iOS 学习笔记二【cocopods安装使用和安装过程中遇到的问题及解决办法】【20160725更新】

时间：2022-04-14 00:40:47

在osx 10.11之前cocopods问题不多，但是升级到11之后的版本，之前的cocopods大多用不了，需要重新安装，对于我这种使用测试版系统的技术狂来说，每次都需要重新安装很多东西，

当然，cocopods也避免不了安装很多次了。

对于新手来说，使用cocopods开发，还是节省了相当多的开发时间，以下便是cocopods安装和安装过程中遇到的问题及解决办法：

最新更新：2016年7月25日，新电脑新系统测试安装！

【注：可以直接从第二步开始安装】
2、出现以下问题，大家不要慌：
 boai:~ boai$ sudo gem install cocoapods

 ERROR:  Could not find a valid gem 'cocoapods' (>= ), here is why:

           Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)

 boai:~ boai$ sudo gem install cocoapods

 ERROR:  Could not find a valid gem 'cocoapods' (>= ), here is why:

           Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)

 boai:~ boai$ sudo gem update --system

 ERROR:  While executing gem ... (Gem::RemoteFetcher::FetchError)

     bad response Not Found  (http://ruby.taobao.org/specs.4.8.gz)

解决办法：

（1）先执行下面两行代码：

sudo gem sources -r https://rubygems.org

sudo gem sources -a http://rubygems.org

（2）执行过程如下：

 boai:~ boai$ sudo gem sources -r https://rubygems.org

 source https://rubygems.org not present in cache

 boai:~ boai$ sudo gem sources -a http://rubygems.org

 https://rubygems.org is recommended for security over http://rubygems.org

 Do you want to add this insecure source? [yn]  y

最后会提示

Do you want to add this insecure source? [yn]  
你选择 y就行了
然后出现：
http://rubygems.org added to sources

这就说明成功了，就可以执行下面的安装了。

在2016年7月1日开始，会出现以下错误，

rvm: command not found Mac

activesupport requires Ruby version >= 2.2.2.

这两种错误的解决办法如下;

强烈建议 使用rvm安装ruby

1、安装 RVM

RVM:Ruby Version Manager,Ruby版本管理器，包括Ruby的版本管理和Gem库管理(gemset)

  1. $ curl -L get.rvm.io | bash -s stable

等待一段时间后就可以成功安装好 RVM。

  1. $ source ~/.bashrc
  2. $ source ~/.bash_profile

测试是否安装正常

rvm -v

 2、用RVM升级Ruby
  1. #查看当前ruby版本
  2. $ ruby -v
  3. ruby 1.8.7
  4. #列出已知的ruby版本
  5. $ rvm list known
  6. #安装ruby 2.3.0

  7. boaideMacBook:~ boai$ rvm install 2.3.0

期间会让你输入两次回车键，记得哦，别像我一样傻等了半天，以为网卡呢， 
boaideMacBook:~ boai$ rvm install 2.3.0

Searching for binary rubies, this might take some time.

No binary rubies available for: osx/10.11/x86_64/ruby-2.3.0.

Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.

Checking requirements for osx.

About to install Homebrew, press `Enter` for default installation in `/usr/local`,

type new path if you wish custom Homebrew installation (the path needs to be writable for user)

:

==> This script will install:

/usr/local/bin/brew

/usr/local/Library/...

/usr/local/share/doc/homebrew

/usr/local/share/man/man1/brew.1

/usr/local/share/zsh/site-functions/_brew

/usr/local/etc/bash_completion.d/brew

==> The following directories will be made group writable:

/usr/local/.

==> The following directories will have their owner set to boai:

/usr/local/.

==> The following directories will have their group set to admin:

/usr/local/.

Press RETURN to continue or any other key to abort

==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/.

Password:

==> /usr/bin/sudo /usr/sbin/chown boai /usr/local/.

==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/.

==> /usr/bin/sudo /bin/mkdir /Users/boai/Library/Caches/Homebrew

==> /usr/bin/sudo /bin/chmod g+rwx /Users/boai/Library/Caches/Homebrew

==> /usr/bin/sudo /usr/sbin/chown boai /Users/boai/Library/Caches/Homebrew

==> Downloading and installing Homebrew...

remote: Counting objects: 520, done.

remote: Compressing objects: 100% (461/461), done.

remote: Total 520 (delta 30), reused 318 (delta 28), pack-reused 0

Receiving objects: 100% (520/520), 786.43 KiB | 146.00 KiB/s, done.

Resolving deltas: 100% (30/30), done.

From https://github.com/Homebrew/brew

 * [new branch]      master     -> origin/master

HEAD is now at 5768e32 test-bot: fix coverage on Travis CI

==> Tapping homebrew/core

Cloning into '/usr/local/Library/Taps/homebrew/homebrew-core'...

remote: Counting objects: 3718, done.

remote: Compressing objects: 100% (3605/3605), done.

remote: Total 3718 (delta 7), reused 2085 (delta 4), pack-reused 0

Receiving objects: 100% (3718/3718), 2.89 MiB | 521.00 KiB/s, done.

Resolving deltas: 100% (7/7), done.

Checking connectivity... done.

Tapped 3596 formulae (3,744 files, 9.0M)

==> Installation successful!

==> Next steps

Run `brew help` to get started

Further documentation: https://git.io/brew-docs

==> Homebrew has enabled anonymous aggregate user behaviour analytics

Read the analytics documentation (and how to opt-out) here:

  https://git.io/brew-analytics

Installing requirements for osx.

Updating system.....

Installing required packages: autoconf, automake, libtool, pkg-config, libyaml, readline, libksba, openssl........

Certificates in '/usr/local/etc/openssl/cert.pem' are already up to date.

Requirements installation successful.

Installing Ruby from source to: /Users/boai/.rvm/rubies/ruby-2.3.0, this may take a while depending on your cpu(s)...

ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

                                 Dload  Upload   Total   Spent    Left  Speed

100 13.5M  100 13.5M    0     0  3078k      0  0:00:04  0:00:04 --:--:-- 3477k

ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....

ruby-2.3.0 - #configuring....................................................

时间比较长：

安装成功后提示:

ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

                                 Dload  Upload   Total   Spent    Left  Speed

100 13.5M  100 13.5M    0     0  3078k      0  0:00:04  0:00:04 --:--:-- 3477k

ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....

ruby-2.3.0 - #configuring......................................................|

ruby-2.3.0 - #post-configuration.

ruby-2.3.0 - #compiling........................................................|

ruby-2.3.0 - #installing.........

ruby-2.3.0 - #making binaries executable..

Installed rubygems 2.5.1 is newer than 2.4.8 provided with installed ruby, skipping installation, use --force to force installation.

ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0@global

ruby-2.3.0 - #importing gemset /Users/boai/.rvm/gemsets/global.gems............|

ruby-2.3.0 - #generating global wrappers........

ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0

ruby-2.3.0 - #importing gemsetfile /Users/boai/.rvm/gemsets/default.gems evaluated to empty gem list

ruby-2.3.0 - #generating default wrappers........

ruby-2.3.0 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake).

Install of ruby-2.3.0 - #complete

Ruby was built without documentation, to build it run: rvm docs generate-ri

boaideMacBook:~ boai$

然后再执行这句代码:

1 boai:~ boai$ sudo gem install cocoapods

boaideMacBook:~ boai$ sudo gem install cocoapods

Password:

Fetching: i18n-0.7.0.gem (100%)

Successfully installed i18n-0.7.0

Fetching: thread_safe-0.3.5.gem (100%)

Successfully installed thread_safe-0.3.5

Fetching: tzinfo-1.2.2.gem (100%)

Successfully installed tzinfo-1.2.2

Fetching: concurrent-ruby-1.0.2.gem (100%)

Successfully installed concurrent-ruby-1.0.2

Fetching: activesupport-5.0.0.gem (100%)

Successfully installed activesupport-5.0.0

Fetching: nap-1.1.0.gem (100%)

Successfully installed nap-1.1.0

Fetching: fuzzy_match-2.0.4.gem (100%)

Successfully installed fuzzy_match-2.0.4

Fetching: cocoapods-core-1.0.1.gem (100%)

Successfully installed cocoapods-core-1.0.1

Fetching: claide-1.0.0.gem (100%)

Successfully installed claide-1.0.0

Fetching: cocoapods-deintegrate-1.0.0.gem (100%)

Successfully installed cocoapods-deintegrate-1.0.0

Fetching: cocoapods-downloader-1.1.0.gem (100%)

Successfully installed cocoapods-downloader-1.1.0

Fetching: cocoapods-plugins-1.0.0.gem (100%)

Successfully installed cocoapods-plugins-1.0.0

Fetching: cocoapods-search-1.0.0.gem (100%)

Successfully installed cocoapods-search-1.0.0

Fetching: cocoapods-stats-1.0.0.gem (100%)

Successfully installed cocoapods-stats-1.0.0

Fetching: netrc-0.7.8.gem (100%)

Successfully installed netrc-0.7.8

Fetching: cocoapods-trunk-1.0.0.gem (100%)

Successfully installed cocoapods-trunk-1.0.0

Fetching: cocoapods-try-1.1.0.gem (100%)

Successfully installed cocoapods-try-1.1.0

Fetching: molinillo-0.4.5.gem (100%)

Successfully installed molinillo-0.4.5

Fetching: colored-1.2.gem (100%)

Successfully installed colored-1.2

Fetching: xcodeproj-1.2.0.gem (100%)

Successfully installed xcodeproj-1.2.0

Fetching: escape-0.0.4.gem (100%)

Successfully installed escape-0.0.4

Fetching: fourflusher-0.3.2.gem (100%)

Successfully installed fourflusher-0.3.2

Fetching: cocoapods-1.0.1.gem (100%)

Successfully installed cocoapods-1.0.1

Parsing documentation for i18n-0.7.0

Installing ri documentation for i18n-0.7.0

Parsing documentation for thread_safe-0.3.5

Installing ri documentation for thread_safe-0.3.5

Parsing documentation for tzinfo-1.2.2

Installing ri documentation for tzinfo-1.2.2

Parsing documentation for concurrent-ruby-1.0.2

Installing ri documentation for concurrent-ruby-1.0.2

Parsing documentation for activesupport-5.0.0

Installing ri documentation for activesupport-5.0.0

Parsing documentation for nap-1.1.0

Installing ri documentation for nap-1.1.0

Parsing documentation for fuzzy_match-2.0.4

Installing ri documentation for fuzzy_match-2.0.4

Parsing documentation for cocoapods-core-1.0.1

Installing ri documentation for cocoapods-core-1.0.1

Parsing documentation for claide-1.0.0

Installing ri documentation for claide-1.0.0

Parsing documentation for cocoapods-deintegrate-1.0.0

Installing ri documentation for cocoapods-deintegrate-1.0.0

Parsing documentation for cocoapods-downloader-1.1.0

Installing ri documentation for cocoapods-downloader-1.1.0

Parsing documentation for cocoapods-plugins-1.0.0

Installing ri documentation for cocoapods-plugins-1.0.0

Parsing documentation for cocoapods-search-1.0.0

Installing ri documentation for cocoapods-search-1.0.0

Parsing documentation for cocoapods-stats-1.0.0

Installing ri documentation for cocoapods-stats-1.0.0

Parsing documentation for netrc-0.7.8

Installing ri documentation for netrc-0.7.8

Parsing documentation for cocoapods-trunk-1.0.0

Installing ri documentation for cocoapods-trunk-1.0.0

Parsing documentation for cocoapods-try-1.1.0

Installing ri documentation for cocoapods-try-1.1.0

Parsing documentation for molinillo-0.4.5

Installing ri documentation for molinillo-0.4.5

Parsing documentation for colored-1.2

Installing ri documentation for colored-1.2

Parsing documentation for xcodeproj-1.2.0

Installing ri documentation for xcodeproj-1.2.0

Parsing documentation for escape-0.0.4

Installing ri documentation for escape-0.0.4

Parsing documentation for fourflusher-0.3.2

Installing ri documentation for fourflusher-0.3.2

Parsing documentation for cocoapods-1.0.1

Installing ri documentation for cocoapods-1.0.1

Done installing documentation for i18n, thread_safe, tzinfo, concurrent-ruby, activesupport, nap, fuzzy_match, cocoapods-core, claide, cocoapods-deintegrate, cocoapods-downloader, cocoapods-plugins, cocoapods-search, cocoapods-stats, netrc, cocoapods-trunk, cocoapods-try, molinillo, colored, xcodeproj, escape, fourflusher, cocoapods after 24 seconds

23 gems installed

boaideMacBook:~ boai$

这就代表安装成功了！

3、安装cocopods

执行下面的语句：

sudo gem install cocoapods

据说新版本改了，没有验证，大家可以试试看：

sudo gem install -n /usr/local/bin cocoapods

会出现下面的界面：（激动。。。）

boai:~ boai$ sudo gem install cocoapods

Fetching: nap-1.0..gem (%)

Successfully installed nap-1.0.

Fetching: thread_safe-0.3..gem (%)

Successfully installed thread_safe-0.3.

Fetching: tzinfo-1.2..gem (%)

Successfully installed tzinfo-1.2.

Fetching: i18n-0.7..gem (%)

Successfully installed i18n-0.7.

Fetching: activesupport-4.2..gem (%)

Successfully installed activesupport-4.2.

Fetching: escape-0.0..gem (%)

Successfully installed escape-0.0.

Fetching: colored-1.2.gem (%)

Successfully installed colored-1.2

Fetching: molinillo-0.4..gem (%)

Successfully installed molinillo-0.4.

Fetching: netrc-0.7..gem (%)

Successfully installed netrc-0.7.

Fetching: cocoapods-trunk-0.6..gem (%)

Successfully installed cocoapods-trunk-0.6.

Fetching: cocoapods-try-0.5..gem (%)

Successfully installed cocoapods-try-0.5.

Fetching: cocoapods-stats-0.6..gem (%)

Successfully installed cocoapods-stats-0.6.

Fetching: cocoapods-search-0.1..gem (%)

Successfully installed cocoapods-search-0.1.

Fetching: cocoapods-plugins-0.4..gem (%)

Successfully installed cocoapods-plugins-0.4.

Fetching: cocoapods-downloader-0.9..gem (%)

Successfully installed cocoapods-downloader-0.9.

Fetching: claide-0.9..gem (%)

Successfully installed claide-0.9.

Fetching: xcodeproj-0.28..gem (%)

Successfully installed xcodeproj-0.28.

Fetching: fuzzy_match-2.0..gem (%)

Successfully installed fuzzy_match-2.0.

Fetching: cocoapods-core-0.39..gem (%)

Successfully installed cocoapods-core-0.39.

Fetching: cocoapods-0.39..gem (%)

Successfully installed cocoapods-0.39.

Parsing documentation for nap-1.0.

Installing ri documentation for nap-1.0.

Parsing documentation for thread_safe-0.3.

Installing ri documentation for thread_safe-0.3.

Parsing documentation for tzinfo-1.2.

Installing ri documentation for tzinfo-1.2.

Parsing documentation for i18n-0.7.

Installing ri documentation for i18n-0.7.

Parsing documentation for activesupport-4.2.

Installing ri documentation for activesupport-4.2.

Parsing documentation for escape-0.0.

Installing ri documentation for escape-0.0.

Parsing documentation for colored-1.2

Installing ri documentation for colored-1.2

Parsing documentation for molinillo-0.4.

Installing ri documentation for molinillo-0.4.

Parsing documentation for netrc-0.7.

Installing ri documentation for netrc-0.7.

Parsing documentation for cocoapods-trunk-0.6.

Installing ri documentation for cocoapods-trunk-0.6.

Parsing documentation for cocoapods-try-0.5.

Installing ri documentation for cocoapods-try-0.5.

Parsing documentation for cocoapods-stats-0.6.

Installing ri documentation for cocoapods-stats-0.6.

Parsing documentation for cocoapods-search-0.1.

Installing ri documentation for cocoapods-search-0.1.

Parsing documentation for cocoapods-plugins-0.4.

Installing ri documentation for cocoapods-plugins-0.4.

Parsing documentation for cocoapods-downloader-0.9.

Installing ri documentation for cocoapods-downloader-0.9.

Parsing documentation for claide-0.9.

Installing ri documentation for claide-0.9.

Parsing documentation for xcodeproj-0.28.

Installing ri documentation for xcodeproj-0.28.

Parsing documentation for fuzzy_match-2.0.

Installing ri documentation for fuzzy_match-2.0.

Parsing documentation for cocoapods-core-0.39.

Installing ri documentation for cocoapods-core-0.39.

Parsing documentation for cocoapods-0.39.

Installing ri documentation for cocoapods-0.39.

Done installing documentation for nap, thread_safe, tzinfo, i18n, activesupport, escape, colored, molinillo, netrc, cocoapods-trunk, cocoapods-try, cocoapods-stats, cocoapods-search, cocoapods-plugins, cocoapods-downloader, claide, xcodeproj, fuzzy_match, cocoapods-core, cocoapods after  seconds

WARNING:  Unable to pull data from 'http://ruby.taobao.org/': bad response Not Found  (http://ruby.taobao.org/specs.4.8.gz)

 gems installed

看到最后一行代码，你就放120个心吧。。。

然后就可以查看你的pods版本了：

输入：pod

然后会出现下面的代码：

boai:~ boai$ pod

Usage:

    $ pod COMMAND

      CocoaPods, the Cocoa library package manager.

Commands:

    + cache      Manipulate the CocoaPods cache

    + init       Generate a Podfile for the current directory.

    + install    Install project dependencies to Podfile.lock versions

    + ipc        Inter-process communication

    + lib        Develop pods

    + list       List pods

    + outdated   Show outdated project dependencies

    + plugins    Show available CocoaPods plugins

    + repo       Manage spec-repositories

    + search     Search for pods.

    + setup      Setup the CocoaPods environment

    + spec       Manage pod specs

    + trunk      Interact with the CocoaPods API (e.g. publishing new specs)

    + try        Try a Pod!

    + update     Update outdated project dependencies and create new

                 Podfile.lock

Options:

    --silent     Show nothing

    --version    Show the version of the tool

    --verbose    Show more debugging information

    --no-ansi    Show output without ANSI codes

    --help       Show help banner of specified command

boai:~ boai$

这就安装成功了，就可以正常使用pod了。。。

4、接下来就可以在项目中使用了，

打开终端：

cd 你的项目路径

boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest

然后：输入touch podfile  或者 pod init (会自动生成podfile文件)

boai:BAPDCViewTest boai$ pod init

boai:BAPDCViewTest boai$ pod install

接下来出现：

Last login: Fri Nov  :: on ttys006

boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest 

boai:BAPDCViewTest boai$ touch podfile

boai:BAPDCViewTest boai$ pod install

Updating local specs repositories

Analyzing dependencies

Downloading dependencies

Generating Pods project

Integrating client project

[!] Please close any current Xcode sessions and use `BAPDCViewTest.xcworkspace` for this project from now on.

Sending stats

Pod installation complete! There are  dependencies from the Podfile and  total

pods installed.

[!] [!] The Podfile does not contain any dependencies.

boai:BAPDCViewTest boai$

这就成功了，然后再看看你的项目路径里面，是不是多出来很多文件？

如下图：

然后双击***.workspace 文件就可以使用pods了！

5、新版本pod 安装问题：

podfile升级之后到最新版本，pod里的内容必须明确指出所用第三方库的target，否则会出现The dependency `` is not used in any concrete target这样的错误。

以下从三个步骤陈述：

4.1. Podfile升级

查看pod版本：

pod --version

pod 升级（此时是升级到1.0.0.beta.2版本）：

sudo gem install cocoapods --pre

4.2. 错误内容：

我的Podfile的内容是：

pod ‘SDWebImage‘, ‘3.6‘

pod install后出现错误The dependency `` is not used in any concrete target

pod install

/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/universal-darwin14/rbconfig.rb:213: warning: Insecure world writable dir /Applications/Cocos/tools/ant/bin in PATH, mode 040777

Re-creating CocoaPods due to major version update.

Updating local specs repositories

Analyzing dependencies

The dependency `SDWebImage (= 3.6)` is not used in any concrete target.

4.3. 修改方法：

Podfile内容更改：

步骤：

4.3.1 双击双击***.workspace 文件，打开项目

4.3.2 拉到最下面，找到pods，打开后点击podfile文件，

4.3.3 在podfile里面添加所需要的三方库

最终的podfile 文件规范内容为下：

# Uncomment this line to define a global platform for your project

# platform :ios, '8.0'

# Uncomment this line if you're using Swift

# use_frameworks!

# 注意：xcodeproj '***.xcodeproj'  这句新版本必须要写上，***为你的工程名字，最下面记得要加上  @end

xcodeproj 'BABaseProject.xcodeproj'

# 去掉由pod引入的第三方库的警告，需要更新命令才生效

inhibit_all_warnings!

target 'BABaseProject' do

    # 对系统原生的AutoLayout 的 NSLayoutConstraints类的封装，优雅的链式语法，GitHub 排名第三

    pod 'Masonry', '~> 0.6.4'

    # 两个都是自动布局框架

    pod 'SDAutoLayout', '~> 1.31'

    # 自定义button框架

    pod 'BAButton', '~> 1.0.1'

end

target 'BABaseProjectTests' do

end

target 'BABaseProjectUITests' do

end

4.3.4 完成podfile 的内容更改后，记得 cmd + s 保存更改，然后打开终端

4.3.5  在终端中cd 项目路径，打开项目后，输入：

pod install --verbose --no-repo-update

pod update --verbose --no-repo-update

或者

pod install --no-repo-update

pod update --no-repo-update

然后看你的项目路径pod下面， 是不是已经添加了你所需要的三方库呢？

如果更新pod 的时候出现这个问题：

安装cocoapods遇到error: RPC failed; curl 56 SSLRead() return error -36问题

解决办法如下：终端输入以下代码：

<code

 class="hljs cs has-numbering" style="display: block; padding: 0px;

background-color: transparent; color: inherit; box-sizing: border-box;

font-family: 'Source Code Pro', monospace;font-size:undefined;

white-space: pre; border-top-left-radius: 0px; border-top-right-radius:

0px; border-bottom-right-radius: 0px; border-bottom-left-radius: 0px;

word-wrap: normal; background-position: initial initial;

background-repeat: initial initial;">sudo xcode-<span

class="hljs-keyword" style="color: rgb(0, 0, 136); box-sizing:

border-box;">select</span> -<span class="hljs-keyword"

style="color: rgb(0, 0, 136); box-sizing:

border-box;">switch</span>

/Applications/Xcode.app/Contents/Developers</code><ul

class="pre-numbering" style="box-sizing: border-box; position: absolute;

 width: 50px; background-color: rgb(238, 238, 238); top: 0px; left: 0px;

 margin: 0px; padding: 6px 0px 40px; border-right-width: 1px;

border-right-style: solid; border-right-color: rgb(221, 221, 221);

list-style: none; text-align: right;"><li style="box-sizing:

border-box; padding: 0px 5px;">1</li></ul><ul

class="pre-numbering" style="box-sizing: border-box; position: absolute;

 width: 50px; background-color: rgb(238, 238, 238); top: 0px; left: 0px;

 margin: 0px; padding: 6px 0px 40px; border-right-width: 1px;

border-right-style: solid; border-right-color: rgb(221, 221, 221);

list-style: none; text-align: right;"><li style="box-sizing:

border-box; padding: 0px 5px;">1</li></ul>

然后再更新pod试试！

如果出现这个：

[!] xcodeproj was renamed to `project`. Please use that from now on.

只需要将这里的名字改过来就行了：

 # Uncomment this line to define a global platform for your project

 # platform :ios, '8.0'

 # Uncomment this line if you're using Swift

 # use_frameworks!

 project 'BABaseProject.project'

 # 去掉由pod引入的第三方库的警告，需要更新命令才生效

 inhibit_all_warnings!

 # pod 快速更新方法

 # pod update --verbose --no-repo-update

 target 'BABaseProject' do

5、最后给大家点推荐内容：

5.1、一个基于 MVVM 和 MVC 设计模式的基本项目框架，项目用到的各种类，各种封装，各种三方库的综合项目，欢迎大家使用！

有了『BABaseProject』一个基于 MVVM 和 MVC 设计模式的基本项目框架，以后开发项目再也不用担心自己搭建框架了！

5.2、完全实现『UIButton』的自定义的类库 

博爱的博客：http://boai.github.io

博爱的博客园：http://www.cnblogs.com/boai/

博爱的简书：http://www.jianshu.com/users/95c9800fdf47/latest_articles

简书专题链接：http://www.jianshu.com/collections/250078/submissions

好了，大功告成！

相关文章