
//结构体长度
sockaddr4.sin_len = sizeof(sockaddr4);
//addressFamily IPv4(AF_INET) 或 IPv6(AF_INET6)。
sockaddr4.sin_family = AF_INET;
//端口号 htons将主机字节顺序转换成网络字节顺序 16位
sockaddr4.sin_port = htons(port);
//htonl ,将INADDR_ANY:0.0.0.0,不确定地址,或者任意地址 htonl 32位。 也是转为网络字节序 //ipv4 32位 4个字节 INADDR_ANY,0x00000000 (16进制,一个0代表4位,8个0就是32位) = 4个字节的
sockaddr4.sin_addr.s_addr = htonl(INADDR_ANY);
struct sockaddr_in6 sockaddr6;
memset(&sockaddr6, , sizeof(sockaddr6)); sockaddr6.sin6_len = sizeof(sockaddr6);
//ipv6
sockaddr6.sin6_family = AF_INET6;
//port
sockaddr6.sin6_port = htons(port); //共128位
sockaddr6.sin6_addr = in6addr_any; //把这两个结构体转成data
addr4 = [NSMutableData dataWithBytes:&sockaddr4 length:sizeof(sockaddr4)];
addr6 = [NSMutableData dataWithBytes:&sockaddr6 length:sizeof(sockaddr6)];
}
//如果localhost、loopback 回环地址,虚拟地址,路由器工作它就存在。一般用来标识路由器
//这两种的话就赋值为127.0.0.1,端口为port
else if ([interface isEqualToString:@"localhost"] || [interface isEqualToString:@"loopback"])
{
// LOOPBACK address //ipv4
struct sockaddr_in sockaddr4;
memset(&sockaddr4, , sizeof(sockaddr4)); sockaddr4.sin_len = sizeof(sockaddr4);
sockaddr4.sin_family = AF_INET;
sockaddr4.sin_port = htons(port); //#define INADDR_LOOPBACK (u_int32_t)0x7f000001
//7f000001->1111111 00000000 00000000 00000001->127.0.0.1
sockaddr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK); //ipv6
struct sockaddr_in6 sockaddr6;
memset(&sockaddr6, , sizeof(sockaddr6)); sockaddr6.sin6_len = sizeof(sockaddr6);
sockaddr6.sin6_family = AF_INET6;
sockaddr6.sin6_port = htons(port); sockaddr6.sin6_addr = in6addr_loopback;
//赋值
addr4 = [NSMutableData dataWithBytes:&sockaddr4 length:sizeof(sockaddr4)];
addr6 = [NSMutableData dataWithBytes:&sockaddr6 length:sizeof(sockaddr6)];
}
//非localhost、loopback,去获取本机IP,看和传进来Interface是同名或者同IP,相同才给赋端口号,把数据封装进Data。否则为nil
else
{
//转成cString
const char *iface = [interface UTF8String]; //定义结构体指针,这个指针是本地IP
struct ifaddrs *addrs;
const struct ifaddrs *cursor; //获取到本机IP,为0说明成功了
if ((getifaddrs(&addrs) == ))
{
//赋值
cursor = addrs;
//如果IP不为空,则循环链表去设置
while (cursor != NULL)
{
//如果 addr4 IPV4地址为空,而且地址类型为IPV4
if ((addr4 == nil) && (cursor->ifa_addr->sa_family == AF_INET))
{
// IPv4 struct sockaddr_in nativeAddr4;
//memcpy内存copy函数,把src开始到size的字节数copy到 dest中
memcpy(&nativeAddr4, cursor->ifa_addr, sizeof(nativeAddr4)); //比较两个字符串是否相同,本机的IP名,和接口interface是否相同
if (strcmp(cursor->ifa_name, iface) == )
{
// Name match
//相同则赋值 port
nativeAddr4.sin_port = htons(port);
//用data封号IPV4地址
addr4 = [NSMutableData dataWithBytes:&nativeAddr4 length:sizeof(nativeAddr4)];
}
//本机IP名和interface不相同
else
{
//声明一个IP 16位的数组
char ip[INET_ADDRSTRLEN]; //这里是转成了10进制。。(因为获取到的是二进制IP)
const char *conversion = inet_ntop(AF_INET, &nativeAddr4.sin_addr, ip, sizeof(ip)); //如果conversion不为空,说明转换成功而且 ,比较转换后的IP,和interface是否相同
if ((conversion != NULL) && (strcmp(ip, iface) == ))
{
// IP match
//相同则赋值 port
nativeAddr4.sin_port = htons(port); addr4 = [NSMutableData dataWithBytes:&nativeAddr4 length:sizeof(nativeAddr4)];
}
}
}
//IPV6 一样
else if ((addr6 == nil) && (cursor->ifa_addr->sa_family == AF_INET6))
{
// IPv6 struct sockaddr_in6 nativeAddr6;
memcpy(&nativeAddr6, cursor->ifa_addr, sizeof(nativeAddr6)); if (strcmp(cursor->ifa_name, iface) == )
{
// Name match nativeAddr6.sin6_port = htons(port); addr6 = [NSMutableData dataWithBytes:&nativeAddr6 length:sizeof(nativeAddr6)];
}
else
{
char ip[INET6_ADDRSTRLEN]; const char *conversion = inet_ntop(AF_INET6, &nativeAddr6.sin6_addr, ip, sizeof(ip)); if ((conversion != NULL) && (strcmp(ip, iface) == ))
{
// IP match nativeAddr6.sin6_port = htons(port); addr6 = [NSMutableData dataWithBytes:&nativeAddr6 length:sizeof(nativeAddr6)];
}
}
} //指向链表下一个addr
cursor = cursor->ifa_next;
}
//和getifaddrs对应,释放这部分内存
freeifaddrs(addrs);
}
}
//如果这两个二级指针存在,则取成一级指针,把addr4赋值给它
if (interfaceAddr4Ptr) *interfaceAddr4Ptr = addr4;
if (interfaceAddr6Ptr) *interfaceAddr6Ptr = addr6;

这个方法中,主要是大量的socket相关的函数的调用,会显得比较难读一点,其实简单来讲就做了这么一件事:
把interface变成进行socket操作所需要的地址结构体,然后把地址结构体包裹在NSMuttableData中。

这里,为了让大家能更容易理解,我把这个方法涉及到的socket相关函数以及宏(按照调用顺序)都列出来:

//拿到port strtol函数,将一个字符串,根据base参数转成长整型,
//如base值为10则采用10进制,若base值为16则采用16进制
long strtol(const char *__str, char **__endptr, int __base); //作用是在一段内存块中填充某个给定的值,它是对较大的结构体或数组进行清零操作的一种最快方法
//第一个参数为指针地址,第二个为设置值,第三个为连续设置的长度(大小)
memset(void *s,int ch,size_t n); //最大端口号
#define UINT16_MAX 65535 //作用是把主机字节序转化为网络字节序
htons() //参数16位
htonl() //参数32位
//获取占用内存大小
sizeof()
//比较两个指针,是否相同 相同返回0
int strcmp(const char *__s1, const char *__s2) //内存copu函数,把src开始到len的字节数copy到 dest中
memcpy(dest, src, len) //inet_pton和inet_ntop这2个IP地址转换函数,可以在将IP地址在“点分十进制”和“二进制整数”之间转换
//参数socklen_t cnt,他是所指向缓存区dst的大小,避免溢出,如果缓存区太小无法存储地址的值,则返回一个空指针,并将errno置为ENOSPC
const char *inet_ntop(int af, const void *src, char *dst, socklen_t cnt); //得到本机地址
extern int getifaddrs(struct ifaddrs **);
//释放本机地址
extern void freeifaddrs(struct ifaddrs *);

还有一些用到的作为参数的结构体:

//socket通信用的 IPV4地址结构体
struct sockaddr_in {
__uint8_t sin_len; //整个结构体大小
sa_family_t sin_family; //协议族,IPV4?IPV6
in_port_t sin_port; //端口
struct in_addr sin_addr; //IP地址
char sin_zero[]; //空的占位符,为了和其他地址结构体保持一致大小,方便转化
};
//IPV6地址结构体,和上面的类似
struct sockaddr_in6 {
__uint8_t sin6_len; /* length of this struct(sa_family_t) */
sa_family_t sin6_family; /* AF_INET6 (sa_family_t) */
in_port_t sin6_port; /* Transport layer port # (in_port_t) */
__uint32_t sin6_flowinfo; /* IP6 flow information */
struct in6_addr sin6_addr; /* IP6 address */
__uint32_t sin6_scope_id; /* scope zone index */
}; //用来获取本机IP的参数结构体
struct ifaddrs {
//指向链表的下一个成员
struct ifaddrs *ifa_next;
//接口名称
char *ifa_name;
//接口标识位(比如当IFF_BROADCAST或IFF_POINTOPOINT设置到此标识位时,影响联合体变量ifu_broadaddr存储广播地址或ifu_dstaddr记录点对点地址)
unsigned int ifa_flags;
//接口地址
struct sockaddr *ifa_addr;
//存储该接口的子网掩码;
struct sockaddr *ifa_netmask; //点对点的地址
struct sockaddr *ifa_dstaddr;
//ifa_data存储了该接口协议族的特殊信息,它通常是NULL(一般不关注他)。
void *ifa_data;
};

这一段内容算是比较枯涩了,但是也是了解socket编程必经之路。

这里提到了网络字节序和主机字节序。我们创建socket之前,必须把port和host这些参数转化为网络字节序。那么为什么要这么做呢?

不同的CPU有不同的字节序类型 这些字节序是指整数在内存中保存的顺序 这个叫做主机序
最常见的有两种
1. Little endian:将低序字节存储在起始地址
2. Big endian:将高序字节存储在起始地址

这样如果我们到网络中,就无法得知互相的字节序是什么了,所以我们就必须统一一套排序,这样网络字节序就有它存在的必要了。

网络字节顺序是TCP/IP中规定好的一种数据表示格式,它与具体的CPU类型、操作系统等无关。从而可以保证数据在不同主机之间传输时能够被正确解释。网络字节顺序采用big endian排序方式。

大家感兴趣可以到这篇文章中去看看:网络字节序与主机字节序

除此之外比较重要的就是这几个地址结构体了。它定义了我们当前socket的地址信息。包括IP、Port、长度、协议族等等。当然socket中标识为地址的结构体不止这3种,等我们后续代码来补充。

大家了解了我们上述说的知识点,这个方法也就不难度了。这个方法主要是做了本机IPV4IPV6地址的创建和绑定。当然这里分了几种情况:

1、interface为空的,我们作为客户端不会出现这种情况。注意之前我们是这个参数不为空才会调入这个方法的。

而这个一般是用于做服务端监听用的,这里的处理是给本机地址绑定0地址(任意地址)。那么这里这么做作用是什么呢?引用一个应用场景来说明:

如果你的服务器有多个网卡(每个网卡上有不同的IP地址),而你的服务(不管是在udp端口上侦听,还是在tcp端口上侦听),出于某种原因:可能是你的服务器操作系统可能随
时增减IP地址,也有可能是为了省去确定服务器上有什么网络端口(网卡)的麻烦 —— 可以要在调用bind()的时候,告诉操作系统:“我需要在 yyyy 端口上侦听,所有发送到
服务器的这个端口,不管是哪个网卡/哪个IP地址接收到的数据,都是我处理的。”这时候,服务器程序则在0.0.0.0这个地址上进行侦听。

2、如果interface为localhost或者loopback则把IP设置为127.0.0.1,这里localhost我们大家都知道。那么什么是loopback呢?

loopback地址叫做回环地址,他不是一个物理接口上的地址,他是一个虚拟的一个地址,只要路由器在工作,这个地址就存在.它是路由器的唯一标识。
更详细的内容可以看看百科:loopback

  3、如果是一个其他的地址,我们会去使用getifaddrs()函数得到本机地址。然后去对比本机名或者本机IP。有一个能相同,我们就认为该地址有效,就进行IPV4和IPV6绑定。否则什么都不做。

至此这个本机地址绑定我们就做完了,我们前面也说过,一般我们作为客户端,是不需要做这一步的。如果我们不绑定,系统会自己绑定本机IP,并且选择一个空闲可用的端口。所以这个方法是iOS用来作为服务端调用的。

方法三--前置检查、方法四--本机地址绑定都说完了,我们继续接着之前的方法二往下看:

之前讲到第3点了:
3.这里把flag标记为kSocketStarted:

flags |= kSocketStarted;

源码中大量的运用了3个位运算符:分别是或(|)、与(&)、取反(~)、运算符。 运用这个标记的好处也很明显,可以很简单的标记当前的状态,并且因为flags所指向的枚举值是用左位移的方式:

enum GCDAsyncSocketFlags
{
kSocketStarted = << , // If set, socket has been started (accepting/connecting)
kConnected = << , // If set, the socket is connected
kForbidReadsWrites = << , // If set, no new reads or writes are allowed
kReadsPaused = << , // If set, reads are paused due to possible timeout
kWritesPaused = << , // If set, writes are paused due to possible timeout
kDisconnectAfterReads = << , // If set, disconnect after no more reads are queued
kDisconnectAfterWrites = << , // If set, disconnect after no more writes are queued
kSocketCanAcceptBytes = << , // If set, we know socket can accept bytes. If unset, it's unknown.
kReadSourceSuspended = << , // If set, the read source is suspended
kWriteSourceSuspended = << , // If set, the write source is suspended
kQueuedTLS = << , // If set, we've queued an upgrade to TLS
kStartingReadTLS = << , // If set, we're waiting for TLS negotiation to complete
kStartingWriteTLS = << , // If set, we're waiting for TLS negotiation to complete
kSocketSecure = << , // If set, socket is using secure communication via SSL/TLS
kSocketHasReadEOF = << , // If set, we have read EOF from socket
kReadStreamClosed = << , // If set, we've read EOF plus prebuffer has been drained
kDealloc = << , // If set, the socket is being deallocated
#if TARGET_OS_IPHONE
kAddedStreamsToRunLoop = << , // If set, CFStreams have been added to listener thread
kUsingCFStreamForTLS = << , // If set, we're forced to use CFStream instead of SecureTransport
kSecureSocketHasBytesAvailable = << , // If set, CFReadStream has notified us of bytes available
#endif
};

所以flags可以通过|的方式复合横跨多个状态,并且运算也非常轻量级,好处很多,所有的状态标记的意义可以在注释中清晰的看出,这里把状态标记为socket已经开始连接了。

4.然后我们调用了一个全局queue,异步的调用连接,这里又做了两件事:

  • 第一步是拿到我们需要连接的服务端server的地址数组:
    //server地址数组(包含IPV4 IPV6的地址  sockaddr_in6、sockaddr_in类型)
    NSMutableArray *addresses = [[self class] lookupHost:hostCpy port:port error:&lookupErr];
  • 第二步是做一些错误判断,并且把地址信息赋值到address6和address6中去,然后异步调用回socketQueue去用另一个方法去发起连接:

  • //异步去发起连接
    dispatch_async(strongSelf->socketQueue, ^{ @autoreleasepool { [strongSelf lookup:aStateIndex didSucceedWithAddress4:address4 address6:address6];
    }}); 
  • 在这个方法中我们可以看到作者这里把创建server地址这些费时的逻辑操作放在了异步线程中并发进行。然后得到数据之后又回到了我们的socketQueue发起下一步的连接。

然后这里又是两个很大块的分支,首先我们来看看server地址的获取:

本文方法五--创建服务端server地址数据

//根据host、port
+ (NSMutableArray *)lookupHost:(NSString *)host port:(uint16_t)port error:(NSError **)errPtr
{
LogTrace(); NSMutableArray *addresses = nil;
NSError *error = nil; //如果Host是这localhost或者loopback
if ([host isEqualToString:@"localhost"] || [host isEqualToString:@"loopback"])
{
// Use LOOPBACK address
struct sockaddr_in nativeAddr4;
nativeAddr4.sin_len = sizeof(struct sockaddr_in);
nativeAddr4.sin_family = AF_INET;
nativeAddr4.sin_port = htons(port);
nativeAddr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
//占位置0
memset(&(nativeAddr4.sin_zero), , sizeof(nativeAddr4.sin_zero)); //ipv6
struct sockaddr_in6 nativeAddr6;
nativeAddr6.sin6_len = sizeof(struct sockaddr_in6);
nativeAddr6.sin6_family = AF_INET6;
nativeAddr6.sin6_port = htons(port);
nativeAddr6.sin6_flowinfo = ;
nativeAddr6.sin6_addr = in6addr_loopback;
nativeAddr6.sin6_scope_id = ; // Wrap the native address structures NSData *address4 = [NSData dataWithBytes:&nativeAddr4 length:sizeof(nativeAddr4)];
NSData *address6 = [NSData dataWithBytes:&nativeAddr6 length:sizeof(nativeAddr6)]; //两个添加进数组
addresses = [NSMutableArray arrayWithCapacity:];
[addresses addObject:address4];
[addresses addObject:address6];
}
else
{
//拿到port String
NSString *portStr = [NSString stringWithFormat:@"%hu", port]; //定义三个addrInfo 是一个sockaddr结构的链表而不是一个地址清单 struct addrinfo hints, *res, *res0; //初始化为0
memset(&hints, , sizeof(hints)); //相当于 AF_UNSPEC ,返回的是适用于指定主机名和服务名且适合任何协议族的地址。
hints.ai_family = PF_UNSPEC;
hints.ai_socktype = SOCK_STREAM;
hints.ai_protocol = IPPROTO_TCP; //根据host port,去获取地址信息。 int gai_error = getaddrinfo([host UTF8String], [portStr UTF8String], &hints, &res0); //出错
if (gai_error)
{ //获取到错误
error = [self gaiError:gai_error];
}
//正确获取到addrInfo
else
{
//
NSUInteger capacity = ;
//遍历 res0
for (res = res0; res; res = res->ai_next)
{
//如果有IPV4 IPV6的,capacity+1
if (res->ai_family == AF_INET || res->ai_family == AF_INET6) {
capacity++;
}
}
//生成一个地址数组,数组为capacity大小
addresses = [NSMutableArray arrayWithCapacity:capacity]; //再去遍历,为什么不一次遍历完,仅仅是为了限制数组的大小?
for (res = res0; res; res = res->ai_next)
{
//IPV4
if (res->ai_family == AF_INET)
{
// Found IPv4 address.
// Wrap the native address structure, and add to results.
//加到数组中
NSData *address4 = [NSData dataWithBytes:res->ai_addr length:res->ai_addrlen];
[addresses addObject:address4];
}
else if (res->ai_family == AF_INET6)
{
// Fixes connection issues with IPv6
// https://github.com/robbiehanson/CocoaAsyncSocket/issues/429#issuecomment-222477158 // Found IPv6 address.
// Wrap the native address structure, and add to results.
//强转
struct sockaddr_in6 *sockaddr = (struct sockaddr_in6 *)res->ai_addr;
//拿到port
in_port_t *portPtr = &sockaddr->sin6_port;
//如果Port为0
if ((portPtr != NULL) && (*portPtr == )) {
//赋值,用传进来的port
*portPtr = htons(port);
}
//添加到数组
NSData *address6 = [NSData dataWithBytes:res->ai_addr length:res->ai_addrlen];
[addresses addObject:address6];
}
}
//对应getaddrinfo 释放内存
freeaddrinfo(res0); //如果地址里一个没有,报错 EAI_FAIL:名字解析中不可恢复的失败
if ([addresses count] == )
{
error = [self gaiError:EAI_FAIL];
}
}
}
//赋值错误
if (errPtr) *errPtr = error;
//返回地址
return addresses;
}

这个方法根据host进行了划分:

  1. 如果hostlocalhost或者loopback,则按照我们之前绑定本机地址那一套生成地址的方式,去生成IPV4和IPV6的地址,并且用NSData包裹住这个地址结构体,装在NSMutableArray中。
  2. 不是本机地址,那么我们就需要根据host和port去创建地址了,这里用到的是这么一个函数:

  3. int getaddrinfo( const char *hostname, const char *service, const struct addrinfo *hints, struct addrinfo **result );

    这个函数主要的作用是:根据hostname(IP),service(port),去获取地址信息,并且把地址信息传递到result中。
    而hints这个参数可以是一个空指针,也可以是一个指向某个addrinfo结构体的指针,如果填了,其实它就是一个配置参数,返回的地址信息会和这个配置参数的内容有关,如下例:

  4. 举例来说:指定的服务既可支持TCP也可支持UDP,所以调用者可以把hints结构中的ai_socktype成员设置成SOCK_DGRAM使得返回的仅仅是适用于数据报套接口的信息。

    这里我们可以看到result和hints这两个参数指针指向的都是一个addrinfo的结构体,这是我们继上面以来看到的第4种地址结构体了。它的定义如下:

  5. struct addrinfo {
    int ai_flags; /* AI_PASSIVE, AI_CANONNAME, AI_NUMERICHOST */
    int ai_family; /* PF_xxx */
    int ai_socktype; /* SOCK_xxx */
    int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */
    socklen_t ai_addrlen; /* length of ai_addr */
    char *ai_canonname; /* canonical name for hostname */
    struct sockaddr *ai_addr; /* binary address */
    struct addrinfo *ai_next; /* next structure in linked list */
    };
    1. 我们可以看到它其中包括了一个IPV4的结构体地址ai_addr,还有一个指向下一个同类型数据节点的指针ai_next
      其他参数和之前的地址结构体一些参数作用类似,大家可以对着注释很好理解,或者仍有疑惑可以看看这篇:
      socket编程之addrinfo结构体与getaddrinfo函数
      这里讲讲ai_next这个指针,因为我们是去获取server端的地址,所以很可能有不止一个地址,比如IPV4、IPV6,又或者我们之前所说的一个服务器有多个网卡,这时候可能就会有多个地址。这些地址就会用ai_next指针串联起来,形成一个单链表。

      然后我们拿到这个地址链表,去遍历它,对应取出IPV4、IPV6的地址,封装成NSData并装到数组中去。

    2. 如果中间有错误,赋值错误,返回地址数组,理清楚这几个结构体与函数,这个方法还是相当容易读的,具体的细节可以看看注释。

    接着我们回到本文方法二,就要用这个地址数组去做连接了。

    //异步去发起连接
    dispatch_async(strongSelf->socketQueue, ^{ @autoreleasepool { [strongSelf lookup:aStateIndex didSucceedWithAddress4:address4 address6:address6];
    }});

这里调用了我们本文方法六--开始连接的方法1

 //连接的最终方法 1
- (void)lookup:(int)aStateIndex didSucceedWithAddress4:(NSData *)address4 address6:(NSData *)address6
{
LogTrace(); NSAssert(dispatch_get_specific(IsOnSocketQueueOrTargetQueueKey), @"Must be dispatched on socketQueue");
//至少有一个server地址
NSAssert(address4 || address6, @"Expected at least one valid address"); //如果状态不一致,说明断开连接
if (aStateIndex != stateIndex)
{
LogInfo(@"Ignoring lookupDidSucceed, already disconnected"); // The connect operation has been cancelled.
// That is, socket was disconnected, or connection has already timed out.
return;
} // Check for problems
//分开判断。
BOOL isIPv4Disabled = (config & kIPv4Disabled) ? YES : NO;
BOOL isIPv6Disabled = (config & kIPv6Disabled) ? YES : NO; if (isIPv4Disabled && (address6 == nil))
{
NSString *msg = @"IPv4 has been disabled and DNS lookup found no IPv6 address."; [self closeWithError:[self otherError:msg]];
return;
} if (isIPv6Disabled && (address4 == nil))
{
NSString *msg = @"IPv6 has been disabled and DNS lookup found no IPv4 address."; [self closeWithError:[self otherError:msg]];
return;
} // Start the normal connection process NSError *err = nil;
//调用连接方法,如果失败,则错误返回
if (![self connectWithAddress4:address4 address6:address6 error:&err])
{
[self closeWithError:err];
}
}

这个方法也比较简单,基本上就是做了一些错误的判断。比如:

  1. 判断在不在这个socket队列。
  2. 判断传过来的aStateIndex和属性stateIndex是不是同一个值。说到这个值,不得不提的是大神用的框架,在容错处理上,做的真不是一般的严谨。从这个stateIndex上就能略见一二。
    这个aStateIndex是我们之前调用方法,用属性传过来的,所以按道理说,是肯定一样的。但是就怕在调用过程中,这个值发生了改变,这时候整个socket配置也就完全不一样了,有可能我们已经置空地址、销毁socket、断开连接等等...等我们后面再来看这个属性stateIndex在什么地方会发生改变。
  3. 判断config中是需要哪种配置,它的参数对应了一个枚举:
  4. enum GCDAsyncSocketConfig
    {
    kIPv4Disabled = << , // If set, IPv4 is disabled
    kIPv6Disabled = << , // If set, IPv6 is disabled
    kPreferIPv6 = << , // If set, IPv6 is preferred over IPv4
    kAllowHalfDuplexConnection = << , // If set, the socket will stay open even if the read stream closes
    };

前3个大家很好理解,无非就是用IPV4还是IPV6。

而第4个官方注释意思是,我们即使关闭读的流,也会保持Socket开启。至于具体是什么意思,我们先不在这里讨论,等后文再说。

这里调用了我们本文方法七--开始连接的方法2

 //连接最终方法 2。用两个Server地址去连接,失败返回NO,并填充error
- (BOOL)connectWithAddress4:(NSData *)address4 address6:(NSData *)address6 error:(NSError **)errPtr
{
LogTrace(); NSAssert(dispatch_get_specific(IsOnSocketQueueOrTargetQueueKey), @"Must be dispatched on socketQueue"); //输出一些东西?
LogVerbose(@"IPv4: %@:%hu", [[self class] hostFromAddress:address4], [[self class] portFromAddress:address4]);
LogVerbose(@"IPv6: %@:%hu", [[self class] hostFromAddress:address6], [[self class] portFromAddress:address6]); // Determine socket type //判断是否倾向于IPV6
BOOL preferIPv6 = (config & kPreferIPv6) ? YES : NO; // Create and bind the sockets //如果有IPV4地址,创建IPV4 Socket
if (address4)
{
LogVerbose(@"Creating IPv4 socket"); socket4FD = [self createSocket:AF_INET connectInterface:connectInterface4 errPtr:errPtr];
}
//如果有IPV6地址,创建IPV6 Socket
if (address6)
{
LogVerbose(@"Creating IPv6 socket"); socket6FD = [self createSocket:AF_INET6 connectInterface:connectInterface6 errPtr:errPtr];
} //如果都为空,直接返回
if (socket4FD == SOCKET_NULL && socket6FD == SOCKET_NULL)
{
return NO;
} //主选socketFD,备选alternateSocketFD
int socketFD, alternateSocketFD;
//主选地址和备选地址
NSData *address, *alternateAddress; //IPV6
if ((preferIPv6 && socket6FD) || socket4FD == SOCKET_NULL)
{
socketFD = socket6FD;
alternateSocketFD = socket4FD;
address = address6;
alternateAddress = address4;
}
//主选IPV4
else
{
socketFD = socket4FD;
alternateSocketFD = socket6FD;
address = address4;
alternateAddress = address6;
}
//拿到当前状态
int aStateIndex = stateIndex;
//用socket和address去连接
[self connectSocket:socketFD address:address stateIndex:aStateIndex]; //如果有备选地址
if (alternateAddress)
{
//延迟去连接备选的地址
dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(alternateAddressDelay * NSEC_PER_SEC)), socketQueue, ^{
[self connectSocket:alternateSocketFD address:alternateAddress stateIndex:aStateIndex];
});
} return YES;
}

这个方法也仅仅是连接中过渡的一个方法,做的事也非常简单:

  1. 就是拿到IPV4和IPV6地址,先去创建对应的socket,注意这个socket是本机客户端的,和server端没有关系。这里服务端的IPV4和IPV6地址仅仅是用来判断是否需要去创建对应的本机Socket。这里去创建socket会带上我们之前生成的本地地址信息connectInterface4或者connectInterface6
  2. 根据我们的config配置,得到主选连接和备选连接。 然后先去连接主选连接地址,在用我们一开始初始化中设置的属性alternateAddressDelay,就是这个备选连接延时的属性,去延时连接备选地址(当然如果主选地址在此时已经连接成功,会再次连接导致socket错误,并且关闭)。

这两步分别调用了各自的方法去实现,接下来我们先来看创建本机Socket的方法:

本文方法八--创建Socket:

 //创建Socket
- (int)createSocket:(int)family connectInterface:(NSData *)connectInterface errPtr:(NSError **)errPtr
{
//创建socket,用的SOCK_STREAM TCP流
int socketFD = socket(family, SOCK_STREAM, );
//如果创建失败
if (socketFD == SOCKET_NULL)
{
if (errPtr)
*errPtr = [self errnoErrorWithReason:@"Error in socket() function"]; return socketFD;
} //和connectInterface绑定
if (![self bindSocket:socketFD toInterface:connectInterface error:errPtr])
{
//绑定失败,直接关闭返回
[self closeSocket:socketFD]; return SOCKET_NULL;
} // Prevent SIGPIPE signals
//防止终止进程的信号?
int nosigpipe = ;
//SO_NOSIGPIPE是为了避免网络错误,而导致进程退出。用这个来避免系统发送signal
setsockopt(socketFD, SOL_SOCKET, SO_NOSIGPIPE, &nosigpipe, sizeof(nosigpipe)); return socketFD;
}

这个方法做了这么几件事:

1、创建了一个socket:

  1. //创建一个socket,返回值为Int。(注scoket其实就是Int类型)
    //第一个参数addressFamily IPv4(AF_INET) 或 IPv6(AF_INET6)。
    //第二个参数 type 表示 socket 的类型,通常是流stream(SOCK_STREAM) 或数据报文datagram(SOCK_DGRAM)
    //第三个参数 protocol 参数通常设置为0,以便让系统自动为选择我们合适的协议,对于 stream socket 来说会是 TCP 协议(IPPROTO_TCP),而对于 datagram来说会是 UDP 协议(IPPROTO_UDP)。
    int socketFD = socket(family, SOCK_STREAM, );

2、其实这个函数在之前那篇IM文章中也讲过了,大家参考参考注释看看就可以了,这里如果返回值为-1,说明创建失败。

3、去绑定我们之前创建的本地地址,它调用了另外一个方法来实现。

4、最后我们调用了如下函数:

setsockopt(socketFD, SOL_SOCKET, SO_NOSIGPIPE, &nosigpipe, sizeof(nosigpipe));

5、那么这个函数是做什么用的呢?简单来说,它就是给我们的socket加一些额外的设置项,来配置socket的一些行为。它还有许多的用法,具体可以参考这篇文章:setsockopt函数

而这里的目的是为了来避免网络错误而出现的进程退出的情况,调用了这行函数,网络错误后,系统不再发送进程退出的信号。
关于这个进程退出的错误可以参考这篇文章:Mac OSX下SO_NOSIGPIPE的怪异表现

总结,本文未完,续下节 :iOS即时通讯之CocoaAsyncSocket源码解析二