I have a document with connection information to a device over a serial port. It specifies "full duplex" as the setting for flow control. Under Windows, I have the following options for setting up the flow control:
我有一个文档,通过串口向设备提供连接信息。它指定“全双工”作为流量控制的设置。在Windows下,我有以下选项来设置流控制:
- Xon/Xoff
- Hardware
- None
What is the equivalent of "full duplex" in the above list?
上面列表中的“全双工”相当于什么?
1 个解决方案
#1
"xon/xoff" is a synonym of "software flow control" (as opposed to "hardware flow control").
“xon / xoff”是“软件流控制”的同义词(与“硬件流控制”相反)。
"full duplex" means "in both directions"; theoretically you can enable software flow control or hardware flow control in one direction only (i.e. "half duplex"), or in both directions ("full duplex") ... so there's not enough information to answer the question.
“全双工”是指“双向”;从理论上讲,您可以仅在一个方向上启用软件流控制或硬件流控制(即“半双工”),或在两个方向上启用(“全双工”)......因此没有足够的信息来回答问题。
What kind of device is it? If I had to guess, my first guess would be "hardware" flow control, simply because "software flow control" is less compatible than "hardware flow control" with transferring binary data.
它是什么类型的设备?如果我不得不猜测,我的第一个猜测就是“硬件”流控制,因为“软件流控制”与传输二进制数据的“硬件流控制”不太相容。
#1
"xon/xoff" is a synonym of "software flow control" (as opposed to "hardware flow control").
“xon / xoff”是“软件流控制”的同义词(与“硬件流控制”相反)。
"full duplex" means "in both directions"; theoretically you can enable software flow control or hardware flow control in one direction only (i.e. "half duplex"), or in both directions ("full duplex") ... so there's not enough information to answer the question.
“全双工”是指“双向”;从理论上讲,您可以仅在一个方向上启用软件流控制或硬件流控制(即“半双工”),或在两个方向上启用(“全双工”)......因此没有足够的信息来回答问题。
What kind of device is it? If I had to guess, my first guess would be "hardware" flow control, simply because "software flow control" is less compatible than "hardware flow control" with transferring binary data.
它是什么类型的设备?如果我不得不猜测,我的第一个猜测就是“硬件”流控制,因为“软件流控制”与传输二进制数据的“硬件流控制”不太相容。