After we introduced locked thread detection to Plumbr couple of months ago, we have started to receive queries similar to “hey, great, now I understand what is causing my performance issues, but what I am supposed to do now?”
We are working hard to build the solution instructions into our own product, but in this post I am going to share several common techniques you can apply independent of the tool used for detecting the lock. The methods include lock splitting, concurrent data structures, protecting the data instead of the code and lock scope reduction.
Locking is not evil, lock contention is
Whenever you face a performance problem with the threaded code there is a chance that you will start blaming locks. After all, common “knowledge” is that locks are slow and limit scalability. So if you are equipped with this “knowledge” and start to optimize the code and getting rid of locks there is a chance that you end up introducing nasty concurrency bugs that will surface later on.
So it is important to understand the difference between contended and uncontended locks. Lock contention occurs when a thread is trying to enter the synchronized block/method currently executed by another thread. This second thread is now forced to wait until the first thread has completed executing the synchronized block and releases the monitor. When only one thread at a time is trying to execute the synchronized code, the lock stays uncontended.
As a matter of fact, synchronization in JVM is optimized for the uncontended case and for the vast majority of the applications, uncontended locks pose next to no overhead during execution. So, it is not locks you should blame for performance, but contended locks. Equipped with this knowledge, lets see what we can do to reduce either the likelihood of contention or the length of the contention.
Protect the data not the code
A quick way to achieve thread-safety is to lock access to the whole method. For example, take look at the following example, illustrating a naive attempt to build an online poker server:
01.
class
GameServer {
02.
public
Map<<String, List<Player>> tables =
new
HashMap<String, List<Player>>();
03.
04.
05.
06.
07.
public
synchronized
void
join(Player player, Table table) {
08.
if
(player.getAccountBalance() > table.getLimit()) {
09.
List<Player> tablePlayers = tables.get(table.getId());
10.
if
(tablePlayers.size() <
9
) {
11.
tablePlayers.add(player);
12.
}
13.
}
14.
}
15.
public
synchronized
void
leave(Player player, Table table) {
/*body skipped for brevity*/
}
16.
public
synchronized
void
createTable() {
/*body skipped for brevity*/
}
17.
public
synchronized
void
destroyTable(Table table) {
/*body skipped for brevity*/
}
18.
}
The intentions of the author have been good - when new players join() the table, there must be a guarantee that the number of players seated at the table would not exceed the table capacity of nine.
But whenever such a solution would actually be responsible for seating players to tables - even on a poker site with moderate traffic, the system would be doomed to constantly trigger contention events by threads waiting for the lock to be released. Locked block contains account balance and table limit checks which potentially can involve expensive operations both increasing the likelihood and length of the contention.
First step towards solution would be making sure we are protecting the data, not the code by moving the synchronization from the method declaration to the method body. In the minimalistic example above, it might not change much at the first place. But lets consider the whole GameServerinterface, not just the single join() method:
01.
class
GameServer {
02.
public
Map<String, List<Player>> tables =
new
HashMap<String, List<Player>>();
03.
04.
05.
06.
07.
public
void
join(Player player, Table table) {
08.
synchronized
(tables) {
09.
if
(player.getAccountBalance() > table.getLimit()) {
10.
List<Player> tablePlayers = tables.get(table.getId());
11.
if
(tablePlayers.size() <
9
) {
12.
tablePlayers.add(player);
13.
}
14.
}
15.
}
16.
}
17.
public
void
leave(Player player, Table table) {
/* body skipped for brevity */
}
18.
public
void
createTable() {
/* body skipped for brevity */
}
19.
public
void
destroyTable(Table table) {
/* body skipped for brevity */
}
20.
}
What originally seemed to be a minor change, now affects the behaviour of the whole class. Whenever players were joining tables, the previously synchronized methods locked on theGameServer instance (this) and introduced contention events to players trying to simultaneouslyleave() tables. Moving the lock from the method signature to the method body postpones the locking and reduces the contention likelihood.
Reduce the lock scope
Now, after making sure it is the data we actually protect, not the code, we should make sure our solution is locking only what is necessary - for example when the code above is rewritten as follows:
01.
public
class
GameServer {
02.
public
Map<String, List<Player>> tables =
new
HashMap<String, List<Player>>();
03.
04.
05.
06.
07.
public
void
join(Player player, Table table) {
08.
if
(player.getAccountBalance() > table.getLimit()) {
09.
synchronized
(tables) {
10.
List<Player> tablePlayers = tables.get(table.getId());
11.
if
(tablePlayers.size() <
9
) {
12.
tablePlayers.add(player);
13.
}
14.
}
15.
}
16.
}
17.
//other methods skipped for brevity
18.
}
then the potentially time-consuming operation of checking player account balance (which potentially can involve IO operations) is now outside the lock scope. Notice that the lock was introduced only to protect against exceeding the table capacity and the account balance check is not anyhow part of this protective measure.
Split your locks
When we look at the last code example, you can clearly notice that the whole data structure is protected by the same lock. Considering that we might hold thousands of poker tables in this structure, it still poses a high risk for contention events as we have to protect each table separately from overflowing in capacity.
For this there is an easy way to introduce individual locks per table, such as in the following example:
01.
public
class
GameServer {
02.
public
Map<String, List<Player>> tables =
new
HashMap<String, List<Player>>();
03.
04.
05.
06.
07.
public
void
join(Player player, Table table) {
08.
if
(player.getAccountBalance() > table.getLimit()) {
09.
List<Player> tablePlayers = tables.get(table.getId());
10.
synchronized
(tablePlayers) {
11.
if
(tablePlayers.size() <
9
) {
12.
tablePlayers.add(player);
13.
}
14.
}
15.
}
16.
}
17.
//other methods skipped for brevity
18.
}
Now, if we synchronize the access only to the same table instead of all the tables, we have significantly reduced the likelihood of locks becoming contended. Having for example 100 tables in our data structure, the likelihood of the contention is now 100x smaller than before.
Use concurrent data structures
Another improvement is to drop the traditional single-threaded data structures and use data structures designed explicitly for concurrent usage. For example, when picking ConcurrentHashMapto store all your poker tables would result in code similar to following:
01.
public
class
GameServer {
02.
public
Map<String, List<Player>> tables =
new
ConcurrentHashMap<String, List<Player>>();
03.
04.
05.
06.
07.
public
synchronized
void
join(Player player, Table table) {
/*Method body skipped for brevity*/
}
08.
public
synchronized
void
leave(Player player, Table table) {
/*Method body skipped for brevity*/
}
09.
10.
11.
12.
13.
public
synchronized
void
createTable() {
14.
Table table =
new
Table();
15.
tables.put(table.getId(), table);
16.
}
17.
18.
19.
20.
21.
public
synchronized
void
destroyTable(Table table) {
22.
tables.remove(table.getId());
23.
}
24.
}
The synchronization in join() and leave() methods is still behaving as in our previous example, as we need to protect the integrity of individual tables. So no help from ConcurrentHashMap in this regards. But as we are also creating new tables and destroying tables in createTable() and destroyTable()methods, all these operations to the ConcurrentHashMap are fully concurrent, permitting to increase or reduce the number of tables in parallel.
Other tips and tricks
- Reduce the visibility of the lock. In the example above, the locks are declared public and are thus visible to the world, so there is there is a chance that someone else will ruin your work by also locking on your carefully picked monitors.
- Check out java.util.concurrent.locks to see whether any of the locking strategies implemented there will improve the solution.
- Use atomic operations. The simple counter increase we are actually conducting in example above does not actually require a lock. Replacing the Integer in count tracking withAtomicInteger would most suit this example just fine.
Hope the article helped you to solve the lock contention issues, independent of whether you are using Plumbr automatic lock detection solutionor manually extracting the information from thread dumps.
reference from:
http://java.dzone.com/articles/improving-lock-performance