1、安装编译工具和库文件,红色部分提示在centos镜像站点上查不到包,用yum安装的时候要认真看那些包没有找到,用yum的时候尽量不要使用-y选项
yum install gcc automake autoconf libtool make gcc-c++ glibc libmcrypt-devel mhash-devel libxslt-devel \
libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel \
zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel \
ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel \
krb5 krb5-devel libidn libidn-devel openssl openssl-devel
2、查看PCRE功能的的版本是否安装, PCRE 作用是让 Ngnix 支持 Rewrite 功能。如果提示有版本,则已安装。而没有该命令则没有安装,请yum install -y pcre*
pcre-config --version
3、获取nginx的安装包,这是1.10.2版本,其他版本请到官网获取地址,或者使用FTP上传
源码官网
4、解压
tar -xvpzf nginx-1.10.2.tar.gz
5、添加用户并创建用户组nginx,将nginx用户添加到nginx用户组中,并编译安装nginx.
groupadd nginx
useradd nginx -g nginx
passwd nginx
cd nginx-1.10.2
./configure --user=nginx --group=nginx --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module
make
make install
nginx直接启动的方法:
/usr/local/sbin/nginx #启动nginx
[root@ikown sbin]# ./nginx -h
nginx version: nginx/1.10.2
Usage: nginx [-?hvVtTq] [-s signal] [-c filename] [-p prefix] [-g directives]
Options:
-?,-h : this help
-v : show version and exit
-V : show version and configure options then exit
-t : test configuration and exit
-T : test configuration, dump it and exit
-q : suppress non-error messages during configuration testing
-s signal : send signal to a master process: stop, quit, reopen, reload
-p prefix : set prefix path (default: /usr/local/nginx/)
-c filename : set configuration file (default: conf/nginx.conf)
-g directives : set global directives out of configuration file
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
这上面是安装nginx,在安装php之前,把数据库和nginx安装好。下面是安装php,和整合nginx和数据库的相关步骤
6、下载php压缩包,解压
官网下载源码
7、编译安装php环境,注意php-mcrypt libmcrypt libmcrypt-devel mhash-devel 有版权,一般系统yum源没有相关包,请安装第三方源
yum install libmcrypt-2.5.8-13.el7.x86_64.rpm libmcrypt-devel-2.5.8-13.el7.x86_64.rpm mhash-0.9.9.9-10.el7.x86_64.rpm mhash-devel-0.9.9.9-10.el7.x86_64.rpm php-mcrypt-5.4.16-7.el7.x86_64.rpm
注意红色文字改相关文件的路径。编译过程1个小时左右,视cpu性能而定。
./configure \
--prefix=/usr/local/php7 \
--exec-prefix=/usr/local/php7 \
--bindir=/usr/local/php7/bin \
--sbindir=/usr/local/php7/sbin \
--includedir=/usr/local/php7/include \
--libdir=/usr/local/php7/lib/php \
--mandir=/usr/local/php7/php/man \
--with-config-file-path=/usr/local/php7/etc \
--with-mcrypt=/usr/include \
--with-mhash \
--with-openssl \
--with-zlib \
--enable-zip \
--enable-mysqlnd \
--with-mysqli=shared,mysqlnd \
--with-pdo-mysql=shared,mysqlnd \
--with-gd \
--with-iconv \
--with-zlib \
--enable-zip \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-xml \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-mbregex \
--enable-mbstring \
--enable-ftp \
--enable-gd-native-ttf \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-soap \
--without-pear \
--with-gettext \
--enable-session \
--with-curl \
--with-jpeg-dir \
--with-freetype-dir \
--enable-opcache \
--enable-fpm \
--without-gdbm \
--disable-fileinfo \
--with-bz2 \
--enable-maintainer-zts \
--with-png-dir \
--enable-ctype
--prefix=/usr/local/php7 \
--exec-prefix=/usr/local/php7 \
--bindir=/usr/local/php7/bin \
--sbindir=/usr/local/php7/sbin \
--includedir=/usr/local/php7/include \
--libdir=/usr/local/php7/lib/php \
--mandir=/usr/local/php7/php/man \
--with-config-file-path=/usr/local/php7/etc \
--with-mcrypt=/usr/include \
--with-mhash \
--with-openssl \
--with-zlib \
--enable-zip \
--enable-mysqlnd \
--with-mysqli=shared,mysqlnd \
--with-pdo-mysql=shared,mysqlnd \
--with-gd \
--with-iconv \
--with-zlib \
--enable-zip \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-xml \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-mbregex \
--enable-mbstring \
--enable-ftp \
--enable-gd-native-ttf \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-soap \
--without-pear \
--with-gettext \
--enable-session \
--with-curl \
--with-jpeg-dir \
--with-freetype-dir \
--enable-opcache \
--enable-fpm \
--without-gdbm \
--disable-fileinfo \
--with-bz2 \
--enable-maintainer-zts \
--with-png-dir \
--enable-ctype
make
make install
8、 由于需要和MySQL进行通信,所以需要特别查看PHP7安装后的lib扩展库目录(/usr/local/php7/lib/php/extensions/no-debug-zts-20160303/),注意20160303不是唯一的,版本不同会改变,请到extensions下查看。需要确保至少存在
mysqli.so
、 pdo_mysql.so
这两个动态库文件.9、开始设置PHP7的配置文件php.ini、php-fpm.conf、www.conf,可以用编译后的配置文件复制到PHP7的配置目录(/usr/local/php7/etc/)。
php-fpm.conf和php.ini 路径为/usr/local/php7/etc/ #php.ini在/etc/php.ini下,需要复制到/usr/local/php7/etc/,并将/etc/php.ini更换名字,如/etc/php.ini.back
www.conf 路径为/usr/local/php7/etc/php-fpm.d
配置文件
[root@ikown etc]# cat php.ini
[PHP]
engine = On
short_open_tag = Off
asp_tags = Off
precision = 14
output_buffering = 4096
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func =
serialize_precision = 17
disable_functions =
disable_classes =
zend.enable_gc = On
expose_php = Off
max_execution_time = 30
max_input_time = 60
memory_limit = 128M
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
display_startup_errors = Off
log_errors = On
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
html_errors = On
variables_order = "GPCS"
request_order = "GP"
register_argc_argv = Off
auto_globals_jit = On
post_max_size = 8M
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir = "/usr/local/php7/lib/php/extensions/no-debug-zts-20160303/"
enable_dl = Off
file_uploads = On
upload_max_filesize = 20M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
zend_extension=opcache.so
extension=mysqli.so
extension=pdo_mysql.so
[CLI Server]
cli_server.color = On
[Date]
date.timezone = PRC
[filter]
[iconv]
[intl]
[sqlite]
[sqlite3]
[Pcre]
[Pdo]
[Pdo_mysql]
pdo_mysql.cache_size = 2000
pdo_mysql.default_socket=
[Phar]
[mail function]
SMTP = localhost
smtp_port = 25
sendmail_path = /usr/sbin/sendmail -t -i
mail.add_x_header = On
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[Interbase]
ibase.allow_persistent = 1
ibase.max_persistent = -1
ibase.max_links = -1
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
ibase.dateformat = "%Y-%m-%d"
ibase.timeformat = "%H:%M:%S"
[MySQL]
mysql.allow_local_infile = On
mysql.allow_persistent = On
mysql.cache_size = 2000
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket = /usr/local/mysql/mysql.sock
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_persistent = -1
mysqli.allow_persistent = On
mysqli.max_links = -1
mysqli.cache_size = 2000
mysqli.default_port = 3306
mysqli.default_socket = /usr/local/mysql/mysql.sock
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mysqlnd]
mysqlnd.collect_statistics = On
mysqlnd.collect_memory_statistics = Off
[OCI8]
[PostgreSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Session]
session.save_handler = files
session.use_cookies = 1
session.use_only_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor = 1000
session.gc_maxlifetime = 1440
session.bug_compat_42 = Off
session.bug_compat_warn = Off
session.referer_check =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 5
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[mbstring]
[gd]
[opcache]
; Determines if Zend OPCache is enabled
opcache.enable=1
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
soap.wsdl_cache_limit = 5
[sysvshm]
[ldap]
ldap.max_links = -1
[mcrypt]
[dba]
[root@ikown etc]# cat php-fpm.conf
[global]
include=/usr/local/php7/etc/php-fpm.d/*.conf
[root@ikown php-fpm.d]# cat www.conf
[www]
user = nginx
group = nginx
listen = 127.0.0.1:9000
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
php_value[session.save_handler] = files
php_value[session.save_path] = /usr/local/php7/session
slowlog = /usr/local/php7/var/log/$pool-slow.log
request_slowlog_timeout = 10s
www.conf红色部分必须是存在的目录,且用户属于nginx和nginx组,说有的配置文件都属于程序所在的用户,比如my.cnf属于mysql用户和mysql用户组。
[root@ikown conf]# cat nginx.conf | grep -v -E '^$|#'
worker_processes 1;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
client_max_body_size 20m;
keepalive_timeout 65;
server {
listen 80;
server_name localhost;
location / {
root html;
index index.html index.htm index.php;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
location ~ \.php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
}
nginx.conf以下代码是新加的
location ~ \.php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
10、测试配置文件是否正确
php-fpm -t
NOTICE: configuration file /usr/local/php7/etc/php-fpm.conf test is successful
11、启动php服务
在完成上面的操作后,就可以正式使用php服务了。启动php进程服务的命令如下:
/usr/local/php7/etc/php-fpm
12、测试nginx是否支持php ,在html文件夹里写一个index.php文件,内容如下,再通过浏览器访问这个文件,就可以看到php的参数。
<?php
Phpinfo();
?>
附录:
[root@cloud nginx-1.10.2]# ./configure --help
--help print this message
--prefix=PATH set installation prefix
--sbin-path=PATH set nginx binary pathname
--modules-path=PATH set modules path
--conf-path=PATH set nginx.conf pathname
--error-log-path=PATH set error log pathname
--pid-path=PATH set nginx.pid pathname
--lock-path=PATH set nginx.lock pathname
--user=USER set non-privileged user for
worker processes
--group=GROUP set non-privileged group for
worker processes
--build=NAME set build name
--builddir=DIR set build directory
--with-select_module enable select module
--without-select_module disable select module
--with-poll_module enable poll module
--without-poll_module disable poll module
--with-threads enable thread pool support
--with-file-aio enable file AIO support
--with-ipv6 enable IPv6 support
--with-http_ssl_module enable ngx_http_ssl_module
--with-http_v2_module enable ngx_http_v2_module
--with-http_realip_module enable ngx_http_realip_module
--with-http_addition_module enable ngx_http_addition_module
--with-http_xslt_module enable ngx_http_xslt_module
--with-http_xslt_module=dynamic enable dynamic ngx_http_xslt_module
--with-http_image_filter_module enable ngx_http_image_filter_module
--with-http_image_filter_module=dynamic
enable dynamic ngx_http_image_filter_module
--with-http_geoip_module enable ngx_http_geoip_module
--with-http_geoip_module=dynamic enable dynamic ngx_http_geoip_module
--with-http_sub_module enable ngx_http_sub_module
--with-http_dav_module enable ngx_http_dav_module
--with-http_flv_module enable ngx_http_flv_module
--with-http_mp4_module enable ngx_http_mp4_module
--with-http_gunzip_module enable ngx_http_gunzip_module
--with-http_gzip_static_module enable ngx_http_gzip_static_module
--with-http_auth_request_module enable ngx_http_auth_request_module
--with-http_random_index_module enable ngx_http_random_index_module
--with-http_secure_link_module enable ngx_http_secure_link_module
--with-http_degradation_module enable ngx_http_degradation_module
--with-http_slice_module enable ngx_http_slice_module
--with-http_stub_status_module enable ngx_http_stub_status_module
--without-http_charset_module disable ngx_http_charset_module
--without-http_gzip_module disable ngx_http_gzip_module
--without-http_ssi_module disable ngx_http_ssi_module
--without-http_userid_module disable ngx_http_userid_module
--without-http_access_module disable ngx_http_access_module
--without-http_auth_basic_module disable ngx_http_auth_basic_module
--without-http_autoindex_module disable ngx_http_autoindex_module
--without-http_geo_module disable ngx_http_geo_module
--without-http_map_module disable ngx_http_map_module
--without-http_split_clients_module disable ngx_http_split_clients_module
--without-http_referer_module disable ngx_http_referer_module
--without-http_rewrite_module disable ngx_http_rewrite_module
--without-http_proxy_module disable ngx_http_proxy_module
--without-http_fastcgi_module disable ngx_http_fastcgi_module
--without-http_uwsgi_module disable ngx_http_uwsgi_module
--without-http_scgi_module disable ngx_http_scgi_module
--without-http_memcached_module disable ngx_http_memcached_module
--without-http_limit_conn_module disable ngx_http_limit_conn_module
--without-http_limit_req_module disable ngx_http_limit_req_module
--without-http_empty_gif_module disable ngx_http_empty_gif_module
--without-http_browser_module disable ngx_http_browser_module
--without-http_upstream_hash_module
disable ngx_http_upstream_hash_module
--without-http_upstream_ip_hash_module
disable ngx_http_upstream_ip_hash_module
--without-http_upstream_least_conn_module
disable ngx_http_upstream_least_conn_module
--without-http_upstream_keepalive_module
disable ngx_http_upstream_keepalive_module
--without-http_upstream_zone_module
disable ngx_http_upstream_zone_module
--with-http_perl_module enable ngx_http_perl_module
--with-http_perl_module=dynamic enable dynamic ngx_http_perl_module
--with-perl_modules_path=PATH set Perl modules path
--with-perl=PATH set perl binary pathname
--http-log-path=PATH set http access log pathname
--http-client-body-temp-path=PATH set path to store
http client request body temporary files
--http-proxy-temp-path=PATH set path to store
http proxy temporary files
--http-fastcgi-temp-path=PATH set path to store
http fastcgi temporary files
--http-uwsgi-temp-path=PATH set path to store
http uwsgi temporary files
--http-scgi-temp-path=PATH set path to store
http scgi temporary files
--without-http disable HTTP server
--without-http-cache disable HTTP cache
--with-mail enable POP3/IMAP4/SMTP proxy module
--with-mail=dynamic enable dynamic POP3/IMAP4/SMTP proxy module
--with-mail_ssl_module enable ngx_mail_ssl_module
--without-mail_pop3_module disable ngx_mail_pop3_module
--without-mail_imap_module disable ngx_mail_imap_module
--without-mail_smtp_module disable ngx_mail_smtp_module
--with-stream enable TCP/UDP proxy module
--with-stream=dynamic enable dynamic TCP/UDP proxy module
--with-stream_ssl_module enable ngx_stream_ssl_module
--without-stream_limit_conn_module disable ngx_stream_limit_conn_module
--without-stream_access_module disable ngx_stream_access_module
--without-stream_upstream_hash_module
disable ngx_stream_upstream_hash_module
--without-stream_upstream_least_conn_module
disable ngx_stream_upstream_least_conn_module
--without-stream_upstream_zone_module
disable ngx_stream_upstream_zone_module
--with-google_perftools_module enable ngx_google_perftools_module
--with-cpp_test_module enable ngx_cpp_test_module
--add-module=PATH enable external module
--add-dynamic-module=PATH enable dynamic external module
--with-cc=PATH set C compiler pathname
--with-cpp=PATH set C preprocessor pathname
--with-cc-opt=OPTIONS set additional C compiler options
--with-ld-opt=OPTIONS set additional linker options
--with-cpu-opt=CPU build for the specified CPU, valid values:
pentium, pentiumpro, pentium3, pentium4,
athlon, opteron, sparc32, sparc64, ppc64
--without-pcre disable PCRE library usage
--with-pcre force PCRE library usage
--with-pcre=DIR set path to PCRE library sources
--with-pcre-opt=OPTIONS set additional build options for PCRE
--with-pcre-jit build PCRE with JIT compilation support
--with-md5=DIR set path to md5 library sources
--with-md5-opt=OPTIONS set additional build options for md5
--with-md5-asm use md5 assembler sources
--with-sha1=DIR set path to sha1 library sources
--with-sha1-opt=OPTIONS set additional build options for sha1
--with-sha1-asm use sha1 assembler sources
--with-zlib=DIR set path to zlib library sources
--with-zlib-opt=OPTIONS set additional build options for zlib
--with-zlib-asm=CPU use zlib assembler sources optimized
for the specified CPU, valid values:
pentium, pentiumpro
--with-libatomic force libatomic_ops library usage
--with-libatomic=DIR set path to libatomic_ops library sources
--with-openssl=DIR set path to OpenSSL library sources
--with-openssl-opt=OPTIONS set additional build options for OpenSSL
--with-debug enable debug logging
[root@cloud php-7.1.0]# ./configure --help
`configure' configures this package to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]
Optional Features and Packages:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-libdir=NAME Look for libraries in .../NAME rather than .../lib
--disable-rpath Disable passing additional runtime library
search paths
--enable-re2c-cgoto Enable -g flag to re2c to use computed goto gcc extension
--disable-gcc-global-regs
whether to enable GCC global register variables
SAPI modules:
--with-apxs2=FILE Build shared Apache 2.0 Handler module. FILE is the optional
pathname to the Apache apxs tool apxs
--disable-cli Disable building CLI version of PHP
(this forces --without-pear)
--enable-embed=TYPE EXPERIMENTAL: Enable building of embedded SAPI library
TYPE is either 'shared' or 'static'. TYPE=shared
--enable-fpm Enable building of the fpm SAPI executable
--with-fpm-user=USER Set the user for php-fpm to run as. (default: nobody)
--with-fpm-group=GRP Set the group for php-fpm to run as. For a system user, this
should usually be set to match the fpm username (default: nobody)
--with-fpm-systemd Activate systemd integration
--with-fpm-acl Use POSIX Access Control Lists
--with-litespeed Build PHP as litespeed module
--enable-phpdbg Build phpdbg
--enable-phpdbg-webhelper Build phpdbg web SAPI support
--enable-phpdbg-debug Build phpdbg in debug mode
--disable-cgi Disable building CGI version of PHP
General settings:
--enable-gcov Enable GCOV code coverage (requires LTP) - FOR DEVELOPERS ONLY!!
--enable-debug Compile with debugging symbols
--with-layout=TYPE Set how installed files will be laid out. Type can
be either PHP or GNU [PHP]
--with-config-file-path=PATH
Set the path in which to look for php.ini [PREFIX/lib]
--with-config-file-scan-dir=PATH
Set the path where to scan for configuration files
--enable-sigchild Enable PHP's own SIGCHLD handler
--enable-libgcc Enable explicitly linking against libgcc
--disable-short-tags Disable the short-form <? start tag by default
--enable-dmalloc Enable dmalloc
--disable-ipv6 Disable IPv6 support
--enable-dtrace Enable DTrace support
--enable-fd-setsize Set size of descriptor sets
Extensions:
--with-EXTENSION=shared[,PATH]
NOTE: Not all extensions can be build as 'shared'.
Example: --with-foobar=shared,/usr/local/foobar/
o Builds the foobar extension as shared extension.
o foobar package install prefix is /usr/local/foobar/
--disable-all Disable all extensions which are enabled by default
--disable-libxml Disable LIBXML support
--with-libxml-dir=DIR LIBXML: libxml2 install prefix
--with-openssl=DIR Include OpenSSL support (requires OpenSSL >= 1.0.1)
--with-kerberos=DIR OPENSSL: Include Kerberos support
--with-system-ciphers OPENSSL: Use system default cipher list instead of hardcoded value
--with-pcre-regex=DIR Include Perl Compatible Regular Expressions support.
DIR is the PCRE install prefix BUNDLED
--with-pcre-jit Enable PCRE JIT functionality
--without-sqlite3=DIR Do not include SQLite3 support. DIR is the prefix to
SQLite3 installation directory.
--with-zlib=DIR Include ZLIB support (requires zlib >= 1.0.9)
--with-zlib-dir=<DIR> Define the location of zlib install directory
--enable-bcmath Enable bc style precision math functions
--with-bz2=DIR Include BZip2 support
--enable-calendar Enable support for calendar conversion
--disable-ctype Disable ctype functions
--with-curl=DIR Include cURL support
--enable-dba Build DBA with bundled modules. To build shared DBA
extension use --enable-dba=shared
--with-qdbm=DIR DBA: QDBM support
--with-gdbm=DIR DBA: GDBM support
--with-ndbm=DIR DBA: NDBM support
--with-db4=DIR DBA: Oracle Berkeley DB 4.x or 5.x support
--with-db3=DIR DBA: Oracle Berkeley DB 3.x support
--with-db2=DIR DBA: Oracle Berkeley DB 2.x support
--with-db1=DIR DBA: Oracle Berkeley DB 1.x support/emulation
--with-dbm=DIR DBA: DBM support
--with-tcadb=DIR DBA: Tokyo Cabinet abstract DB support
--without-cdb=DIR DBA: CDB support (bundled)
--disable-inifile DBA: INI support (bundled)
--disable-flatfile DBA: FlatFile support (bundled)
--disable-dom Disable DOM support
--with-libxml-dir=DIR DOM: libxml2 install prefix
--with-enchant=DIR Include enchant support.
GNU Aspell version 1.1.3 or higher required.
--enable-exif Enable EXIF (metadata from images) support
--disable-fileinfo Disable fileinfo support
--disable-filter Disable input filter support
--with-pcre-dir FILTER: pcre install prefix
--enable-ftp Enable FTP support
--with-openssl-dir=DIR FTP: openssl install prefix
--with-gd=DIR Include GD support. DIR is the GD library base
install directory BUNDLED
--with-webp-dir=DIR GD: Set the path to libwebp install prefix
--with-jpeg-dir=DIR GD: Set the path to libjpeg install prefix
--with-png-dir=DIR GD: Set the path to libpng install prefix
--with-zlib-dir=DIR GD: Set the path to libz install prefix
--with-xpm-dir=DIR GD: Set the path to libXpm install prefix
--with-freetype-dir=DIR GD: Set the path to FreeType 2 install prefix
--enable-gd-native-ttf GD: Enable TrueType string function
--enable-gd-jis-conv GD: Enable JIS-mapped Japanese font support
--with-gettext=DIR Include GNU gettext support
--with-gmp=DIR Include GNU MP support
--with-mhash=DIR Include mhash support
--disable-hash Disable hash support
--without-iconv=DIR Exclude iconv support
--with-imap=DIR Include IMAP support. DIR is the c-client install prefix
--with-kerberos=DIR IMAP: Include Kerberos support. DIR is the Kerberos install prefix
--with-imap-ssl=DIR IMAP: Include SSL support. DIR is the OpenSSL install prefix
--with-interbase=DIR Include Firebird support. DIR is the Firebird base
install directory /opt/firebird
--enable-intl Enable internationalization support
--with-icu-dir=DIR Specify where ICU libraries and headers can be found
--disable-json Disable JavaScript Object Serialization support
--with-ldap=DIR Include LDAP support
--with-ldap-sasl=DIR LDAP: Include Cyrus SASL support
--enable-mbstring Enable multibyte string support
--disable-mbregex MBSTRING: Disable multibyte regex support
--disable-mbregex-backtrack
MBSTRING: Disable multibyte regex backtrack check
--with-libmbfl=DIR MBSTRING: Use external libmbfl. DIR is the libmbfl base
install directory BUNDLED
--with-onig=DIR MBSTRING: Use external oniguruma. DIR is the oniguruma install prefix.
If DIR is not set, the bundled oniguruma will be used
--with-mcrypt=DIR Include mcrypt support
--with-mysqli=FILE Include MySQLi support. FILE is the path
to mysql_config. If no value or mysqlnd is passed
as FILE, the MySQL native driver will be used
--enable-embedded-mysqli
MYSQLi: Enable embedded support
Note: Does not work with MySQL native driver!
--with-mysql-sock=SOCKPATH
MySQLi/PDO_MYSQL: Location of the MySQL unix socket pointer.
If unspecified, the default locations are searched
--with-oci8=DIR Include Oracle Database OCI8 support. DIR defaults to $ORACLE_HOME.
Use --with-oci8=instantclient,/path/to/instant/client/lib
to use an Oracle Instant Client installation
--with-odbcver=HEX Force support for the passed ODBC version. A hex number is expected, default 0x0350.
Use the special value of 0 to prevent an explicit ODBCVER to be defined.
--with-adabas=DIR Include Adabas D support /usr/local
--with-sapdb=DIR Include SAP DB support /usr/local
--with-solid=DIR Include Solid support /usr/local/solid
--with-ibm-db2=DIR Include IBM DB2 support /home/db2inst1/sqllib
--with-ODBCRouter=DIR Include ODBCRouter.com support /usr
--with-empress=DIR Include Empress support \$EMPRESSPATH
(Empress Version >= 8.60 required)
--with-empress-bcs=DIR
Include Empress Local Access support \$EMPRESSPATH
(Empress Version >= 8.60 required)
--with-birdstep=DIR Include Birdstep support /usr/local/birdstep
--with-custom-odbc=DIR Include user defined ODBC support. DIR is ODBC install base
directory /usr/local. Make sure to define CUSTOM_ODBC_LIBS and
have some odbc.h in your include dirs. f.e. you should define
following for Sybase SQL Anywhere 5.5.00 on QNX, prior to
running this configure script:
CPPFLAGS=\"-DODBC_QNX -DSQLANY_BUG\"
LDFLAGS=-lunix
CUSTOM_ODBC_LIBS=\"-ldblib -lodbc\"
--with-iodbc=DIR Include iODBC support /usr/local
--with-esoob=DIR Include Easysoft OOB support /usr/local/easysoft/oob/client
--with-unixODBC=DIR Include unixODBC support /usr/local
--with-dbmaker=DIR Include DBMaker support
--disable-opcache Disable Zend OPcache support
--disable-opcache-file Disable file based caching
--disable-huge-code-pages
Disable copying PHP CODE pages into HUGE PAGES
--enable-pcntl Enable pcntl support (CLI/CGI only)
--disable-pdo Disable PHP Data Objects support
--with-pdo-dblib=DIR PDO: DBLIB-DB support. DIR is the FreeTDS home directory
--with-pdo-firebird=DIR PDO: Firebird support. DIR is the Firebird base
install directory /opt/firebird
--with-pdo-mysql=DIR PDO: MySQL support. DIR is the MySQL base directory
If no value or mysqlnd is passed as DIR, the
MySQL native driver will be used
--with-zlib-dir=DIR PDO_MySQL: Set the path to libz install prefix
--with-pdo-oci=DIR PDO: Oracle OCI support. DIR defaults to \$ORACLE_HOME.
Use --with-pdo-oci=instantclient,prefix,version
for an Oracle Instant Client SDK.
For example on Linux with 11.2 RPMs use:
--with-pdo-oci=instantclient,/usr,11.2
With 10.2 RPMs use:
--with-pdo-oci=instantclient,/usr,10.2.0.4
--with-pdo-odbc=flavour,dir
PDO: Support for 'flavour' ODBC driver.
include and lib dirs are looked for under 'dir'.
'flavour' can be one of: ibm-db2, iODBC, unixODBC, generic
If ',dir' part is omitted, default for the flavour
you have selected will be used. e.g.:
--with-pdo-odbc=unixODBC
will check for unixODBC under /usr/local. You may attempt
to use an otherwise unsupported driver using the \"generic\"
flavour. The syntax for generic ODBC support is:
--with-pdo-odbc=generic,dir,libname,ldflags,cflags
When built as 'shared' the extension filename is always pdo_odbc.so
--with-pdo-pgsql=DIR PDO: PostgreSQL support. DIR is the PostgreSQL base
install directory or the path to pg_config
--without-pdo-sqlite=DIR
PDO: sqlite 3 support. DIR is the sqlite base
install directory BUNDLED
--with-pgsql=DIR Include PostgreSQL support. DIR is the PostgreSQL
base install directory or the path to pg_config
--disable-phar Disable phar support
--disable-posix Disable POSIX-like functions
--with-pspell=DIR Include PSPELL support.
GNU Aspell version 0.50.0 or higher required
--with-libedit=DIR Include libedit readline replacement (CLI/CGI only)
--with-readline=DIR Include readline support (CLI/CGI only)
--with-recode=DIR Include recode support
--disable-session Disable session support
--with-mm=DIR SESSION: Include mm support for session storage
--enable-shmop Enable shmop support
--disable-simplexml Disable SimpleXML support
--with-libxml-dir=DIR SimpleXML: libxml2 install prefix
--with-snmp=DIR Include SNMP support
--with-openssl-dir=DIR SNMP: openssl install prefix
--enable-soap Enable SOAP support
--with-libxml-dir=DIR SOAP: libxml2 install prefix
--enable-sockets Enable sockets support
--enable-sysvmsg Enable sysvmsg support
--enable-sysvsem Enable System V semaphore support
--enable-sysvshm Enable the System V shared memory support
--with-tidy=DIR Include TIDY support
--disable-tokenizer Disable tokenizer support
--enable-wddx Enable WDDX support
--with-libxml-dir=DIR WDDX: libxml2 install prefix
--with-libexpat-dir=DIR WDDX: libexpat dir for XMLRPC-EPI (deprecated)
--disable-xml Disable XML support
--with-libxml-dir=DIR XML: libxml2 install prefix
--with-libexpat-dir=DIR XML: libexpat install prefix (deprecated)
--disable-xmlreader Disable XMLReader support
--with-libxml-dir=DIR XMLReader: libxml2 install prefix
--with-xmlrpc=DIR Include XMLRPC-EPI support
--with-libxml-dir=DIR XMLRPC-EPI: libxml2 install prefix
--with-libexpat-dir=DIR XMLRPC-EPI: libexpat dir for XMLRPC-EPI (deprecated)
--with-iconv-dir=DIR XMLRPC-EPI: iconv dir for XMLRPC-EPI
--disable-xmlwriter Disable XMLWriter support
--with-libxml-dir=DIR XMLWriter: libxml2 install prefix
--with-xsl=DIR Include XSL support. DIR is the libxslt base
install directory (libxslt >= 1.1.0 required)
--enable-zip Include Zip read/write support
--with-zlib-dir=DIR ZIP: Set the path to libz install prefix
--with-pcre-dir ZIP: pcre install prefix
--with-libzip=DIR ZIP: use libzip
--enable-mysqlnd Enable mysqlnd explicitly, will be done implicitly
when required by other extensions
--disable-mysqlnd-compression-support
Disable support for the MySQL compressed protocol in mysqlnd
--with-zlib-dir=DIR mysqlnd: Set the path to libz install prefix
PEAR:
--with-pear=DIR Install PEAR in DIR [PREFIX/lib/php]
--without-pear Do not install PEAR
Zend:
--enable-maintainer-zts Enable thread safety - for code maintainers only!!
--disable-inline-optimization
If building zend_execute.lo fails, try this switch
--disable-zend-signals whether to enable zend signal handling
TSRM:
--with-tsrm-pth=pth-config
Use GNU Pth
--with-tsrm-st Use SGI's State Threads
--with-tsrm-pthreads Use POSIX threads (default)
Libtool:
--enable-shared=PKGS Build shared libraries default=yes
--enable-static=PKGS Build static libraries default=yes
--enable-fast-install=PKGS
Optimize for fast installation default=yes
--with-gnu-ld Assume the C compiler uses GNU ld default=no
--disable-libtool-lock Avoid locking (might break parallel builds)
--with-pic Try to use only PIC/non-PIC objects default=use both
--with-tags=TAGS Include additional configurations automatic
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
YACC The `Yet Another Compiler Compiler' implementation to use.
Defaults to the first program found out of: `bison -y', `byacc',
`yacc'.
YFLAGS The list of arguments that will be passed by default to $YACC.
This script will default YFLAGS to the empty string to avoid a
default value of `-d' given by some make applications.
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.