1.什么是AQS?
AQS的核心思想是基于volatile int state这样的volatile变量，配合Unsafe工具对其原子性的操作来实现对当前锁状态进行修改。同步器内部依赖一个FIFO的双向队列来完成资源获取线程的排队工作。
2.同步器的应用
同步器主要使用方式是继承，子类通过继承同步器并实现它的抽象方法来管理同步状态，对同步状态的修改或者访问主要通过同步器提供的3个方法：
- getState() 获取当前的同步状态
- setState(int newState) 设置当前同步状态
- compareAndSetState(int expect,int update) 使用CAS设置当前状态，该方法能够保证状态设置的原子性。
同步器可以支持独占式的获取同步状态，也可以支持共享式的获取同步状态，这样可以方便实现不同类型的同步组件。
同步器也是实现锁的关键，在锁的实现中聚合同步器，利用同步器实现锁的语义。
3.AQS同步队列
同步器AQS内部的实现是依赖同步队列（一个FIFO的双向队列，其实就是数据结构双向链表）来完成同步状态的管理。
当前线程获取同步状态失败时，同步器AQS会将当前线程和等待状态等信息构造成为一个节点（node）加入到同步队列，同时会阻塞当前线程；
当同步状态释放的时候，会把首节点中的线程唤醒，使首节点的线程再次尝试获取同步状态。AQS是独占锁和共享锁的实现的父类。
4.AQS锁的类别：分为独占锁和共享锁两种。
- 独占锁：锁在一个时间点只能被一个线程占有。根据锁的获取机制，又分为“公平锁”和“非公平锁”。等待队列中按照FIFO的原则获取锁，等待时间越长的线程越先获取到锁，这就是公平的获取锁，即公平锁。而非公平锁，线程获取的锁的时候，无视等待队列直接获取锁。ReentrantLock和ReentrantReadWriteLock.Writelock是独占锁。
- 共享锁：同一个时候能够被多个线程获取的锁，能被共享的锁。JUC包中ReentrantReadWriteLock.ReadLock，CyclicBarrier，CountDownLatch和Semaphore都是共享锁。
JUC包中的锁的包括：Lock接口，ReadWriteLock接口；Condition条件，LockSupport阻塞原语。
AbstractOwnableSynchronizer/AbstractQueuedSynchronizer/AbstractQueuedLongSynchronizer三个抽象类，
ReentrantLock独占锁，ReentrantReadWriteLock读写锁。CountDownLatch，CyclicBarrier和Semaphore也是通过AQS来实现的。
下面是AQS和使用AQS实现的一些锁，以及通过AQS实现的一些工具类的架构图：
图 1.依赖AQS实现的锁和工具类
5.AQS同步器的结构：同步器拥有首节点（head）和尾节点（tail）。同步队列的基本结构如下：
图 1.同步队列的基本结构 compareAndSetTail(Node expect,Node update)
- 同步队列设置尾节点（未获取到锁的线程加入同步队列）: 同步器AQS中包含两个节点类型的引用：一个指向头结点的引用（head),一个指向尾节点的引用（tail），当一个线程成功的获取到锁（同步状态），其他线程无法获取到锁，而是被构造成节点（包含当前线程，等待状态）加入到同步队列中等待获取到锁的线程释放锁。这个加入队列的过程，必须要保证线程安全。否则如果多个线程的环境下，可能造成添加到队列等待的节点顺序错误，或者数量不对。因此同步器提供了CAS原子的设置尾节点的方法（保证一个未获取到同步状态的线程加入到同步队列后，下一个未获取的线程才能够加入）。 如下图，设置尾节点：
图 2.尾节点的设置 节点加入到同步队列
- 同步队列设置首节点（原头节点释放锁，唤醒后继节点）：同步队列遵循FIFO，头节点是获取锁（同步状态）成功的节点，头节点在释放同步状态的时候，会唤醒后继节点，而后继节点将会在获取锁（同步状态）成功时候将自己设置为头节点。设置头节点是由获取锁（同步状态）成功的线程来完成的，由于只有一个线程能够获取同步状态，则设置头节点的方法不需要CAS保证，只需要将头节点设置成为原首节点的后继节点 ，并断开原头结点的next引用。如下图，设置首节点：
图 3.首节点的设置
6.独占式的锁的获取：调用同步器的acquire(int arg)方法可以获取同步状态，该方法对中断不敏感，即线程获取同步状态失败后进入同步队列，后续对线程进行中断操作时，线程不会从同步队列中移除。
(1) 当前线程实现通过tryAcquire()方法尝试获取锁，获取成功的话直接返回，如果尝试失败的话，进入等待队列排队等待，可以保证线程安全（CAS）的获取同步状态。
(2) 如果尝试获取锁失败的话，构造同步节点（独占式的Node.EXCLUSIVE），通过addWaiter(Node node,int args)方法,将节点加入到同步队列的队列尾部。
(3) 最后调用acquireQueued(final Node node, int args)方法，使该节点以死循环的方式获取同步状态，如果获取不到，则阻塞节点中的线程。acquireQueued方法当前线程在死循环中获取同步状态，而只有前驱节点是头节点的时候才能尝试获取锁（同步状态）（ p == head && tryAcquire(arg)）。
原因是：1.头结点是成功获取同步状态的节点，而头结点的线程释放锁以后，将唤醒后继节点，后继节点线程被唤醒后要检查自己的前驱节点是否为头结点。
2.维护同步队列的FIFO原则，节点进入同步队列以后，就进入了一个自旋的过程，每个节点（后者说每个线程）都在自省的观察。
下图为节点自旋检查自己的前驱节点是否为头结点：
图 4 节点自旋获取同步状态
独占式的锁的获取源码： acquire方法源码如下
/**
* Acquires in exclusive(互斥) mode, ignoring（忽视） interrupts. Implemented
* by invoking at least once {@link #tryAcquire},
* returning on success. Otherwise the thread is queued（排队）, possibly
* repeatedly（反复的） blocking and unblocking, invoking {@link
* #tryAcquire} until success. This method can be used
* to implement method {@link Lock#lock}.
*
* @param arg the acquire argument. This value is conveyed（传达） to
* {@link #tryAcquire} but is otherwise uninterpreted and
* can represent anything you like.
*
* 独占式的获取同步状态
*
*/
public final void acquire(int arg) {
if (!tryAcquire(arg) && acquireQueued(addWaiter(Node.EXCLUSIVE), arg))
selfInterrupt();
}
尝试获取锁：tryAcquire方法：如果获取到了锁，tryAcquire返回true，反之，返回false。
//方法2：
protected final boolean tryAcquire(int acquires) {
// 获取当前线程
final Thread current = Thread.currentThread();
// 获取“独占锁”的状态，获取父类AQS的标志位
int c = getState();
//c == 0 意思是锁（同步状态）没有被任何线程所获取
//1.当前线程是否是同步队列中头结点Node,如果是的话，则获取该锁，设置锁的状态，并设置锁的拥有者为当前线程
if (c == 0) {
if (!hasQueuedPredecessors() && // 修改下状态为，这里的acquires的值是1，是写死的调用子类的lock的方法的时候传进来的，如果c == 0，compareAndSetState操作会更新成功为1.
compareAndSetState(0, acquires)) {
// 上面CAS操作更新成功为1，表示当前线程获取到了锁，因为将当前线程设置为AQS的一个变量中，代表这个线程拿走了锁。
setExclusiveOwnerThread(current);
return true;
}
}
//2.如果c不为0，即状态不为0，表示锁已经被拿走。
//因为ReetrantLock是可重入锁，是可以重复lock和unlock的，所以这里还要判断一次，获取锁的线程是否为当前请求锁的线程。
else if (current == getExclusiveOwnerThread()) {
//如果是，state继续加1，这里nextc的结果就会 > 1,这个判断表示获取到的锁的线程，还可以再获取锁，这里就是说的可重入的意思
int nextc = c + acquires;
if (nextc < 0)
throw new Error("Maximum lock count exceeded");
setState(nextc);
return true;
}
return false;
}
addWaiter方法的源码：回到aquire方法，如果尝试获取同步状态（锁）失败的话,则构造同步节点（独占式的Node.EXCLUSIVE），
通过addWaiter(Node node,int args)方法
将该节点加入到同步队列的队尾。
/**
* Creates and enqueues node for current thread and given mode.
*
* @param mode Node.EXCLUSIVE for exclusive, Node.SHARED for shared
* @return the new node
*
*
* 如果尝试获取同步状态失败的话,则构造同步节点（独占式的Node.EXCLUSIVE），通过addWaiter(Node node,int args)方法将该节点加入到同步队列的队尾。
*
*/
private Node addWaiter(Node mode) {
// 用当前线程够着一个Node对象，mode是一个表示Node类型的字段，或者说是这个节点是独占的还是共享的，或者说AQS的这个队列中，哪些节点是独占的，哪些节点是共享的。
Node node = new Node(Thread.currentThread(), mode);
// Try the fast path of enq; backup to full enq on failure
Node pred = tail;
//队列不为空的时候
if (pred != null) {
node.prev = pred;
// 确保节点能够被线程安全的添加，使用CAS方法
// 尝试修改为节点为最新的节点，如果修改失败，意味着有并发，这个时候进入enq中的死循环，进行“自旋”的方式修改
if (compareAndSetTail(pred, node)) {
pred.next = node;
return node;
}
}
//进入自旋
enq(node);
return node;
}
enq方法的源码：同步器通过死循环的方式来保证节点的正确添加，在“死循环” 中通过CAS将节点设置成为尾节点之后，当前线程才能从该方法中返回，否则
当前线程不断的尝试设置。
enq方法将并发添加节点的请求通过CAS变得“串行化”了。
/**
* Inserts node into queue, initializing if necessary. See picture above.
* @param node the node to insert
* @return node's predecessor
*
* 同步器通过死循环的方式来保证节点的正确添加，在“死循环” 中通过CAS将节点设置成为尾节点之后，当前线程才能从该方法中返回，否则当前线程不断的尝试设置。
* enq方法将并发添加节点的请求通过CAS变得“串行化”了。
*
*/
private Node enq(final Node node) {
for (;;) {
Node t = tail;
if (t == null) { // Must initialize
if (compareAndSetHead(new Node()))
tail = head;
} else {
node.prev = t;
if (compareAndSetTail(t, node)) {
t.next = node;
return t;
}
}
}
}
acquireQueued方法:在队列中的线程获取锁的过程：
/**
* Acquires in exclusive uninterruptible mode for thread already in
* queue. Used by condition wait methods as well as acquire.
*
* @param node the node
* @param arg the acquire argument
* @return {@code true} if interrupted while waiting
*
* acquireQueued方法当前线程在死循环中获取同步状态，而只有前驱节点是头节点才能尝试获取同步状态（锁）（ p == head && tryAcquire(arg)）
* 原因是:1.头结点是成功获取同步状态（锁）的节点，而头节点的线程释放了同步状态以后，将会唤醒其后继节点，后继节点的线程被唤醒后要检查自己的前驱节点是否为头结点。
* 2.维护同步队列的FIFO原则，节点进入同步队列之后，就进入了一个自旋的过程，每个节点（或者说是每个线程）都在自省的观察。
*
*/
final boolean acquireQueued(final Node node, int arg) {
boolean failed = true;
try {
boolean interrupted = false;
//死循环检查（自旋检查）当前节点的前驱节点是否为头结点，才能获取锁
for (;;) {
// 获取节点的前驱节点
final Node p = node.predecessor();
if (p == head && tryAcquire(arg)) {//节点中的线程循环的检查，自己的前驱节点是否为头节点
//将当前节点设置为头结点，移除之前的头节点
setHead(node);
p.next = null; // help GC
failed = false;
return interrupted;
}
// 否则检查前一个节点的状态，看当前获取锁失败的线程是否要挂起
if (shouldParkAfterFailedAcquire(p, node) &&
//如果需要挂起，借助JUC包下面的LockSupport类的静态方法park挂起当前线程，直到被唤醒
parkAndCheckInterrupt())
interrupted = true;
}
} finally {
//如果有异常
if (failed)
//取消请求，将当前节点从队列中移除
cancelAcquire(node);
}
}
独占式的获取同步状态的流程如下：
图5 独占式的获取同步状态的流程
7.独占锁的释放：下面直接看源码：
/*
1. unlock():unlock()是解锁函数，它是通过AQS的release()函数来实现的。
* 在这里，“1”的含义和“获取锁的函数acquire(1)的含义”一样，它是设置“释放锁的状态”的参数。
* 由于“公平锁”是可重入的，所以对于同一个线程，每释放锁一次，锁的状态-1。 unlock()在ReentrantLock.java中实现的，源码如下：
*/
public void unlock() {
sync.release(1);
}
release()会调用tryRelease方法尝试释放当前线程持有的锁（同步状态），成功的话唤醒后继线程，并返回true，否则直接返回false
/**
* Releases in exclusive mode. Implemented by unblocking one or
* more threads if {@link #tryRelease} returns true.
* This method can be used to implement method {@link Lock#unlock}.
*
* @param arg the release argument. This value is conveyed to
* {@link #tryRelease} but is otherwise uninterpreted and
* can represent anything you like.
* @return the value returned from {@link #tryRelease}
*
*
*
*/
public final boolean release(int arg) {
if (tryRelease(arg)) {
Node h = head;
if (h != null && h.waitStatus != 0)
unparkSuccessor(h);
return true;
}
return false;
}
// tryRelease() 尝试释放当前线程的同步状态（锁）
protected final boolean tryRelease(int releases) {
//c为释放后的同步状态
int c = getState() - releases;
//判断当前释放锁的线程是否为获取到锁（同步状态）的线程，不是抛出异常（非法监视器状态异常）
if (Thread.currentThread() != getExclusiveOwnerThread())
throw new IllegalMonitorStateException();
boolean free = false;
//如果锁（同步状态）已经被当前线程彻底释放，则设置锁的持有者为null，同步状态（锁）变的可获取
if (c == 0) {
free = true;
setExclusiveOwnerThread(null);
}
setState(c);
return free;
}
释放锁成功后，找到AQS的头结点，并唤醒它即可：
// 4. 唤醒头结点的后继节点
private void unparkSuccessor(Node node) {
//获取头结点（线程）的状态
int ws = node.waitStatus;
//如果状态<0,设置当前线程对应的锁的状态为0
if (ws < 0)
compareAndSetWaitStatus(node, ws, 0);
Node s = node.next;
//解释:Thread to unpark is held in successor, which is normally just the next node.
//But if cancelled or apparently（显然） null, traverse backwards(向后遍历) from tail to find the actual（实际的） non-cancelled successor（前继节点）.
//从队列尾部开始往前去找最前面的一个waitStatus小于0的节点。
if (s == null || s.waitStatus > 0) {
s = null;
for (Node t = tail; t != null && t != node; t = t.prev)
if (t.waitStatus <= 0)
s = t;
}
//唤醒后继节点对应的线程
if (s != null)
LockSupport.unpark(s.thread);
}
上面说的是ReentrantLock的公平锁获取和释放的AQS的源码，唯独还剩下一个非公平锁NonfairSync没说，其实，它和公平锁的唯一区别就是获取锁的方式不同，公平锁是按前后顺序一次获取锁，非公平锁是抢占式的获取锁，那ReentrantLock中的非公平锁NonfairSync是怎么实现的呢？
/**
* Sync object for non-fair locks
*/
static final class NonfairSync extends Sync {
private static final long serialVersionUID = 7316153563782823691L; /**
* Performs lock. Try immediate barge, backing up to normal
* acquire on failure.
*/
final void lock() {
if (compareAndSetState(0, 1))
setExclusiveOwnerThread(Thread.currentThread());
else
acquire(1);
} protected final boolean tryAcquire(int acquires) {
return nonfairTryAcquire(acquires);
}
}
非公平锁的lock的时候多了上面加粗的代码：在lock的时候先直接用cas判断state变量是否为0（尝试获取锁），成功的话更新成1，表示当前线程获取到了锁，不需要在排队，从而直接抢占的目的。而对于公平锁的lock方法是一开始就走AQS的双向队列排队获取锁。更详细的关于ReentrantLock的实现请看后面写的一篇文章：http://www.cnblogs.com/200911/p/6035765.html
总结:在获取同步状态的时候，同步器维护一个同步队列，获取失败的线程会被加入到队列中并在队列中自旋;移除队列（或停止自旋）的条件是前驱节点为头结点并且获取到了同步状态。在释放同步状态时，同步器调用tryRelease(int args)方法释放同步状态，然后唤醒头结点的后继节点。AQS的实现思路其实并不复杂，用一句话准确的描述的话，其实就是使用标志状态位status（volatile int state）和 一个双向队列的入队和出队来实现。AQS维护一个线程何时访问的状态，它只是对状态负责，而这个状态的含义，子类可以自己去定义。
自己注释的AQS的源码：如下：
public class AbstractQueuedSynchronizerTest {
/**
*
* (AQS节点的定义，同步队列的节点定义)
*
* <p>
* 修改历史: <br>
* 修改日期 修改人员 版本 修改内容<br>
* -------------------------------------------------<br>
* 2016年7月4日 上午10:26:38 user 1.0 初始化创建<br>
* </p>
*
* @author Peng.Li
* @version 1.0
* @since JDK1.7
*/
static final class Node {
/** Marker to indicate a node is waiting in shared mode */
static final Node SHARED = new Node();
/** Marker to indicate a node is waiting in exclusive mode
*
* */
static final Node EXCLUSIVE = null;
/** waitStatus value to indicate thread has cancelled
* 在同步队列中等待的线程等待超时或者被中断，需要从同步队列中取消等待
* */
static final int CANCELLED = 1;
/** waitStatus value to indicate successor's thread needs unparking(唤醒)
* 后继节点的线程处于等待状态，而当前的节点如果释放了同步状态或者被取消，将会通知后继节点，使后继节点的线程得以运行。
**/
static final int SIGNAL = -1;
/** waitStatus value to indicate thread is waiting on condition
* 节点在等待队列中，节点的线程等待在Condition上，当其他线程对Condition调用了signal()方法后，该节点会从等待队列中转移到同步队列中，加入到同步状态的获取中
**/
static final int CONDITION = -2;
/**
* waitStatus value to indicate the next acquireShared should
* unconditionally（无条件的） propagate（传播）
*
* 表示下一次共享式同步状态获取将会被无条件地传播下去
*/
static final int PROPAGATE = -3;
/**
* Status field, taking on only the values:
* SIGNAL: The successor of this node is (or will soon be)
* blocked (via park), so the current node must
* unpark its successor when it releases or
* cancels. To avoid races, acquire methods must
* first indicate they need a signal,
* then retry the atomic acquire, and then,
* on failure, block.
* CANCELLED: This node is cancelled due to timeout or interrupt.
* Nodes never leave this state. In particular,
* a thread with cancelled node never again blocks.
* CONDITION: This node is currently on a condition queue.
* It will not be used as a sync queue node
* until transferred, at which time the status
* will be set to 0. (Use of this value here has
* nothing to do with the other uses of the
* field, but simplifies mechanics.)
* PROPAGATE: A releaseShared should be propagated（传播） to other
* nodes. This is set (for head node only) in
* doReleaseShared to ensure propagation
* continues, even if other operations have
* since intervened（干涉）.
* 0: None of the above
*
* The values are arranged numerically to simplify use.
* Non-negative values mean that a node doesn't need to
* signal. So, most code doesn't need to check for particular
* values, just for sign.
*
* The field is initialized to 0 for normal sync nodes, and
* CONDITION for condition nodes. It is modified using CAS
* (or when possible, unconditional volatile writes).
*
* 使用CAS更改状态，volatile保证线程可见性，即被一个线程修改后，状态会立马让其他线程可见。
*
*/
volatile int waitStatus;
/**
* Link to predecessor node that current node/thread relies on
* for checking waitStatus. Assigned during enqueing（入队）, and nulled
* out (for sake of GC) only upon dequeuing. Also, upon
* cancellation of a predecessor, we short-circuit while
* finding a non-cancelled one, which will always exist
* because the head node is never cancelled: A node becomes
* head only as a result of successful acquire. A
* cancelled thread never succeeds in acquiring, and a thread only
* cancels itself, not any other node.
*
* 前驱节点，当前节点加入到同步队列中被设置
*/
volatile Node prev;
/**
* Link to the successor node that the current node/thread
* unparks upon release. Assigned during enqueuing, adjusted
* when bypassing cancelled predecessors, and nulled out (for
* sake of GC) when dequeued. The enq operation does not
* assign next field of a predecessor until after attachment,
* so seeing a null next field does not necessarily mean that
* node is at end of queue. However, if a next field appears
* to be null, we can scan prev's from the tail to
* double-check. The next field of cancelled nodes is set to
* point to the node itself instead of null, to make life
* easier for isOnSyncQueue.
*
* 后继节点
*/
volatile Node next;
/**
* The thread that enqueued this node. Initialized on
* construction and nulled out after use.
*
* 获取同步状态的线程
*/
volatile Thread thread;
/**
* Link to next node waiting on condition, or the special
* value SHARED. Because condition queues are accessed only
* when holding in exclusive(独有的) mode, we just need a simple
* linked queue to hold nodes while they are waiting on
* conditions. They are then transferred（移动到） to the queue（同步队列） to
* re-acquire. And because conditions can only be exclusive,
* we save a field by using special value to indicate shared
* mode.
*
* 等待队列中的后继节点，如果当前节点是共享的，那么这个字段是一个SHARED常量，
* 也就是说节点类型(独占和共享)和等待队列中的后继节点共用同一个字段。
*/
Node nextWaiter;
/**
* Returns true if node is waiting in shared mode
*/
final boolean isShared() {
return nextWaiter == SHARED;
}
/**
* Returns previous node, or throws NullPointerException if null.
* Use when predecessor cannot be null. The null check could
* be elided, but is present to help the VM.
*
* @return the predecessor of this node
*/
final Node predecessor() throws NullPointerException {
Node p = prev;
if (p == null)
throw new NullPointerException();
else
return p;
}
Node() { // Used to establish initial head or SHARED marker
}
Node(Thread thread, Node mode) { // Used by addWaiter
this.nextWaiter = mode;
this.thread = thread;
}
Node(Thread thread, int waitStatus) { // Used by Condition
this.waitStatus = waitStatus;
this.thread = thread;
}
}
/**
* Head of the wait queue, lazily initialized. Except for (除...以外)
* initialization（初始化）, it is modified only via method setHead. Note:
* If head exists, its waitStatus is guaranteed not to be
* CANCELLED.（如果head引用已经存在，等待状态保证不会被取消）
*/
private transient volatile Node head;
/**
* Tail of the wait queue（等待队列）, lazily initialized. Modified only via
* method enq to add new wait node.
*/
private transient volatile Node tail;
/**
* The synchronization state.
* 同步状态，线程可见的，共享内存里面保存
*
*/
private volatile int state;
/**
* Returns the current value of synchronization state.
* This operation has memory semantics of a <tt>volatile</tt> read.
* @return current state value
*
* 得到同步状态的值
*
*/
protected final int getState() {
return state;
}
/**
* Sets the value of synchronization state.
* This operation has memory semantics of a <tt>volatile</tt> write.
* @param newState the new state value
*/
protected final void setState(int newState) {
state = newState;
}
/**
* Acquires in exclusive(互斥) mode, ignoring（忽视） interrupts. Implemented
* by invoking at least once {@link #tryAcquire},
* returning on success. Otherwise the thread is queued（排队）, possibly
* repeatedly（反复的） blocking and unblocking, invoking {@link
* #tryAcquire} until success. This method can be used
* to implement method {@link Lock#lock}.
*
* @param arg the acquire argument. This value is conveyed（传达） to
* {@link #tryAcquire} but is otherwise uninterpreted and
* can represent anything you like.
*
* 独占式的获取同步状态
*
*/
public final void acquire(int arg) {
if (!tryAcquire(arg) && acquireQueued(addWaiter(Node.EXCLUSIVE), arg))
selfInterrupt();
}
protected boolean tryAcquire(int arg) {
throw new UnsupportedOperationException();
}
/**
* Creates and enqueues node for current thread and given mode.
*
* @param mode Node.EXCLUSIVE for exclusive, Node.SHARED for shared
* @return the new node
*
*
* 如果尝试获取同步状态失败的话,则构造同步节点（独占式的Node.EXCLUSIVE），通过 addWaiter(Node node,int args)方法将该节点加入到同步队列的队尾。
*
*/
private Node addWaiter(Node mode) {
Node node = new Node(Thread.currentThread(), mode);
// Try the fast path of enq; backup to full enq on failure
Node pred = tail;
if (pred != null) {
node.prev = pred;
// 确保节点能够被安全的添加
if (compareAndSetTail(pred, node)) {
pred.next = node;
return node;
}
}
enq(node);
return node;
}
/**
* Convenience method to interrupt current thread.
* 分析：如果在acquireQueued()中，当前线程被中断过，则执行selfInterrupt()；否则不会执行。
* 线程在阻塞状态被“中断唤醒”而获取CPU的执行权；但是该线程前面还有其他等待锁的线程，根据公平性原则，该线程仍然无法获取到锁，他会再次阻塞。
* 直到该线程被他前面等待锁的线程唤醒；线程才会获取锁。该线程“成功获取锁并真正执行起来之前”，他的中断会被忽略并且中断标记会被清除，因为在parkAndCheckInterrupt()中，
* 我们线程的中断状态时调用了Thread.interrupted()，这个函数在返回中断状态之后，还会清除中断状态，正因为清除了中断状态，所以在selfInterrupt重新产生一个中断。
*
*
* 当前线程自己产生一个中断
*/
private static void selfInterrupt() {
Thread.currentThread().interrupt();
}
/**
* Acquires in exclusive uninterruptible mode for thread already in
* queue. Used by condition wait methods as well as acquire.
*
* @param node the node
* @param arg the acquire argument
* @return {@code true} if interrupted while waiting
*
* acquireQueued方法当前线程在死循环中获取同步状态，而只有前驱节点是头节点才能尝试获取同步状态（ p == head && tryAcquire(arg)）
* 原因是:1.头结点是成功获取同步状态的节点，而头节点的线程释放了同步状态以后，将会唤醒其后继节点，后继节点的线程被唤醒后要检查自己的前驱节点是否为头结点。
* 2.维护同步队列的FIFO原则，节点进入同步队列之后，就进入了一个自旋的过程，每个节点（或者说是每个线程）都在自省的观察。
*
*/
final boolean acquireQueued(final Node node, int arg) {
boolean failed = true;
try {
boolean interrupted = false;
for (;;) {
final Node p = node.predecessor();
if (p == head && tryAcquire(arg)) {
setHead(node);
p.next = null; // help GC
failed = false;
return interrupted;
}
if (shouldParkAfterFailedAcquire(p, node) && parkAndCheckInterrupt())
interrupted = true;
}
} finally {
if (failed)
cancelAcquire(node);
}
}
/**
* Inserts node into queue, initializing if necessary. See picture above.
* @param node the node to insert
* @return node's predecessor
*
* 同步器通过死循环的方式来保证节点的正确添加，在“死循环” 中通过CAS将节点设置成为尾节点之后，当前线程才能从该方法中返回，否则当前线程不断的尝试设置。
* enq方法将并发添加节点的请求通过CAS变得“串行化”了。
*
*/
private Node enq(final Node node) {
for (;;) {
Node t = tail;
if (t == null) { // Must initialize
if (compareAndSetHead(new Node()))
tail = head;
} else {
node.prev = t;
if (compareAndSetTail(t, node)) {
t.next = node;
return t;
}
}
}
}
/**
* Convenience method to park and then check if interrupted
*
* @return {@code true} if interrupted
*
* 阻塞当前线程
*
*/
private final boolean parkAndCheckInterrupt() {
// 阻塞当前线程
LockSupport.park(this);
// 线程被唤醒之后的中断状态
return Thread.interrupted();
}
/**
* Releases in exclusive mode. Implemented by unblocking one or
* more threads if {@link #tryRelease} returns true.
* This method can be used to implement method {@link Lock#unlock}.
*
* @param arg the release argument. This value is conveyed to
* {@link #tryRelease} but is otherwise uninterpreted and
* can represent anything you like.
* @return the value returned from {@link #tryRelease}
*
* 释放公平锁
*
*/
public final boolean release(int arg) {
if (tryRelease(arg)) {
Node h = head;
if (h != null && h.waitStatus != 0)
unparkSuccessor(h);
return true;
}
return false;
}
/**
* Attempts to set the state to reflect a release in exclusive
* mode.
*
* <p>This method is always invoked by the thread performing release.
*
* <p>The default implementation throws
* {@link UnsupportedOperationException}.
*
* @param arg the release argument. This value is always the one
* passed to a release method, or the current state value upon
* entry to a condition wait. The value is otherwise
* uninterpreted and can represent anything you like.
* @return {@code true} if this object is now in a fully released
* state, so that any waiting threads may attempt to acquire;
* and {@code false} otherwise.
* @throws IllegalMonitorStateException if releasing would place this
* synchronizer in an illegal state. This exception must be
* thrown in a consistent fashion for synchronization to work
* correctly.
* @throws UnsupportedOperationException if exclusive mode is not supported
*/
protected boolean tryRelease(int arg) {
throw new UnsupportedOperationException();
}
/**
* Checks and updates status for a node that failed to acquire.
* Returns true if thread should block. This is the main signal
* control in all acquire loops. Requires that pred == node.prev
*
* @param pred node's predecessor holding status
* @param node the node
* @return {@code true} if thread should block
* 返回当前线程是否应该阻塞
*
* 说明：
(01) 关于waitStatus请参考下表(中扩号内为waitStatus的值)，更多关于waitStatus的内容，可以参考前面的Node类的介绍。
CANCELLED[1] -- 当前线程已被取消
SIGNAL[-1] -- “当前线程的后继线程需要被unpark(唤醒)”。一般发生情况是：当前线程的后继线程处于阻塞状态，而当前线程被release或cancel掉，因此需要唤醒当前线程的后继线程。
CONDITION[-2] -- 当前线程(处在Condition休眠状态)在等待Condition唤醒
PROPAGATE[-3] -- (共享锁)其它线程获取到“共享锁”
[0] -- 当前线程不属于上面的任何一种状态。
(02) shouldParkAfterFailedAcquire()通过以下规则，判断“当前线程”是否需要被阻塞。
规则1：如果前继节点状态为SIGNAL，表明当前节点需要被unpark(唤醒)，此时则返回true。
规则2：如果前继节点状态为CANCELLED(ws>0)，说明前继节点已经被取消，则通过先前回溯找到一个有效(非CANCELLED状态)的节点，并返回false。
规则3：如果前继节点状态为非SIGNAL、非CANCELLED，则设置前继的状态为SIGNAL，并返回false。
*
*/
private static boolean shouldParkAfterFailedAcquire(Node pred, Node node) {
// 前驱节点的状态
int ws = pred.waitStatus;
// 如果前驱节点是SIGNAL状态，则意味着当前线程需要unpark唤醒，此时返回true
if (ws == Node.SIGNAL)
/*
* This node has already set status asking a release to signal it, so it can safely park.
*/
return true;
// 如果前继节点是取消的状态，则设置当前节点的“当前前继节点为”原节点的前继节点
if (ws > 0) {
/*
* Predecessor was cancelled. Skip over predecessors and indicate retry.
*/
do {
node.prev = pred = pred.prev;
} while (pred.waitStatus > 0);
pred.next = node;
} else {
/*
* waitStatus must be 0 or PROPAGATE. Indicate that we need a signal, but don't park yet. Caller will need to retry to make sure
* it cannot acquire before parking.
*/
compareAndSetWaitStatus(pred, ws, Node.SIGNAL);
}
return false;
}
/**
* Cancels an ongoing attempt to acquire.
*
* @param node the node
*/
private void cancelAcquire(Node node) {
// Ignore if node doesn't exist
if (node == null)
return;
node.thread = null;
// Skip cancelled predecessors
Node pred = node.prev;
while (pred.waitStatus > 0)
node.prev = pred = pred.prev;
// predNext is the apparent node to unsplice. CASes below will
// fail if not, in which case, we lost race vs another cancel
// or signal, so no further action is necessary.
Node predNext = pred.next;
// Can use unconditional write instead of CAS here.
// After this atomic step, other Nodes can skip past us.
// Before, we are free of interference from other threads.
node.waitStatus = Node.CANCELLED;
// If we are the tail, remove ourselves.
if (node == tail && compareAndSetTail(node, pred)) {
compareAndSetNext(pred, predNext, null);
} else {
// If successor needs signal, try to set pred's next-link
// so it will get one. Otherwise wake it up to propagate.
int ws;
if (pred != head && ((ws = pred.waitStatus) == Node.SIGNAL || (ws <= 0 && compareAndSetWaitStatus(pred, ws, Node.SIGNAL)))
&& pred.thread != null) {
Node next = node.next;
if (next != null && next.waitStatus <= 0)
compareAndSetNext(pred, predNext, next);
} else {
unparkSuccessor(node);
}
node.next = node; // help GC
}
}
/**
* Wakes up node's successor, if one exists.
*
* @param node the node
*/
private void unparkSuccessor(Node node) {
/*
* If status is negative (i.e., possibly needing signal) try to clear in anticipation of signalling. It is OK if this fails or if
* status is changed by waiting thread.
*/
int ws = node.waitStatus;
if (ws < 0)
compareAndSetWaitStatus(node, ws, 0);
/*
* Thread to unpark is held in successor, which is normally just the next node. But if cancelled or apparently null, traverse
* backwards from tail to find the actual non-cancelled successor.
*/
Node s = node.next;
if (s == null || s.waitStatus > 0) {
s = null;
for (Node t = tail; t != null && t != node; t = t.prev)
if (t.waitStatus <= 0)
s = t;
}
if (s != null)
LockSupport.unpark(s.thread);
}
/**
* Sets head of queue to be node, thus dequeuing. Called only by
* acquire methods. Also nulls out unused fields for sake of GC
* and to suppress unnecessary signals and traversals.
*
* @param node the node
*/
private void setHead(Node node) {
head = node;
node.thread = null;
node.prev = null;
}
/**
* Atomically sets synchronization state to the given updated
* value if the current state value equals the expected value.
* This operation has memory semantics of a <tt>volatile</tt> read
* and write.
*
* @param expect the expected value
* @param update the new value
* @return true if successful. False return indicates that the actual
* value was not equal to the expected value.
*/
protected final boolean compareAndSetState(int expect, int update) {
// See below for intrinsics setup to support this
return unsafe.compareAndSwapInt(this, stateOffset, expect, update);
}
/**
* CAS waitStatus field of a node.
*/
private static final boolean compareAndSetWaitStatus(Node node, int expect, int update) {
return unsafe.compareAndSwapInt(node, waitStatusOffset, expect, update);
}
/**
* CAS next field of a node.
*/
private static final boolean compareAndSetNext(Node node, Node expect, Node update) {
return unsafe.compareAndSwapObject(node, nextOffset, expect, update);
}
/**
* CAS tail field. Used only by enq.
*/
private final boolean compareAndSetTail(Node expect, Node update) {
return unsafe.compareAndSwapObject(this, tailOffset, expect, update);
}
/**
* CAS head field. Used only by enq.
*/
private final boolean compareAndSetHead(Node update) {
return unsafe.compareAndSwapObject(this, headOffset, null, update);
}
/**
* Setup to support compareAndSet. We need to natively implement
* this here: For the sake of permitting future enhancements, we
* cannot explicitly subclass AtomicInteger, which would be
* efficient and useful otherwise. So, as the lesser of evils, we
* natively implement using hotspot intrinsics（编译器内部函数） API. And while we
* are at it, we do the same for other CASable fields (which could
* otherwise be done with atomic field updaters).
*/
private static final Unsafe unsafe = Unsafe.getUnsafe();
private static final long stateOffset;
private static final long headOffset;
private static final long tailOffset;
private static final long waitStatusOffset;
private static final long nextOffset;
static {
try {
stateOffset = unsafe.objectFieldOffset(AbstractQueuedSynchronizer.class.getDeclaredField("state"));
headOffset = unsafe.objectFieldOffset(AbstractQueuedSynchronizer.class.getDeclaredField("head"));
tailOffset = unsafe.objectFieldOffset(AbstractQueuedSynchronizer.class.getDeclaredField("tail"));
waitStatusOffset = unsafe.objectFieldOffset(Node.class.getDeclaredField("waitStatus"));
nextOffset = unsafe.objectFieldOffset(Node.class.getDeclaredField("next"));
} catch (Exception ex) {
throw new Error(ex);
}
}
}
AbstractOwnableSynchronizer的源码如下：
package concurrentMy.aqs; /**
*
* (设置和获取锁的持有者线程)
*
* <p>
* 修改历史: <br>
* 修改日期 修改人员 版本 修改内容<br>
* -------------------------------------------------<br>
* 2016年7月5日 下午3:42:37 user 1.0 初始化创建<br>
* </p>
*
* @author Peng.Li
* @version 1.0
* @since JDK1.7
*/
public abstract class AbstractOwnableSynchronizerTest implements java.io.Serializable { /** Use serial ID even though all fields transient. */
private static final long serialVersionUID = 3737899427754241961L; /**
* Empty constructor for use by subclasses.
*/
protected AbstractOwnableSynchronizerTest() {
} /**
* The current owner of exclusive mode synchronization.
*
* 加 transient 表示exclusiveOwnerThread不能被串行化，不会被作为序列化的一部分
*
* 锁的持有线程
*/
private transient Thread exclusiveOwnerThread; /**
* Sets the thread that currently owns exclusive access. A
* <tt>null</tt> argument indicates that no thread owns access.
* This method does not otherwise impose any synchronization or
* <tt>volatile</tt> field accesses.
*
* protected final来修饰，表示子类可以使用这个方法，但是不能重载这个方法，也就是不能修改这个方法
*/
protected final void setExclusiveOwnerThread(Thread t) {
exclusiveOwnerThread = t;
} /**
* Returns the thread last set by
* <tt>setExclusiveOwnerThread</tt>, or <tt>null</tt> if never
* set. This method does not otherwise impose any synchronization
* or <tt>volatile</tt> field accesses.
* @return the owner thread
*/
protected final Thread getExclusiveOwnerThread() {
return exclusiveOwnerThread;
}
}
参考文章:
1.Doug Lea的论文: http://gee.cs.oswego.edu/dl/papers/aqs.pdf
2. 深度解析Java 8：JDK1.8 AbstractQueuedSynchronizer的实现分析（上）: http://www.infoq.com/cn/articles/jdk1.8-abstractqueuedsynchronizer
3. 深度解析Java 8：AbstractQueuedSynchronizer的实现分析（下）: http://www.infoq.com/cn/articles/java8-abstractqueuedsynchronizer
4. 深入浅出 Java Concurrency (7): 锁机制 part 2 AQS: http://www.blogjava.net/xylz/archive/2010/07/06/325390.html
5 AQS:http://www.cnblogs.com/leesf456/p/5350186.html
6.参考：https://tech.meituan.com/Java_Lock.html