zt-Simple source policy routing

时间：2022-05-24 14:27:44

原文地址： http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.simple.html

Linux Advanced Routing & Traffic Control HOWTO
Prev Chapter 4. Rules - routing policy database Next

4.1. Simple source policy routing

Let's take a real example once again, I have 2 (actually 3, about time I returned them) cable modems, connected to a Linux NAT ('masquerading') router. People living here pay me to use the Internet. Suppose one of my house mates only visits hotmail and wants to pay less. This is fine with me, but they'll end up using the low-end cable modem.

The 'fast' cable modem is known as 212.64.94.251 and is a PPP link to 212.64.94.1. The 'slow' cable modem is known by various ip addresses, 212.64.78.148 in this example and is a link to 195.96.98.253.

The local table:

[ahu@home ahu]$ ip route list table local

broadcast 127.255.255.255 dev lo  proto kernel  scope link  src 127.0.0.1

local 10.0.0.1 dev eth0  proto kernel  scope host  src 10.0.0.1

broadcast 10.0.0.0 dev eth0  proto kernel  scope link  src 10.0.0.1

local 212.64.94.251 dev ppp0  proto kernel  scope host  src 212.64.94.251

broadcast 10.255.255.255 dev eth0  proto kernel  scope link  src 10.0.0.1

broadcast 127.0.0.0 dev lo  proto kernel  scope link  src 127.0.0.1

local 212.64.78.148 dev ppp2  proto kernel  scope host  src 212.64.78.148

local 127.0.0.1 dev lo  proto kernel  scope host  src 127.0.0.1

local 127.0.0.0/8 dev lo  proto kernel  scope host  src 127.0.0.1

Lots of obvious things, but things that need to be specified somewhere. Well, here they are. The default table is empty.

Let's view the 'main' table:

[ahu@home ahu]$ ip route list table main

195.96.98.253 dev ppp2  proto kernel  scope link  src 212.64.78.148

212.64.94.1 dev ppp0  proto kernel  scope link  src 212.64.94.251

10.0.0.0/8 dev eth0  proto kernel  scope link  src 10.0.0.1

127.0.0.0/8 dev lo  scope link

default via 212.64.94.1 dev ppp0

We now generate a new rule which we call 'John', for our hypothetical house mate. Although we can work with pure numbers, it's far easier if we add our tables to /etc/iproute2/rt_tables.

# echo 200 John >> /etc/iproute2/rt_tables

# ip rule add from 10.0.0.10 table John

# ip rule ls

0:	from all lookup local

32765:	from 10.0.0.10 lookup John

32766:	from all lookup main

32767:	from all lookup default

Now all that is left is to generate John's table, and flush the route cache:

# ip route add default via 195.96.98.253 dev ppp2 table John

# ip route flush cache

And we are done. It is left as an exercise for the reader to implement this in ip-up.

Prev Home Next
Rules - routing policy database Up Routing for multiple uplinks/providers

相关文章