1、编辑grub文件
sudo gedit /etc/default/grub
把
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
改成
GRUB_CMDLINE_LINUX_DEFAULT=""
并在最后一行加入
GRUB_GFXPAYLOAD_LINUX=None
以下是完整修改后的示例
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration' GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console # The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_GFXPAYLOAD_LINUX=None
2、编辑10_linux
sudo gedit /etc/grub.d/10_linux
找到如下内容删掉
if ! ${recovery} ; then
save_default_entry | sed -e "s/^/\t/"
cat << EOF
gfxmode \$linux_gfx_mode
EOF
fi
提示：如果没有就不用删除。
3、更新
sudo update-grub
重启即可看见效果。
4、如果曾经修改过/etc/initramfs-tools/conf.d/splash，必须把以下内容删掉
FRAMEBUFFER=y
然后更新
sudo update-initramfs -u
附录：
原版有界面的完整配置：
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration' GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console # The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
参考：
http://www.xzcblog.com/m/?post=160（这个才是原版作者）