shell编程——if语句【转载】

时间:2023-03-08 17:40:57
shell编程——if语句【转载】

(2)shell编程——if语句_macg_新浪博客
http://blog.sina.com.cn/s/blog_6151984a0100ekl6.html

shell编程——if语句转载

if 语句格式
if 条件
then
Command
else
Command
fi 别忘了这个结尾
If语句忘了结尾fi
test.sh: line 14: syntax error: unexpected end of fi

if 的三种条件表达式
if
command
then

if
函数
then
命令执行成功,等于返回0 (比如grep ,找到匹配)
执行失败,返回非0 (grep,没找到匹配)
if [ expression_r_r_r ]
then
表达式结果为真,则返回0,if把0值引向then
if test expression_r_r_r
then
表达式结果为假,则返回非0,if把非0值引向then

[ ] && ——快捷if
[ -f "/etc/shadow" ] && echo "This computer uses shadow passwors"
&& 可以理解为then
如果左边的表达式为真则执行右边的语句

shell的if与c语言if的功能上的区别
shell if c语言if
0为真,走then
正好相反,非0走then
不支持整数变量直接if
必须:if [ i –ne 0 ]

但支持字符串变量直接if
if [ str ] 如果字符串非0
支持变量直接if
if (i )

=================================以command作为if 条件===================================

以多条command或者函数作为if 条件
echo –n “input:”
read user

if
多条指令,这些命令之间相当于“and”(与)
grep $user /etc/passwd >/tmp/null
who -u | grep $user
then 上边的指令都执行成功,返回值$?为0,0为真,运行then
echo "$user has logged"
else 指令执行失败,$?为1,运行else
echo "$user has not logged"
fi
# sh test.sh
input : macg
macg pts/0 May 15 15:55 . 2075 (192.168.1.100)
macg has logged

# sh test.sh
input : ddd
ddd has not logged

以函数作为if条件 (函数就相当于command,函数的优点是其return值可以自定义)
if
以函数作为if条件,
getyn
then 函数reture值0为真,走then
echo " your answer is yes"
else 函数return值非0为假,走else
echo "your anser is no"
fi

if command 等价于 command+if $?
$ vi testsh.sh
#!/bin/sh

if
cat 111-tmp.txt | grep ting1
then
echo found
else
echo "no found"
fi
$ vi testsh.sh
#!/bin/sh

cat 111-tmp.txt | grep ting1

if [ $? -eq 0 ]
then
echo $?
echo found
else
echo $?
echo "no found"
fi
$ sh testsh.sh
no found
$ sh testsh.sh
1
no found
$ vi 111-tmp.txt
that is 222file
thisting1 is 111file

$ sh testsh.sh
thisting1 is 111file
found
$ vi 111-tmp.txt
that is 222file
thisting1 is 111file

$ sh testsh.sh
thisting1 is 111file
0
found

========================================以条件表达式作为 if条件=============================

传统if 从句子——以条件表达式作为 if条件
if [ 条件表达式 ]
then
command
command
command
else
command
command
fi

条件表达式
文件表达式
if [ -f file ] 如果文件存在
if [ -d ... ] 如果目录存在
if [ -s file ] 如果文件存在且非空
if [ -r file ] 如果文件存在且可读
if [ -w file ] 如果文件存在且可写
if [ -x file ] 如果文件存在且可执行
整数变量表达式
if [ int1 -eq int2 ] 如果int1等于int2
if [ int1 -ne int2 ] 如果不等于
if [ int1 -ge int2 ] 如果>=
if [ int1 -gt int2 ] 如果>
if [ int1 -le int2 ] 如果<=
if [ int1 -lt int2 ] 如果<

字符串变量表达式
If [ $a = $b ] 如果string1等于string2
字符串允许使用赋值号做等号
if [ $string1 != $string2 ] 如果string1不等于string2
if [ -n $string ] 如果string 非空(非0),返回0(true)
if [ -z $string ] 如果string 为空
if [ $sting ] 如果string 非空,返回0 (和-n类似)

条件表达式引用变量要带$
if [ a = b ] ;then
echo equal
else
echo no equal
fi
[macg@machome ~]$ sh test.sh
input a:
5
input b:
5
no equal (等于表达式没比较$a和$b,而是比较和a和b,自然a!=b)
改正:
if [ $a = $b ] ;then
echo equal
else
echo no equal
fi
[macg@machome ~]$ sh test.sh
input a:
5
input b:
5
equal

-eq -ne -lt -nt只能用于整数,不适用于字符串,字符串等于用赋值号=
[macg@machome ~]$ vi test.sh
echo -n "input your choice:"
read var
if [ $var -eq "yes" ]
then
echo $var
fi
[macg@machome ~]$ sh -x test.sh
input your choice:
y
test.sh: line 3: test: y: integer expression_r_r_r expected
期望整数形式,即-eq不支持字符串

=放在别的地方是赋值,放在if [ ] 里就是字符串等于,shell里面没有==的,那是c语言的等于

无空格的字符串,可以加" ",也可以不加
[macg@machome ~]$ vi test.sh
echo "input a:"
read a
echo "input is $a"
if [ $a = 123 ] ; then
echo equal123
fi
[macg@machome ~]$ sh test.sh
input a:
123
input is 123
equal123

= 作为等于时,其两边都必须加空格,否则失效
等号也是操作符,必须和其他变量,关键字,用空格格开 (等号做赋值号时正好相反,两边不能有空格)
[macg@machome ~]$ vi test.sh

echo "input your choice:"
read var
if [ $var="yes" ]
then
echo $var
echo "input is correct"
else
echo $var
echo "input error"
fi
[macg@machome ~]$ vi test.sh

echo "input your choice:"
read var
if [ $var = "yes" ] 在等号两边加空格
then
echo $var
echo "input is correct"
else
echo $var
echo "input error"
fi
[macg@machome ~]$ sh test.sh
input your choice:
y
y
input is correct
[macg@machome ~]$ sh test.sh
input your choice:
n
n
input is correct
输错了也走then,都走then,为什么?
因为if把$var="yes"连读成一个变量,而此变量为空,返回1,则走else [macg@machome ~]$ sh test.sh
input your choice:
y
y
input error
[macg@machome ~]$ sh test.sh
input your choice:
no
no
input error
一切正常

If [ $ANS ] 等价于 if [ -n $ANS ]
如果字符串变量非空(then) , 空(else)
echo "input your choice:"
read ANS

if [ $ANS ]
then
echo no empty
else
echo empth
fi
[macg@machome ~]$ sh test.sh
input your choice: 回车

empth 说明“回车”就是空串
[macg@machome ~]$ sh test.sh
input your choice:
34
no empty

整数条件表达式,大于,小于,shell里没有> 和< ,会被当作尖括号,只有-ge,-gt,-le,lt
[macg@machome ~]$ vi test.sh

echo "input a:"
read a
if [ $a -ge 100 ] ; then
echo 3bit
else
echo 2bit
fi
[macg@machome ~]$ sh test.sh
input a:
123
3bit
[macg@machome ~]$ sh test.sh
input a:
20
2bit

整数操作符号-ge,-gt,-le,-lt, 别忘了加-
if test $a ge 100 ; then

[macg@machome ~]$ sh test.sh
test.sh: line 4: test: ge: binary operator expected
if test $a -ge 100 ; then

[macg@machome ~]$ sh test.sh
input a:
123
3bit

============================逻辑表达式=========================================

逻辑非 ! 条件表达式的相反
if [ ! 表达式 ]
if [ ! -d $num ] 如果不存在目录$num

逻辑与 –a 条件表达式的并列
if [ 表达式1 –a 表达式2 ]

逻辑或 -o 条件表达式的或
if [ 表达式1 –o 表达式2 ]

逻辑表达式
表达式与前面的= != -d –f –x -ne -eq -lt等合用
逻辑符号就正常的接其他表达式,没有任何括号( ),就是并列
if [ -z "$JHHOME" -a -d $HOME/$num ]
注意逻辑与-a与逻辑或-o很容易和其他字符串或文件的运算符号搞混了

最常见的赋值形式,赋值前对=两边的变量都进行评测
左边测变量是否为空,右边测目录(值)是否存在(值是否有效)

[macg@mac-home ~]$ vi test.sh
:
echo "input the num:"
read num
echo "input is $num"

if [ -z "$JHHOME" -a -d $HOME/$num ] 如果变量$JHHOME为空,且$HOME/$num目录存在
then
JHHOME=$HOME/$num 则赋值
fi

echo "JHHOME is $JHHOME"
-----------------------
[macg@mac-home ~]$ sh test.sh
input the num:
ppp
input is ppp
JHHOME is

目录-d $HOME/$num 不存在,所以$JHHOME没被then赋值
[macg@mac-home ~]$ mkdir ppp
[macg@mac-home ~]$ sh test.sh
input the num:
ppp
input is ppp
JHHOME is /home/macg/ppp

一个-o的例子,其中却揭示了”=”必须两边留空格的问题
echo "input your choice:"
read ANS

if [ $ANS="Yes" -o $ANS="yes" -o $ANS="y" -o $ANS="Y" ]
then
ANS="y"
else
ANS="n"
fi

echo $ANS
[macg@machome ~]$ sh test.sh
input your choice:
n
y
[macg@machome ~]$ sh test.sh
input your choice:
no
y
为什么输入不是yes,结果仍是y(走then)
因为=被连读了,成了变量$ANS="Yes",而变量又为空,所以走else了
[macg@machome ~]$ vi test.sh

echo "input your choice:"
read ANS echo "input your choice:"
read ANS

if [ $ANS = "Yes" -o $ANS = "yes" -o $ANS = "y" -o $ANS = "Y" ]
then
ANS="y"
else
ANS="n"
fi

echo $ANS
[macg@machome ~]$ sh test.sh
input your choice:
no
n
[macg@machome ~]$ sh test.sh
input your choice:
yes
y
[macg@machome ~]$ sh test.sh
input your choice:
y
y

===================以 test 条件表达式 作为if条件===================================

if test $num -eq 0 等价于 if [ $num –eq 0 ]

test 表达式,没有 [ ]
if test $num -eq 0
then
echo "try again"
else
echo "good"
fi

man test
[macg@machome ~]$ man test
[(1) User Commands [(1)

SYNOPSIS
test EXPRESSION
[ EXPRESSION ]

[-n] STRING
the length of STRING is nonzero -n和直接$str都是非0条件

-z STRING
the length of STRING is zero

STRING1 = STRING2
the strings are equal

STRING1 != STRING2
the strings are not equal

INTEGER1 -eq INTEGER2
INTEGER1 is equal to INTEGER2

INTEGER1 -ge INTEGER2
INTEGER1 is greater than or equal to INTEGER2

INTEGER1 -gt INTEGER2
INTEGER1 is greater than INTEGER2

INTEGER1 -le INTEGER2
INTEGER1 is less than or equal to INTEGER2

INTEGER1 -lt INTEGER2
INTEGER1 is less than INTEGER2

INTEGER1 -ne INTEGER2
INTEGER1 is not equal to INTEGER2

FILE1 -nt FILE2
FILE1 is newer (modification date) than FILE2

FILE1 -ot FILE2
FILE1 is older than FILE2

-b FILE
FILE exists and is block special

-c FILE
FILE exists and is character special

-d FILE
FILE exists and is a directory

-e FILE
FILE exists 文件存在

-f FILE
FILE exists and is a regular file 文件存在且是普通文件

-h FILE
FILE exists and is a symbolic link (same as -L)

-L FILE
FILE exists and is a symbolic link (same as -h)

-G FILE
FILE exists and is owned by the effective group ID

-O FILE
FILE exists and is owned by the effective user ID

-p FILE
FILE exists and is a named pipe

-s FILE
FILE exists and has a size greater than zero

-S FILE
FILE exists and is a socket

-w FILE
FILE exists and is writable

-x FILE
FILE exists and is executable

======================if简化语句=================================

最常用的简化if语句
&& 如果是“前面”,则“后面”
[ -f /var/run/dhcpd.pid ] && rm /var/run/dhcpd.pid 检查 文件是否存在,如果存在就删掉
|| 如果不是“前面”,则后面
[ -f /usr/sbin/dhcpd ] || exit 0 检验文件是否存在,如果存在就退出

用简化 if 和$1,$2,$3来检测参数,不合理就调用help
[ -z "$1" ] && help 如果第一个参数不存在(-z 字符串长度为0 )
[ "$1" = "-h" ] && help 如果第一个参数是-h,就显示help

例子
#!/bin/sh

[ -f "/etc/sysconfig/network-scripts/ifcfg-eth0" ] && rm -f /etc/sysconfig/network-scripts/ifcfg-eth0
cp ifcfg-eth0.bridge /etc/sysconfig/network-scripts/ifcfg-eth0

[ -f "/etc/sysconfig/network-scripts/ifcfg-eth1" ] && rm -f /etc/sysconfig/network-scripts/ifcfg-eth1
cp ifcfg-eth1.bridge /etc/sysconfig/network-scripts/ifcfg-eth1

[ -f "/etc/sysconfig/network-scripts/ifcfg-eth0:1" ] && rm -f /etc/sysconfig/network-scripts/ifcfg-eth0:1