Docker环境下的前后端分离部署与运维

时间:2022-08-28 11:28:17

Docker虚拟机常用命令

  1. 先更新软件包
    yum -y update
    
     
  2. 安装Docker虚拟机
    yum install -y docker
    
     
  3. 运行、重启、关闭Docker虚拟机
    service docker start
    service docker start
    service docker stop
    
     
  4. 搜索镜像
    docker search 镜像名称
    
     
  5. 下载镜像
    docker pull 镜像名称
    
     
  6. 查看镜像
    docker images
    
     
  7. 删除镜像
    docker rmi 镜像名称
    
     
  8. 运行容器
    docker run 启动参数  镜像名称
    
     
  9. 查看容器列表
    docker ps -a
    
     
  10. 停止、挂起、恢复容器
    docker stop 容器ID
    docker pause 容器ID
    docker unpase 容器ID
    
     
  11. 查看容器信息
    docker inspect 容器ID
    
     
  12. 删除容器
    docker rm 容器ID
    
     
  13. 数据卷管理
    docker volume create 数据卷名称  #创建数据卷
    docker volume rm 数据卷名称  #删除数据卷
    docker volume inspect 数据卷名称  #查看数据卷
    
     
  14. 网络管理
    docker network ls 查看网络信息
    docker network create --subnet=网段 网络名称
    docker network rm 网络名称
    
     
  15. 避免VM虚拟机挂起恢复之后,Docker虚拟机断网
        vi /etc/sysctl.conf
    
     

    文件中添加net.ipv4.ip_forward=1这个配置

    #重启网络服务
    systemctl  restart network
    
     

安装PXC集群,负载均衡,双机热备

  1. 安装PXC镜像
    docker pull percona/percona-xtradb-cluster
    
     
  2. 为PXC镜像改名
    docker tag percona/percona-xtradb-cluster pxc
    
     
  3. 创建net1网段
    docker network create --subnet=172.18.0.0/16 net1
    
     
  4. 创建5个数据卷
    docker volume create --name v1
    docker volume create --name v2
    docker volume create --name v3
    docker volume create --name v4
    docker volume create --name v5
    
     
  5. 创建备份数据卷(用于热备份数据)
    docker volume create --name backup
    
     
  6. 创建5节点的PXC集群

    注意,每个MySQL容器创建之后,因为要执行PXC的初始化和加入集群等工作,耐心等待1分钟左右再用客户端连接MySQL。另外,必须第1个MySQL节点启动成功,用MySQL客户端能连接上之后,再去创建其他MySQL节点。

    #创建第1个MySQL节点
    docker run -d -p 3306:3306 -e MYSQL_ROOT_PASSWORD=abc123456 -e CLUSTER_NAME=PXC -e XTRABACKUP_PASSWORD=abc123456 -v v1:/var/lib/mysql -v backup:/data --privileged --name=node1 --net=net1 --ip 172.18.0.2 pxc
    #创建第2个MySQL节点
    docker run -d -p 3307:3306 -e MYSQL_ROOT_PASSWORD=abc123456 -e CLUSTER_NAME=PXC -e XTRABACKUP_PASSWORD=abc123456 -e CLUSTER_JOIN=node1 -v v2:/var/lib/mysql -v backup:/data --privileged --name=node2 --net=net1 --ip 172.18.0.3 pxc
    #创建第3个MySQL节点
    docker run -d -p 3308:3306 -e MYSQL_ROOT_PASSWORD=abc123456 -e CLUSTER_NAME=PXC -e XTRABACKUP_PASSWORD=abc123456 -e CLUSTER_JOIN=node1 -v v3:/var/lib/mysql --privileged --name=node3 --net=net1 --ip 172.18.0.4 pxc
    #创建第4个MySQL节点
    docker run -d -p 3309:3306 -e MYSQL_ROOT_PASSWORD=abc123456 -e CLUSTER_NAME=PXC -e XTRABACKUP_PASSWORD=abc123456 -e CLUSTER_JOIN=node1 -v v4:/var/lib/mysql --privileged --name=node4 --net=net1 --ip 172.18.0.5 pxc
    #创建第5个MySQL节点
    docker run -d -p 3310:3306 -e MYSQL_ROOT_PASSWORD=abc123456 -e CLUSTER_NAME=PXC -e XTRABACKUP_PASSWORD=abc123456 -e CLUSTER_JOIN=node1 -v v5:/var/lib/mysql -v backup:/data --privileged --name=node5 --net=net1 --ip 172.18.0.6 pxc
    
     
  7. 安装Haproxy镜像
    docker pull haproxy
    
     
  8. 宿主机上编写Haproxy配置文件
    vi /home/soft/haproxy.cfg
    
     

    配置文件如下:

    global
    #工作目录 chroot /usr/local/etc/haproxy #日志文件,使用rsyslog服务中local5日志设备(/var/log/local5),等级info log 127.0.0.1 local5 info #守护进程运行 daemon defaults log global mode  http #日志格式 option  httplog #日志中不记录负载均衡的心跳检测记录 option  dontlognull  #连接超时(毫秒) timeout connect 5000  #客户端超时(毫秒) timeout client 50000 #服务器超时(毫秒)  timeout server 50000 #监控界面 listen  admin_stats #监控界面的访问的IP和端口 bind  0.0.0.0:8888 #访问协议  mode  http #URI相对地址  stats uri /dbs #统计报告格式  stats realm Global\ statistics #登陆帐户信息  stats auth admin:abc123456 #数据库负载均衡 listen  proxy-mysql #访问的IP和端口 bind  0.0.0.0:3306  #网络协议 mode  tcp #负载均衡算法(轮询算法) #轮询算法:roundrobin #权重算法:static-rr #最少连接算法:leastconn #请求源IP算法:source  balance  roundrobin #日志格式  option  tcplog #在MySQL中创建一个没有权限的haproxy用户,密码为空。Haproxy使用这个账户对MySQL数据库心跳检测。CREATE USER 'haproxy'@'%' IDENTIFIED BY '';  option  mysql-check user haproxy  server  MySQL_1 172.18.0.2:3306 check weight 1 maxconn 2000  server  MySQL_2 172.18.0.3:3306 check weight 1 maxconn 2000 server  MySQL_3 172.18.0.4:3306 check weight 1 maxconn 2000 server  MySQL_4 172.18.0.5:3306 check weight 1 maxconn 2000 server  MySQL_5 172.18.0.6:3306 check weight 1 maxconn 2000 #使用keepalive检测死链  option  tcpka 
     
  9. 创建两个Haproxy容器
    #创建第1个Haproxy负载均衡服务器
    docker run -it -d -p 4001:8888 -p 4002:3306 -v /home/soft/haproxy:/usr/local/etc/haproxy --name h1 --privileged --net=net1 --ip 172.18.0.7 haproxy
    #进入h1容器,启动Haproxy
    docker exec -it h1 bash
    haproxy -f /usr/local/etc/haproxy/haproxy.cfg
    #创建第2个Haproxy负载均衡服务器
    docker run -it -d -p 4003:8888 -p 4004:3306 -v /home/soft/haproxy:/usr/local/etc/haproxy --name h2 --privileged --net=net1 --ip 172.18.0.8 haproxy
    #进入h2容器,启动Haproxy
    docker exec -it h2 bash
    haproxy -f /usr/local/etc/haproxy/haproxy.cfg
    
     
  10. Haproxy容器内安装Keepalived,设置虚拟IP
    #进入h1容器
    docker exec -it h1 bash
    #更新软件包
    apt-get update
    #安装VIM
    apt-get install vim
    #安装Keepalived
    apt-get install keepalived
    #编辑Keepalived配置文件(参考下方配置文件)
    vim /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    #宿主机执行ping命令
    ping 172.18.0.201
    
     

    配置文件内容如下:

    vrrp_instance  VI_1 {
        state  MASTER
        interface  eth0
        virtual_router_id  51
        priority  100
        advert_int  1
        authentication {
            auth_type  PASS
            auth_pass  123456
        }
        virtual_ipaddress {
            172.18.0.201
        }
    }
    
     
    #进入h2容器
    docker exec -it h2 bash
    #更新软件包
    apt-get update
    #安装VIM
    apt-get install vim
    #安装Keepalived
    apt-get install keepalived
    #编辑Keepalived配置文件
    vim /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    #宿主机执行ping命令
    ping 172.18.0.201
    
     

    配置文件内容如下:

    vrrp_instance  VI_1 {
        state  MASTER
        interface  eth0
        virtual_router_id  51
        priority  100
        advert_int  1
        authentication {
            auth_type  PASS
            auth_pass  123456
        }
        virtual_ipaddress {
            172.18.0.201
        }
    }
    
     
  11. 宿主机安装Keepalived,实现双击热备
    #宿主机执行安装Keepalived
    yum -y install keepalived
    #修改Keepalived配置文件
    vi /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    
     

    Keepalived配置文件如下:

    vrrp_instance VI_1 {
        state MASTER
        interface ens33
        virtual_router_id 51
        priority 100
        advert_int 1
        authentication {
            auth_type PASS
            auth_pass 1111
        }
        virtual_ipaddress {
            192.168.99.150
        }
    }
    
    virtual_server 192.168.99.150 8888 {
        delay_loop 3
        lb_algo rr
        lb_kind NAT
        persistence_timeout 50
        protocol TCP
    
        real_server 172.18.0.201 8888 {
            weight 1
        }
    }
    
    virtual_server 192.168.99.150 3306 {
        delay_loop 3
        lb_algo rr
        lb_kind NAT
        persistence_timeout 50
        protocol TCP
    
        real_server 172.18.0.201 3306 {
            weight 1
        }
    }
    
     
  12. 热备份数据
    #进入node1容器
    docker exec -it node1 bash
    #更新软件包
    apt-get update
    #安装热备工具
    apt-get install percona-xtrabackup-24
    #全量热备
    innobackupex --user=root --password=abc123456 /data/backup/full
    
     
  13. 冷还原数据
    停止其余4个节点,并删除节点

     

    docker stop node2
    docker stop node3
    docker stop node4
    docker stop node5
    docker rm node2
    docker rm node3
    docker rm node4
    docker rm node5
    
     
     

    node1容器中删除MySQL的数据

    #删除数据
    rm -rf /var/lib/mysql/*
    #清空事务
    innobackupex --user=root --password=abc123456 --apply-back /data/backup/full/2018-04-15_05-09-07/
    #还原数据
    innobackupex --user=root --password=abc123456 --copy-back  /data/backup/full/2018-04-15_05-09-07/
    
     

    重新创建其余4个节点,组件PXC集群

安装Redis,配置RedisCluster集群

  1. 安装Redis镜像

    docker pull yyyyttttwwww/redis
    
     
  2. 创建net2网段
    docker network create --subnet=172.19.0.0/16 net2
    
     
  3. 创建6节点Redis容器
    docker run -it -d --name r1 -p 5001:6379 --net=net2 --ip 172.19.0.2 redis bash
    docker run -it -d --name r2 -p 5002:6379 --net=net2 --ip 172.19.0.3 redis bash
    docker run -it -d --name r3 -p 5003:6379 --net=net2 --ip 172.19.0.4 redis bash
    docker run -it -d --name r4 -p 5004:6379 --net=net2 --ip 172.19.0.5 redis bash
    docker run -it -d --name r5 -p 5005:6379 --net=net2 --ip 172.19.0.6 redis bash
    
     
  4. 启动6节点Redis服务器
    #进入r1节点
    docker exec -it r1 bash
    cp /home/redis/redis.conf /usr/redis/redis.conf
    cd /usr/redis/src
    ./redis-server ../redis.conf
    #进入r2节点
    docker exec -it r2 bash
    cp /home/redis/redis.conf /usr/redis/redis.conf
    cd /usr/redis/src
    ./redis-server ../redis.conf
    #进入r3节点
    docker exec -it r3 bash
    cp /home/redis/redis.conf /usr/redis/redis.conf
    cd /usr/redis/src
    ./redis-server ../redis.conf
    #进入r4节点
    docker exec -it r4 bash
    cp /home/redis/redis.conf /usr/redis/redis.conf
    cd /usr/redis/src
    ./redis-server ../redis.conf
    #进入r5节点
    docker exec -it r5 bash
    cp /home/redis/redis.conf /usr/redis/redis.conf
    cd /usr/redis/src
    ./redis-server ../redis.conf
    #进入r6节点
    docker exec -it r6 bash
    cp /home/redis/redis.conf /usr/redis/redis.conf
    cd /usr/redis/src
    ./redis-server ../redis.conf
    
     
    vim /usr/redis/redis.conf 修改内容
    daemonize yes                   #以后台进程运行
    cluster-enabled yes             #开启集群
    cluster-config-file nodes.conf  #集群配置文件
    cluster-node-timeout  15000     #超时时间
    appendonly  yes                 #开启AOF模式        
    
     
  5. 创建Cluster集群
    #在r1节点上执行下面的指令
    cd /usr/redis/src
    mkdir -p ../cluster
    cp redis-trib.rb ../cluster/
    cd ../cluster
    #创建Cluster集群
    ./redis-trib.rb create --replicas 1 172.19.0.2:6379 172.19.0.3:6379 172.19.0.4:6379 172.19.0.5:6379 172.19.0.6:6379 172.19.0.7:6379
    
     

打包部署后端项目

  1. 进入人人开源后端项目,执行打包(修改配置文件,更改端口,打包三次生成三个JAR文件)
    mvn clean install -Dmaven.test.skip=true
    
     
  2. 安装Java镜像
    docker pull java
    
     
  3. 创建3节点Java容器
    #创建数据卷,上传JAR文件
    docker volume create j1
    #启动容器
    docker run -it -d --name j1 -v j1:/home/soft --net=host java
    #进入j1容器
    docker exec -it j1 bash
    #启动Java项目
    nohup java -jar /home/soft/renren-fast.jar
    
    #创建数据卷,上传JAR文件
    docker volume create j2
    #启动容器
    docker run -it -d --name j2 -v j2:/home/soft --net=host java
    #进入j1容器
    docker exec -it j2 bash
    #启动Java项目
    nohup java -jar /home/soft/renren-fast.jar
    
    #创建数据卷,上传JAR文件
    docker volume create j3
    #启动容器
    docker run -it -d --name j3 -v j3:/home/soft --net=host java
    #进入j1容器
    docker exec -it j3 bash
    #启动Java项目
    nohup java -jar /home/soft/renren-fast.jar
    
     
  4. 安装Nginx镜像
    docker pull nginx
    
     
  5. 创建Nginx容器,配置负载均衡

    宿主机上/home/n1/nginx.conf配置文件内容如下:

    user  nginx; worker_processes  1; error_log  /var/log/nginx/error.log warn; pid  /var/run/nginx.pid; events {  worker_connections  1024; } http {  include  /etc/nginx/mime.types;  default_type  application/octet-stream;  log_format  main '$remote_addr - $remote_user [$time_local] "$request" '  '$status $body_bytes_sent "$http_referer" '  '"$http_user_agent" "$http_x_forwarded_for"';  access_log  /var/log/nginx/access.log main;  sendfile  on;  #tcp_nopush on;  keepalive_timeout  65;  #gzip on; proxy_redirect  off; proxy_set_header  Host $host; proxy_set_header  X-Real-IP $remote_addr; proxy_set_header  X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size  10m; client_body_buffer_size  128k; proxy_connect_timeout  5s; proxy_send_timeout  5s; proxy_read_timeout  5s; proxy_buffer_size  4k; proxy_buffers  4 32k; proxy_busy_buffers_size  64k; proxy_temp_file_write_size 64k; upstream tomcat {  server 192.168.99.104:6001;  server 192.168.99.104:6002;  server 192.168.99.104:6003; } server {  listen  6101;  server_name  192.168.99.104;  location / {  proxy_pass  http://tomcat;  index  index.html index.htm; } } } 
     
     

    创建第1个Nginx节点

    docker run -it -d --name n1 -v /home/n1/nginx.conf:/etc/nginx/nginx.conf --net=host --privileged nginx
    
    
     

    宿主机上/home/n2/nginx.conf配置文件内容如下:

    user  nginx; worker_processes  1; error_log  /var/log/nginx/error.log warn; pid  /var/run/nginx.pid; events {  worker_connections  1024; } http {  include  /etc/nginx/mime.types;  default_type  application/octet-stream;  log_format  main '$remote_addr - $remote_user [$time_local] "$request" '  '$status $body_bytes_sent "$http_referer" '  '"$http_user_agent" "$http_x_forwarded_for"';  access_log  /var/log/nginx/access.log main;  sendfile  on;  #tcp_nopush on;  keepalive_timeout  65;  #gzip on; proxy_redirect  off; proxy_set_header  Host $host; proxy_set_header  X-Real-IP $remote_addr; proxy_set_header  X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size  10m; client_body_buffer_size  128k; proxy_connect_timeout  5s; proxy_send_timeout  5s; proxy_read_timeout  5s; proxy_buffer_size  4k; proxy_buffers  4 32k; proxy_busy_buffers_size  64k; proxy_temp_file_write_size 64k; upstream tomcat {  server 192.168.99.104:6001;  server 192.168.99.104:6002;  server 192.168.99.104:6003; } server {  listen  6102;  server_name  192.168.99.104;  location / {  proxy_pass  http://tomcat;  index  index.html index.htm; } } } 
     

    创建第2个Nginx节点

    docker run -it -d --name n2 -v /home/n2/nginx.conf:/etc/nginx/nginx.conf --net=host --privileged nginx
    
     
  6. 在Nginx容器安装Keepalived
    #进入n1节点
    docker exec -it n1 bash
    #更新软件包
    apt-get update
    #安装VIM
    apt-get install vim
    #安装Keepalived
    apt-get install keepalived
    #编辑Keepalived配置文件(如下)
    vim /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    
     
    vrrp_instance VI_1 {
       state MASTER
       interface ens33
       virtual_router_id 51
       priority 100
       advert_int 1
       authentication {
           auth_type PASS
           auth_pass 123456
       }
       virtual_ipaddress {
           192.168.99.151
       }
    }
    virtual_server 192.168.99.151 6201 {
       delay_loop 3
       lb_algo rr
       lb_kind NAT
       persistence_timeout 50
       protocol TCP
       real_server 192.168.99.104 6101 {
           weight 1
       }
    }
    
     
    #进入n1节点
    docker exec -it n2 bash
    #更新软件包
    apt-get update
    #安装VIM
    apt-get install vim
    #安装Keepalived
    apt-get install keepalived
    #编辑Keepalived配置文件(如下)
    vim /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    
     
    vrrp_instance VI_1 {
       state MASTER
       interface ens33
       virtual_router_id 51
       priority 100
       advert_int 1
       authentication {
           auth_type PASS
           auth_pass 123456
       }
       virtual_ipaddress {
           192.168.99.151
       }
    }
    virtual_server 192.168.99.151 6201 {
       delay_loop 3
       lb_algo rr
       lb_kind NAT
       persistence_timeout 50
       protocol TCP
       real_server 192.168.99.104 6102 {
           weight 1
       }
    }
    
     

打包部署后端项目

  1. 在前端项目路径下执行打包指令
    npm run build
    
     
  2. build目录的文件拷贝到宿主机的/home/fn1/renren-vue、/home/fn2/renren-vue、/home/fn3/renren-vue的目录下面

     

  3. 创建3节点的Nginx,部署前端项目

    宿主机/home/fn1/nginx.conf的配置文件

    user  nginx;
    worker_processes  1;
    error_log  /var/log/nginx/error.log warn;
    pid        /var/run/nginx.pid;
    
    events {
       worker_connections  1024;
    }
    
    http {
       include       /etc/nginx/mime.types;
       default_type  application/octet-stream;
    
       log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                         '$status $body_bytes_sent "$http_referer" '
                         '"$http_user_agent" "$http_x_forwarded_for"';
    
       access_log  /var/log/nginx/access.log  main;
    
       sendfile        on;
       #tcp_nopush     on;
    
       keepalive_timeout  65;
    
       #gzip  on;
    
    proxy_redirect          off;
    proxy_set_header        Host $host;
    proxy_set_header        X-Real-IP $remote_addr;
    proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
    client_max_body_size    10m;
    client_body_buffer_size   128k;
    proxy_connect_timeout   5s;
    proxy_send_timeout      5s;
    proxy_read_timeout      5s;
    proxy_buffer_size        4k;
    proxy_buffers           4 32k;
    proxy_busy_buffers_size  64k;
    proxy_temp_file_write_size 64k;
    
    server {
        listen 6501;
        server_name  192.168.99.104;
        location  /  {
            root  /home/fn1/renren-vue;
            index  index.html;
        }
    }
    }
    
     
    #启动第fn1节点
    docker run -it -d --name fn1 -v /home/fn1/nginx.conf:/etc/nginx/nginx.conf -v /home/fn1/renren-vue:/home/fn1/renren-vue --privileged --net=host nginx
    
     

    宿主机/home/fn2/nginx.conf的配置文件

    user  nginx;
    worker_processes  1;
    error_log  /var/log/nginx/error.log warn;
    pid        /var/run/nginx.pid;
    
    events {
       worker_connections  1024;
    }
    
    http {
       include       /etc/nginx/mime.types;
       default_type  application/octet-stream;
    
       log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                         '$status $body_bytes_sent "$http_referer" '
                         '"$http_user_agent" "$http_x_forwarded_for"';
    
       access_log  /var/log/nginx/access.log  main;
    
       sendfile        on;
       #tcp_nopush     on;
    
       keepalive_timeout  65;
    
       #gzip  on;
    
    proxy_redirect          off;
    proxy_set_header        Host $host;
    proxy_set_header        X-Real-IP $remote_addr;
    proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
    client_max_body_size    10m;
    client_body_buffer_size   128k;
    proxy_connect_timeout   5s;
    proxy_send_timeout      5s;
    proxy_read_timeout      5s;
    proxy_buffer_size        4k;
    proxy_buffers           4 32k;
    proxy_busy_buffers_size  64k;
    proxy_temp_file_write_size 64k;
    
    server {
        listen 6502;
        server_name  192.168.99.104;
        location  /  {
            root  /home/fn2/renren-vue;
            index  index.html;
        }
    }
    }
    
     
    #启动第fn2节点
    docker run -it -d --name fn2 -v /home/fn2/nginx.conf:/etc/nginx/nginx.conf -v /home/fn2/renren-vue:/home/fn2/renren-vue --privileged --net=host nginx
    
    Shell

    宿主机/home/fn3/nginx.conf的配置文件

    user  nginx;
    worker_processes  1;
    error_log  /var/log/nginx/error.log warn;
    pid        /var/run/nginx.pid;
    
    events {
       worker_connections  1024;
    }
    
    http {
       include       /etc/nginx/mime.types;
       default_type  application/octet-stream;
    
       log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                         '$status $body_bytes_sent "$http_referer" '
                         '"$http_user_agent" "$http_x_forwarded_for"';
    
       access_log  /var/log/nginx/access.log  main;
    
       sendfile        on;
       #tcp_nopush     on;
    
       keepalive_timeout  65;
    
       #gzip  on;
    
    proxy_redirect          off;
    proxy_set_header        Host $host;
    proxy_set_header        X-Real-IP $remote_addr;
    proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
    client_max_body_size    10m;
    client_body_buffer_size   128k;
    proxy_connect_timeout   5s;
    proxy_send_timeout      5s;
    proxy_read_timeout      5s;
    proxy_buffer_size        4k;
    proxy_buffers           4 32k;
    proxy_busy_buffers_size  64k;
    proxy_temp_file_write_size 64k;
    
    server {
        listen 6503;
        server_name  192.168.99.104;
        location  /  {
            root  /home/fn3/renren-vue;
            index  index.html;
        }
    }
    }
    
     

    启动fn3节点

    #启动第fn3节点
    docker run -it -d --name fn3 -v /home/fn3/nginx.conf:/etc/nginx/nginx.conf -v /home/fn3/renren-vue:/home/fn3/renren-vue --privileged --net=host nginx
    
     
  4. 配置负载均衡

    宿主机/home/ff1/nginx.conf配置文件

    user  nginx;
    worker_processes  1;
    error_log  /var/log/nginx/error.log warn;
    pid        /var/run/nginx.pid;
    
    events {
       worker_connections  1024;
    }
    
    http {
       include       /etc/nginx/mime.types;
       default_type  application/octet-stream;
    
       log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                         '$status $body_bytes_sent "$http_referer" '
                         '"$http_user_agent" "$http_x_forwarded_for"';
    
       access_log  /var/log/nginx/access.log  main;
    
       sendfile        on;
       #tcp_nopush     on;
    
       keepalive_timeout  65;
    
       #gzip  on;
    
    proxy_redirect          off;
    proxy_set_header        Host $host;
    proxy_set_header        X-Real-IP $remote_addr;
    proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
    client_max_body_size    10m;
    client_body_buffer_size   128k;
    proxy_connect_timeout   5s;
    proxy_send_timeout      5s;
    proxy_read_timeout      5s;
    proxy_buffer_size        4k;
    proxy_buffers           4 32k;
    proxy_busy_buffers_size  64k;
    proxy_temp_file_write_size 64k;
    
    upstream fn {
        server 192.168.99.104:6501;
        server 192.168.99.104:6502;
        server 192.168.99.104:6503;
    }
    server {
           listen       6601;
           server_name  192.168.99.104;
           location / {
               proxy_pass   http://fn;
               index  index.html index.htm;
           }
       }
    }
    
     
    #启动ff1节点
    docker run -it -d --name ff1 -v /home/ff1/nginx.conf:/etc/nginx/nginx.conf --net=host --privileged nginx
    
     

    宿主机/home/ff2/nginx.conf配置文件

    user  nginx;
    worker_processes  1;
    error_log  /var/log/nginx/error.log warn;
    pid        /var/run/nginx.pid;
    
    events {
       worker_connections  1024;
    }
    
    http {
       include       /etc/nginx/mime.types;
       default_type  application/octet-stream;
    
       log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                         '$status $body_bytes_sent "$http_referer" '
                         '"$http_user_agent" "$http_x_forwarded_for"';
    
       access_log  /var/log/nginx/access.log  main;
    
       sendfile        on;
       #tcp_nopush     on;
    
       keepalive_timeout  65;
    
       #gzip  on;
    
    proxy_redirect          off;
    proxy_set_header        Host $host;
    proxy_set_header        X-Real-IP $remote_addr;
    proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
    client_max_body_size    10m;
    client_body_buffer_size   128k;
    proxy_connect_timeout   5s;
    proxy_send_timeout      5s;
    proxy_read_timeout      5s;
    proxy_buffer_size        4k;
    proxy_buffers           4 32k;
    proxy_busy_buffers_size  64k;
    proxy_temp_file_write_size 64k;
    
    upstream fn {
        server 192.168.99.104:6501;
        server 192.168.99.104:6502;
        server 192.168.99.104:6503;
    }
    server {
           listen       6602;
           server_name  192.168.99.104;
           location / {
               proxy_pass   http://fn;
               index  index.html index.htm;
           }
       }
    }
    
     
    #启动ff2节点
    docker run -it -d --name ff2 -v /home/ff2/nginx.conf:/etc/nginx/nginx.conf --net=host --privileged nginx
    
     
  5. 配置双机热备
    #进入ff1节点
    docker exec -it ff1 bash
    #更新软件包
    apt-get update
    #安装VIM
    apt-get install vim
    #安装Keepalived
    apt-get install keepalived
    #编辑Keepalived配置文件(如下)
    vim /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    vrrp_instance VI_1 {
       state MASTER
       interface ens33
       virtual_router_id 52
       priority 100
       advert_int 1
       authentication {
           auth_type PASS
           auth_pass 123456
       }
       virtual_ipaddress {
           192.168.99.152
       }
    }
    virtual_server 192.168.99.151 6701 {
       delay_loop 3
       lb_algo rr
       lb_kind NAT
       persistence_timeout 50
       protocol TCP
       real_server 192.168.99.104 6601 {
           weight 1
       }
    }
    
     
    #进入ff1节点
    docker exec -it ff2 bash
    #更新软件包
    apt-get update
    #安装VIM
    apt-get install vim
    #安装Keepalived
    apt-get install keepalived
    #编辑Keepalived配置文件(如下)
    vim /etc/keepalived/keepalived.conf
    #启动Keepalived
    service keepalived start
    
     
    vrrp_instance VI_1 {
       state MASTER
       interface ens33
       virtual_router_id 52
       priority 100
       advert_int 1
       authentication {
           auth_type PASS
           auth_pass 123456
       }
       virtual_ipaddress {
           192.168.99.152
       }
    }
    virtual_server 192.168.99.151 6701 {
       delay_loop 3
       lb_algo rr
       lb_kind NAT
       persistence_timeout 50
       protocol TCP
       real_server 192.168.99.104 6602 {
           weight 1
       }
    }