一.用户配置:
<H3C>system-view
[H3C]super password H3C 设置用户分级密码
[H3C]undo super password 删除用户分级密码
[H3C]localuser bigheap 123456 1 Web网管用户设置,1（缺省）为管理级用户,缺省admin,admin
[H3C]undo localuser bigheap 删除Web网管用户
[H3C]user-interface aux 0 只支持0
[H3C-Aux]idle-timeout 2 50 设置超时为2分50秒,若为0则表示不超时,默认为5分钟
[H3C-Aux]undo idle-timeout 恢复默认值
[H3C]user-interface vty 0 只支持0和1
[H3C-vty]idle-timeout 2 50 设置超时为2分50秒,若为0则表示不超时,默认为5分钟
[H3C-vty]undo idle-timeout 恢复默认值
[H3C-vty]set authentication password 123456 设置telnet密码,必须设置
[H3C-vty]undo set authentication password 取消密码
[H3C]display users 显示用户
[H3C]display user-interface 显示用户界面状态
二.系统IP配置:
[H3C]vlan 20
[H3C]management-vlan 20
[H3C]interface vlan-interface 20 创建并进入管理VLAN
[H3C]undo interface vlan-interface 20 删除管理VLAN接口
[H3C-Vlan-interface20]ip address 192.168.1.2 255.255.255.0 配置管理VLAN接口静态IP地址(缺省为192.168.0.234)
[H3C-Vlan-interface20]undo ip address 删除IP地址
[H3C-Vlan-interface20]ip gateway 192.168.1.1 指定缺省网关(默认无网关地址)
[H3C-Vlan-interface20]undo ip gateway
[H3C-Vlan-interface20]shutdown 关闭接口
[H3C-Vlan-interface20]undo shutdown 开启
[H3C]display ip 显示管理VLAN接口IP的相关信息
[H3C]display interface vlan-interface 20 查看管理VLAN的接口信息
<H3C>debugging ip 开启IP调试功能
<H3C>undo debugging ip
三.DHCP客户端配置:
[H3C-Vlan-interface20]ip address dhcp-alloc 管理VLAN接口通过DHCP方式获取IP地址
[H3C-Vlan-interface20]undo ip address dhcp-alloc 取消
[H3C]display dhcp 显示DHCP客户信息
<H3C>debugging dhcp-alloc 开启DHCP调试功能
<H3C>undo debugging dhcp-alloc
四.端口配置:
[H3C]interface Ethernet0/3
[H3C-Ethernet0/3]shutdown
[H3C-Ethernet0/3]speed 100 速率,可为10,100,1000和auto(缺省)
[H3C-Ethernet0/3]duplex full 双工,可为half,full和auto(缺省) 光口和汇聚后不能配置
[H3C-Ethernet0/3]flow-control 开启流控,默认为关闭
[H3C-Ethernet0/3]broadcast-suppression 20 设置抑制广播百分比为20%,可取5,10,20,100,缺省为100,同时组播和未知单播也受此影响
[H3C-Ethernet0/3]loopback internal 内环测试
[H3C-Ethernet0/3]loopback external 外环测试,需插接自环头,必须为全双工或者自协商模式
[H3C-Ethernet0/3]port link-type trunk 设置链路的类型为trunk,可为access(缺省),trunk
[H3C-Ethernet0/3]port trunk pvid vlan 20 设置20为该trunk的缺省VLAN,默认为1
(trunk线路两端的PVID必须一致)
[H3C-Ethernet0/3]port access vlan 20