尽管GNU/Linux并非无所不能，但确实能在很多时候提供免费、开放的解决方案。这两天我想做一个简谱，在网上搜索乐谱排版软件，发现了基于GPL协议的Lilypond软件。只不过Lilypond是用来做五线谱的。幸好，又找到剑桥大学 Silas S. Brown 编写的一个 jianpu-ly.py 脚本，通过调用Lilypond能够最终生成简谱。关于它的详细介绍请看这里。
该脚本支持的简谱语法规则如下：
- 音阶：1 2 3 4 5 6 7 1'
- 空拍：0
- 升、降音：#1 b2
- 低两个八度、低八度、中音、高八度、高两个八度：1,, 1, 1 1' 1''
- 六十四分、三十二分、十六分、八分、四分音符（一拍）：h1 d1 s1 q1 1
- 符点音符：s1. q1. 1.
- 半音符（两拍）：1 -
- 符点半音符（三拍）：1 - -
- 全音符（四拍）：1 - - -
- 拍子：4/4
- 大调：1=Bb
- 小调：6=F#
- 标题：title=采茶舞曲
- 三联音：3[ q1 q1 q1 ]
- 重复：R{ 1 1 1 } A{ 2 | 3 }
一个典型的简谱源文件如下：
title=标题
1=C
2/4 1 2 3 4 5 6 7 1'
将该文件存为jianpu.txt后，先调用jianpu-ly.py生成Lilypond输入文件：
jianpu-ly.py < jianpu.txt > jianpu.ly
然后调用lilypond程序，生成指定格式的乐谱文件。令人惊喜的是，不光可以排版出PDF、PS、PNG等格式的简谱，还可以生成midi文件，直接播放试听。可以用如下方式调用lilypond：
# 生成PDF文件、midi文件
lilypond jianpu.ly
# 生成png文件、midi文件
lilypond --png jianpu.ly
# 生成ps文件、midi文件
lilypond --ps jianpu.ly
可以用timidity直接播放生成的midi文件，或者将其转换为RIFF wav格式，再用普通的音频播放器来听。
timidity -Ow -o jianpu.wav jianpu.midi
为了将上述几个命令自动化，方便使用，我编写了一个bash脚本make_jianpu.sh，代码如下：
#!/bin/bash script_name="make_jianpu.sh"
script_usage=$(cat <<EOF
make_jianpu.sh [OPTIONS] JIANPU.txt
EOF
)
script_function=$(cat <<EOF
Batch convertion of a jianpu into Lilypond script then into pdf, png, midi and wav
EOF
)
script_doc=$(cat <<EOF
-h Display this help.
EOF
)
script_examples=$(cat <<EOF
EOF
)
state_prefix="==="
warning_prefix="***"
error_prefix="!!!" function display_help() {
if [ -n "$script_usage" ]; then
echo -e "Usage: $script_usage"
fi if [ -n "$script_function" ]; then
echo -e "$script_function"
fi if [ -n "$script_doc" ] ; then
echo -e "\n$script_doc"
fi
} while getopts ":hr:" opt; do
case $opt in
h ) display_help
exit ;;
\? ) display_help
exit ;;
esac
done
shift $(($OPTIND - )) jianpu_txt="$1" # Clear old generated files
if [ -e "${jianpu_txt%txt}ly" ]; then
rm "${jianpu_txt%txt}ly"
fi if [ -e "${jianpu_txt%txt}pdf" ]; then
rm "${jianpu_txt%txt}pdf"
fi if [ -e "${jianpu_txt%txt}png" ]; then
rm "${jianpu_txt%txt}png"
fi if [ -e "${jianpu_txt%txt}midi" ]; then
rm "${jianpu_txt%txt}midi"
fi if [ -e "${jianpu_txt%txt}wav" ]; then
rm "${jianpu_txt%txt}wav"
fi if [ -e "$jianpu_txt" ]; then
jianpu-ly.py < "$jianpu_txt" > "${jianpu_txt%txt}ly" if [ -e "${jianpu_txt%txt}ly" ]; then
# Generate pdf file
lilypond "${jianpu_txt%txt}ly" if [ -e "${jianpu_txt%txt}pdf" ]; then
echo "简谱pdf文件生成成功！" # Generate png file
lilypond --png "${jianpu_txt%txt}ly" if [ -e "${jianpu_txt%txt}png" ]; then
echo "简谱图片文件生成成功！" # Generate wav file from midi
if [ -e "${jianpu_txt%txt}midi" ]; then
echo "midi文件生成成功！" timidity -Ow -o "${jianpu_txt%txt}wav" "${jianpu_txt%txt}midi" if [ -e "${jianpu_txt%txt}wav" ]; then
echo "wav文件生成成功！"
else
echo "无法生成wav文件，请检查简谱语法错误！"
fi
else
echo "无法生成midi文件，请检查简谱语法错误！"
fi
else
echo "无法生成简谱图片文件，请检查简谱语法错误！"
fi
else
echo "无法生成PDF文件，请检查简谱语法错误！"
fi
else
echo "无法生成ly文件，请检查简谱语法错误！"
fi
else
echo "无法找到输入文件：$jianpu_txt！"
fi
此外，我在使用的过程中发现，若使用默认的Lilypond设置，虽然能够生成正确的midi文件，但却无法排版出升、降与还原号（accidentals）。经过一番试探，发现只要在/usr/share/lilypond/2.14.2/ly/engraver-init.ly文件中第168行添加：
\consists "Accidental_engraver"
便可以解决该问题。这是因为，经jianpu-ly.py脚本转换生成的Lilypond文件基于的是RhythmicStaff context。而engraver-init.ly中的默认配置并未包括对accidentals的“雕刻”（engrave）。所以，需要手动加上。
至此，用于简谱排版的工具已经俱备。我试着编排了《博基上校进行曲》片段如下。大家可以体验一下Lilypond的效果。
源文件：
title=博基上校进行曲
1=C
2/4 q1' q0 q7. s6 q5 q3 q1 q3 q5 s5 s6 q5 s5 s6 5 - R{ q5 q3 0 q0 q3 q4 q5 3' 3' 1' - q5 q3 0 q0 q3 q4 q3 5 5 4 - q4 q2 0 }
A{ q0 q2 q3 q4 q5 q3 0 q0 q3 q4 q3 q2 5 q3 q#4 2 q6 5 ( - 5 ) - |
q0 q6 q7 q6 } q1' q5 0 q0 q5 q4 q3 q2 6 q2 q7, 5 q7, 1 ( - 1 ) q3 q3 1'. q7 s6 s#5 q6 q5 q4 3 ( - q3 ) q3 q4 q3 6 q#5. s6 1' q6. s1' #2' ( - #2' ) 6 3'. q2' s1' s7 q6 q#5. s6 2. q4 q6 q0 s1' s7 s1' s2' q3' q0 q7. s1' 6 ( - 6 ) q3 q3 1'. q7 s6 s#5 q6 q5 q4 3 ( - q3 ) q3 q4 q3 6 q#5. s6 1' q6. s1' #2' ( - #2' ) 6 3'. q2' s1' s7 q6 q#5. s6 2. q4 q6 q0 s1' s7 s1' s2' q3' q0 q7. s1' 6 ( - 6 ) 5-> \ff
简谱：
附jianpu-ly.py源码如下：
#!/usr/bin/env python2 # Jianpu (numbered musical notaion) for Lilypond
# v1.158 (c) 2012-2019 Silas S. Brown # This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version. # This program is distributed in the hope that it will be ueful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details. # Homepage: http://people.ds.cam.ac.uk/ssb22/mwrhome/jianpu-ly.py
# Git repository: https://github.com/ssb22/jianpu-ly
# or on GitLab: https://gitlab.com/ssb22/jianpu-ly
# or Bitbucket: https://bitbucket.org/ssb22/jianpu-ly # (The following doc string's format is fixed, see --html)
r"""Run jianpu-ly < text-file > ly-file (or jianpu-ly text-files > ly-file)
Text files are whitespace-separated and can contain:
Scale going up: 1 2 3 4 5 6 7 1'
Accidentals: 1 #1 2 b2 1
Octaves: 1,, 1, 1 1' 1''
Shortcuts for 1' and 2': 8 9
Semiquaver, quaver, crotchet (16/8/4th notes): s1 q1 1
Dotted versions of the above (50% longer): s1. q1. 1.
Demisemiquaver, hemidemisemiquaver (32/64th notes): d1 h1
Minims (half notes) use dashes: 1 -
Dotted minim: 1 - -
Semibreve (whole note): 1 - - -
Time signature: 4/4
Time signature with quaver anacrusis (8th-note pickup): 4/4,8
Key signature (major): 1=Bb
Key signature (minor): 6=F#
Lyrics: L: here are the syl- la- bles (all on one line)
Lyrics (verse 1): L: 1. Here is verse one
Lyrics (verse 2): L: 2. Here is verse two
Hanzi lyrics (auto space): H: hanzi (with or without spaces)
Lilypond headers: title=the title (on a line of its own)
Multiple movements: NextScore
Prohibit page breaks until end of this movement: OnePage
Add a Western staff doubling the jianpu: WithStaff
Tuplets: 3[ q1 q1 q1 ]
Da capo: 1 1 Fine 1 1 1 1 1 1 DC
Repeat (with alternate endings): R{ 1 1 1 } A{ 2 | 3 }
Short repeats (percent): R4{ 1 2 }
Ties (like Lilypond's, if you don't want dashes): 1 ~ 1
Slurs (like Lilypond's): 1 ( 2 )
Dynamics (applies to previous note): \p \mp \f
Other 1-word Lilypond \ commands: \fermata \> \! \( \) etc
Other Lilypond code: LP: (block of code) :LP (each delimeter at start of its line)
""" import sys,os,re,string
if not sys.version_info[0]==2:
sys.stderr.write("Sorry, jianpu-ly cannot run on Python "+repr(sys.version_info[0])+"\nPlease use Python 2.x\n")
sys.exit(1) def all_scores_start(staff_size = 20):
# staff_size is the 5-line size in points; jianpu is smaller
return r"""\version "2.12.2"
#(set-global-staff-size %d) %% un-comment the next line to remove Lilypond tagline:
%% \header { tagline="" } \pointAndClickOff \paper {
print-all-headers = ##t %% allow per-score headers %% un-comment the next line for A5:
%% #(set-default-paper-size "a5" ) %% un-comment the next line for no page numbers:
%% print-page-number = ##f %% un-comment the next 3 lines for a binding edge:
%% two-sided = ##t
%% inner-margin = 20\mm
%% outer-margin = 10\mm %% un-comment the next line for a more space-saving header layout:
%% scoreTitleMarkup = \markup { \center-column { \fill-line { \magnify #1.5 { \bold { \fromproperty #'header:dedication } } \magnify #1.5 { \bold { \fromproperty #'header:title } } \fromproperty #'header:composer } \fill-line { \fromproperty #'header:instrument \fromproperty #'header:subtitle \smaller{\fromproperty #'header:subsubtitle } } } } #(define fonts
(set-global-fonts
#:music "emmentaler"
#:brace "emmentaler"
#:roman "SimHei"
#:sans "sans-serif"
#:typewriter "WenQuanYi Zen Hei Mono"
#:factor (/ staff-height pt 20)
))
}
""" % staff_size def score_start():
ret = "\\score {\n"
if midi: ret += "\\unfoldRepeats\n"
ret += r"<< "
if not midi: ret += ("\\override Score.BarNumber #'break-visibility = #end-of-line-invisible\n\\override Score.BarNumber #'Y-offset = -1\n\\set Score.barNumberVisibility = #(every-nth-bar-number-visible %d)" % bar_number_every)
return ret
bar_number_every = 5 # TODO customise? (anyway don't leave it numbering at start of system, doesn't work well in jianpu+lyrics) def score_end(**headers):
ret = ">>\n"
if headers:
# since about Lilypond 2.7, music must come
# before the header block if it's per-score
ret += r"\header{"+'\n'
for k,v in headers.items(): ret+=k+'="'+v+'"\n'
ret += "}\n"
if midi: ret += r"\midi { \context { \Score tempoWholesPerMinute = #(ly:make-moment 170 4)}}" # TODO: make this customisable (and/or check how to print BPMs in jianpu)
else: ret += r"\layout{}"
return ret + " }" tempCount = 0
def jianpu_voice_start(voiceName="tmp"):
stemLenFrac = "" # unless overridden to 0.5 below
if voiceName=="tmp": # make it unique just in case
global tempCount
voiceName += str(tempCount) ; tempCount += 1
elif maxBeams >= 2: stemLenFrac = "0.5" # sometimes needed if the semiquavers occur in isolation rather than in groups (TODO do we need to increase this for 3+ beams in some cases?)
return r"""\new Voice="%s" {
\override Beam #'transparent = ##f %% (needed for LilyPond 2.18 or the above switch will also hide beams)
\override Stem #'direction = #DOWN
\override Stem #'length-fraction = #%s
\override Beam #'beam-thickness = #0.1
\override Beam #'length-fraction = #0.5
\override Voice.Rest #'style = #'neomensural %% this size tends to line up better (we'll override the appearance anyway)
\override Accidental #'font-size = #-4
\override Tie #'staff-position = #2.5
\override TupletBracket #'bracket-visibility = ##t
\tupletUp
\set Voice.chordChanges = ##t %% 2.19 bug workaround
%%} """ % (voiceName,stemLenFrac) # chordChanges: This is to work around a bug in LilyPond 2.19.82. \applyOutput docs say "called for every layout object found in the context Context at the current time step" but 2.19.x breaks this by calling it for ALL contexts in the current time step, hence breaking our WithStaff by applying our jianpu numbers to the 5-line staff too. Obvious workaround is to make our function check that the context it's called with matches our jianpu voice, but I'm not sure how to do this other than by setting a property that's not otherwise used, which we can test for in the function. So I'm 'commandeering' the "chordChanges" property (there since at least 2.15 and used by Lilypond only when it's in chord mode, which we don't use, and if someone adds a chord-mode staff then it won't print noteheads anyway): we will substitute jianpu numbers for noteheads only if chordChanges = #t.
def jianpu_staff_start(voiceName="jianpu"):
# (we add "BEGIN JIANPU STAFF" and "END JIANPU STAFF" comments to make it easier to copy/paste into other Lilypond files)
return r"""
%% === BEGIN JIANPU STAFF ===
\new RhythmicStaff \with {
\consists "Accidental_engraver"
%% Get rid of the stave but not the barlines.
%% This changes between Lilypond versions.
%% \remove Staff_symbol_engraver %% worked pre-2.18, but 2.18 results in missing barlines (adding Barline_engraver won't help). Do this instead:
\override StaffSymbol #'line-count = #0 %% tested in 2.15.40, 2.16.2, 2.18.0 and 2.18.2
\override BarLine #'bar-extent = #'(-2 . 2) %% LilyPond 2.18: please make barlines as high as the time signature even though we're on a RhythmicStaff (2.16 and 2.15 don't need this although its presence doesn't hurt; Issue 3685 seems to indicate they'll fix it post-2.18)
}
{ """+jianpu_voice_start(voiceName)+r"""
\override Staff.TimeSignature #'style = #'numbered
\override Staff.Stem #'transparent = ##t
"""
def jianpu_staff_end(): return "} }\n% === END JIANPU STAFF ===\n" # \bar "|." is added separately if there's not a DC etc
def midi_staff_start(voiceName="midi"):
return r"""
%% === BEGIN MIDI STAFF ===
\new Staff { \new Voice="%s" {""" % (voiceName,)
def midi_staff_end(): return "} }\n% === END MIDI STAFF ===\n"
def western_staff_start(voiceName="5line"):
return r"""
%% === BEGIN 5-LINE STAFF ===
\new Staff { \new Voice="%s" {
#(set-accidental-style 'modern-cautionary)
\override Staff.TimeSignature #'style = #'numbered
\set Voice.chordChanges = ##f %% for 2.19.82 bug workaround
""" % (voiceName,)
def western_staff_end(): return "} }\n% === END 5-LINE STAFF ===\n" lyricsPtr = 0
def lyrics_start(voiceName="jianpu"):
global lyricsPtr ; lyricsPtr += 1 # TODO: encapsulate
return r'\new Lyrics = "I%s" \lyricmode { { ' % (str(lyricsPtr).translate((string.letters*5)[:256]))
def lyrics_end(): return "} }" dashes_as_ties = True # Implement dash (-) continuations as invisible ties rather than rests; sometimes works better in awkward beaming situations
use_rest_hack = True # Implement short rests as notes (and if there are lyrics, creates temporary voices so the lyrics miss them); sometimes works better for beaming (at least in 2.15, 2.16 and 2.18)
if '--noRestHack' in sys.argv: # TODO: document
use_rest_hack=False ; sys.argv.remove('--noRestHack')
assert not (use_rest_hack and not dashes_as_ties), "This combination has not been tested" def errExit(msg): sys.stderr.write("ERROR: "+msg+"\n"),sys.exit(1) class notehead_markup:
def __init__(self):
self.defines_done = {} ; self.initOneScore()
def initOneScore(self):
self.barLength = 64 ; self.beatLength = 16 # in 64th notes
self.barPos = self.startBarPos = self.inBeamGroup = self.lastNBeams = self.onePage = self.withStaff = 0
self.current_accidentals = {}
self.barNo = 1
self.tuplet = (1,1)
self.last_figure = None ; self.last_was_rest = False
self.notesHad = []
def endScore(self):
if not self.barPos == self.startBarPos: errExit("Incomplete bar at end of score %d (pos %d, should be %d)" % (scoreNo,self.barPos,self.startBarPos))
def setTime(self,num,denom):
self.barLength = 64*num/denom
if denom>4 and num%3==0: self.beatLength = 24 # compound time
else: self.beatLength = 16
def setAnac(self,denom,dotted):
self.barPos = self.barLength-64/denom
if dotted: self.barPos -= 64/denom/2
if not self.barPos: errExit("Anacrusis should be shorter than bar in score %d" % scoreNo)
self.startBarPos = self.barPos
def __call__(self,figure,nBeams,dot,octave,accidental):
# figure is '1'-'7' or '0' or '-'
# nBeams is 0, 1, 2 .. etc (number of beams for this note)
# dot is "" or "." (dotted length)
# octave is "", "'", "''", "," or ",,"
# accidental is "", "#", "b"
self.notesHad.append(figure)
names = {'':'nought',
'':'one',
'':'two',
'':'three',
'':'four',
'':'five',
'':'six',
'':'seven',
'-':'dash'}
placeholders = {
# for accidentals and word-fitting to work
# (we make them relative to the actual key later
# so that MIDI pitches are correct)
'':'r',
'':'c',
'':'d',
'':'e',
'':'f',
'':'g',
'':'a',
'':'b',
'-':'r'}
placeholder_note = placeholders[figure]
invisTieLast = dashes_as_ties and self.last_figure and figure=="-" and not self.last_was_rest
self.last_was_rest = (figure=='' or (figure=='-' and self.last_was_rest))
name = names[figure]
if invisTieLast:
figure += self.last_figure
name += names[self.last_figure]
placeholder_note = placeholders[self.last_figure]
octave = self.last_octave # for MIDI or 5-line
accidental = self.last_accidental # ditto
self.last_figure = figure[-1]
self.last_octave = octave
self.last_accidental = accidental
if figure not in self.defines_done and not midi and not western:
# Define a notehead graphical object for the figure
self.defines_done[figure] = "note-"+name
if figure.startswith("-"):
figure2=u"\u2013".encode('utf-8')
else: figure2 = figure
ret = """#(define (%s grob grob-origin context)
(if (and (eq? (ly:context-property context 'chordChanges) #t)
(or (grob::has-interface grob 'note-head-interface)
(grob::has-interface grob 'rest-interface)))
(begin
(ly:grob-set-property! grob 'stencil
(grob-interpret-markup grob
(make-lower-markup 0.5 (make-bold-markup "%s")))))))
""" % (self.defines_done[figure],figure2)
# TODO: chords? Could have something like
# (make-bold-markup (make-center-column-markup '("1" "3")))
# but would then need to take over accidentals from
# Lilypond, + make sure all notes aligned correctly
# (+ Tie's overriden position may need adjusting)
else: ret = ""
if self.barPos==0 and self.barNo > 1:
ret += "| " # barline in Lilypond file: not strictly necessary but may help readability
if self.onePage and not midi: ret += r"\noPageBreak "
ret += "%{ bar "+str(self.barNo)+": %} "
if not octave in self.current_accidentals: self.current_accidentals[octave] = [""]*7
if figure=="-" or (''<=figure<='' and not accidental==self.current_accidentals[octave][int(figure)-1]) and nBeams > self.lastNBeams: leftBeams = nBeams # beam needs to fit under the new accidental (or the dash which might be slightly to the left of where digits are), but if it's no more than last note's beams then we'll hang it only if in same beat. (TODO: the current_accidentals logic may need revising if other accidental styles are used, e.g. modern-cautionary, although then would need to check anyway if our \consists "Accidental_engraver" is sufficient)
# TODO: if figure=="0" then that might be typeset a bit to the left as well (because it's also a rest), however extending the line TOO far left in this case could be counterproductive
elif self.inBeamGroup:
if nBeams < self.lastNBeams: leftBeams = nBeams
else: leftBeams = self.lastNBeams
else: leftBeams = 0
if leftBeams: assert nBeams, "following logic assumes if (leftBeams or nBeams) == if nBeams"
aftrlast0 = ""
if not nBeams and self.inBeamGroup:
if not self.inBeamGroup=="restHack":
aftrlast0 = "] "
self.inBeamGroup = 0
if nBeams and not midi and not western: # must set these unconditionally regardless of what we think their current values are (Lilypond's own beamer can change them from note to note)
# TODO: is there any version of Lilypond that will need this lot done even if leftBeams==nBeams==0 ?
ret += (r"\set stemLeftBeamCount = #%d"+"\n") % leftBeams
ret += (r"\set stemRightBeamCount = #%d"+"\n") % nBeams
if ''<=figure<='': self.current_accidentals[octave][int(figure)-1] = accidental
inRestHack = 0
if not midi and not western:
if ret: ret = ret.rstrip()+"\n" # try to keep the .ly code vaguely readable
ret += r" \applyOutput #'Voice #"+self.defines_done[figure]+" "
if placeholder_note == "r" and use_rest_hack and nBeams:
placeholder_note = "c"
# C to work around diagonal-tail problem with
# some isolated quaver rests in some Lilypond
# versions (usually at end of bar); new voice
# so lyrics miss it as if it were a rest:
if has_lyrics and not self.withStaff: # (OK if self.withStaff: lyrics will be attached to that instead)
ret = jianpu_voice_start() + ret
inRestHack = 1
if self.inBeamGroup and not self.inBeamGroup=="restHack": aftrlast0 = "] "
ret += placeholder_note
ret += {"":"", "#":"is", "b":"es"}[accidental]
if not placeholder_note=="r": ret += {"":"'","'":"''","''":"'''",",":"",",,":","}[octave] # for MIDI + Western, put it so no-mark starts near middle C
length = 4 ; b = 0 ; toAdd = 16 # crotchet
while b < nBeams: b,length,toAdd = b+1,length*2,toAdd/2
if dot: toAdd += toAdd/2
ret += ("%d" % length) + dot
if nBeams and (not self.inBeamGroup or self.inBeamGroup=="restHack" or inRestHack) and not midi and not western:
# We need the above stemLeftBeamCount, stemRightBeamCount override logic to work even if we're an isolated quaver, so do this:
ret += '['
self.inBeamGroup = 1
if not self.tuplet[0]==self.tuplet[1]:
toAdd = 1.0*toAdd*self.tuplet[0]/self.tuplet[1] # and hope it rounds OK (otherwise should get barcheck fail)
self.barPos += toAdd
# sys.stderr.write(accidental+figure+octave+dot+"/"+str(nBeams)+"->"+str(self.barPos)+" ") # if need to see where we are
if self.barPos > self.barLength: errExit("(notesHad=%s) barcheck fail: note crosses barline at \"%s\" with %d beams (%d skipped from %d to %d, bypassing %d), scoreNo=%d barNo=%d (but the error could be earlier)" % (' '.join(self.notesHad),figure,nBeams,toAdd,self.barPos-toAdd,self.barPos,self.barLength,scoreNo,self.barNo))
if self.barPos%self.beatLength == 0 and self.inBeamGroup: # (self.inBeamGroup is set only if not midi/western)
# jianpu printouts tend to restart beams every beat
# (but if there are no beams running anyway, it occasionally helps typesetting to keep the logical group running, e.g. to work around bugs involving beaming a dash-and-rest beat in 6/8) (TODO: what if there's a dash-and-rest BAR? [..]-notated beams don't usually work across barlines
ret += ']'
self.inBeamGroup = 0 # DON'T reset lastNBeams here (needed for start-of-group accidental logic)
elif inRestHack and self.inBeamGroup:
ret += ']'
self.inBeamGroup = 'restHack'
self.lastNBeams = nBeams
if self.barPos == self.barLength:
self.barPos = 0 ; self.barNo += 1
self.current_accidentals = {}
# Octave dots:
if not midi and not western and not invisTieLast:
# Tweak the Y-offset, as Lilypond occasionally puts it too far down:
if not nBeams: ret += {",":r"-\tweak #'Y-offset #-1.2 ",
",,":r"-\tweak #'Y-offset #1 "}.get(octave,"")
ret += {"":"",
"'":"^.",
"''":r"-\tweak #'X-offset #0.3 ^\markup{\bold :}",
",":r"-\tweak #'X-offset #0.6 _.",
",,":r"-\tweak #'X-offset #0.3 _\markup{\bold :}"}[octave]
if invisTieLast:
if midi or western: b4last, aftrlast = "", " ~"
else: b4last,aftrlast = r"\once \override Tie #'transparent = ##t \once \override Tie #'staff-position = #0 "," ~"
else: b4last,aftrlast = "",""
if inRestHack: ret += " } "
return b4last,aftrlast0+aftrlast,ret notehead_markup = notehead_markup() def parseNote(word):
figure = None
for fig in list("01234567-"):
if fig in word:
figure = fig ; break
if "." in word: dot="."
else: dot=""
if "q" in word: nBeams=1
elif "s" in word: nBeams=2
elif "d" in word: nBeams=3
elif "h" in word: nBeams=4
elif "\\" in word: nBeams=len(word.split("\\"))-1 # requested by a user who found British note-length names hard to remember; won't work if the \ is placed at the start, as that'll be a Lilypond command, so to save confusion we won't put this in the docstring
else: nBeams=0
octave = ""
for o in ["''","'",",,",","]:
if o in word:
octave = o ; break
if not figure and not "," in octave and not octave=="''":
if "" in word: # 8 = 1' 8' = 1''
figure = "" ; octave += "'"
elif "" in word: # 9 = 2' 9' = 2''
figure = "" ; octave += "'"
accidental = ""
for acc in ["#","b"]:
if acc in word:
accidental = acc ; break
return figure,nBeams,dot,octave,accidental if "--html" in sys.argv or "--markdown" in sys.argv:
# Write an HTML or Markdown version of the doc string
def htmlify(l):
if "--html" in sys.argv:
return l.replace("&","&").replace("<","<").replace(">",">")
else: return l
inTable = 0 ; justStarted=1
for line in __doc__.split("\n"):
if not line.strip(): continue
if ":" in line and line.split(":",1)[1].strip():
toGet,shouldType = line.split(":",1)
if not inTable:
if "--html" in sys.argv:
print "<table border>" # "<tr><th>To get:</th><th>Type:</th></tr>"
else: print
inTable = 1
if re.match(r".*[A-Za-z]\)$",shouldType):
shouldType,note = shouldType.rsplit("(",1)
note = " ("+note
else: note = ""
if "--html" in sys.argv: print "<tr><td>"+toGet.strip()+"</td><td><kbd>"+shouldType.strip()+"</kbd>"+note+"</td>"
else: print toGet.strip()+": `"+shouldType.strip()+"`"+note+"\n"
else:
if "--markdown" in sys.argv: print
elif inTable: print "</table>"
elif not justStarted: print "<br>"
inTable=justStarted=0
print htmlify(line)
if inTable and "--html" in sys.argv: print "</table>"
raise SystemExit
inDat = []
for f in sys.argv[1:]:
try: inDat.append(open(f).read())
except: errExit("Unable to read file "+f)
if not inDat:
if sys.stdin.isatty():
sys.stderr.write(__doc__)
raise SystemExit
inDat=[sys.stdin.read()] def fix_fullwidth(t):
utext = t.decode('utf-8')
r = []
for c in utext:
if 0xff01<=ord(c)<=0xff5e: r.append(unichr(ord(c)-0xfee0))
elif c==unichr(0x201a): r.append(",") # sometimes used as comma (incorrectly)
elif c==unichr(0xff61): r.append(".")
else: r.append(c)
return u"".join(r).encode('utf-8') def intor0(w):
try: return int(w)
except: return 0 for i in xrange(len(inDat)):
if inDat[i].startswith('\xef\xbb\xbf'):
inDat[i] = inDat[i][3:]
if inDat[i].startswith(r'\version'): errExit("jianpu-ly does not READ Lilypond code.\nPlease see the instructions.") inDat = " NextScore ".join(inDat) def getLY(score):
lyrics = "" ; headers = {}
notehead_markup.initOneScore()
out = [] ; maxBeams = 0 ; need_final_barline = 0
repeatStack = [] ; lastPtr = 0
escaping = inTranspose = 0
for line in score.split("\n"):
line = fix_fullwidth(line).strip()
if line.startswith("LP:"):
# Escaped LilyPond block. Thanks to James Harkins for this suggestion.
# (Our internal barcheck does not understand code in LP blocks, so keep it to complete bars.)
# E.g. for multibar rests:
# LP:
# \compressFullBarRests \override MultiMeasureRest #'expand-limit = #1
# R1*5
# :LP
escaping = 1
if len(line)>3: out.append(line[3:]) # remainder of current line
elif line.startswith(":LP"):
escaping = 0 # TODO: and process the rest of the line? (assume on line of own for now)
elif escaping:
out.append(line)
elif not line: pass
elif line.startswith("L:") or line.startswith("H:"):
# lyrics
do_hanzi_spacing = line.startswith("H:")
line = line[2:].strip()
lyrics += lyrics_start()
toAdd = ""
if line and '' <= line[0] <= '' and (line[1]=='.' or line.decode('utf-8')[1]==u"\uff0e"):
# a verse number
toAdd = r'\set stanza = #"%s." ' % line[:1]
if line[1]=='.': line=line[2:]
else: line=line[4:] # for utf-8 full-width dot
line = line.strip()
if do_hanzi_spacing: # this is not 100% perfect...
l2 = [r"\override LyricText #'self-alignment-X = #LEFT "] # for overhanging commas etc to work
if toAdd:
l2.append(toAdd) ; toAdd = ""
needSpace = 0
for c in list(line.decode('utf-8')):
if needSpace and (0x4e00 <= ord(c) < 0xa700 or c in u"\u2018\u201c"):
l2.append(' ') ; needSpace = 0
if c in u"\u2018\u201c":
# we're just about to have an open quote - this needs to hang left. Try:
l2.append(r"\once \override LyricText #'self-alignment-X = #CENTER ") # or RIGHT if there's no punctuation after
if 0x4e00 <= ord(c) < 0xa700:
needSpace=1
l2.append('\markup{\small{')
l2.append(c)
if 0x4e00 <= ord(c) < 0xa700:
l2.append('}}')
line = u"".join(l2).encode('utf-8')
lyrics += toAdd+line.replace(" -- "," --\n")+" "+lyrics_end()+" "
elif line.replace(' =','=').split()[0].find('=') >= 2:
# not (e.g.) 1=C, so assume it's a Lilypond header
hName,hValue = line.split("=",1)
headers[hName.strip()] = hValue.strip()
else:
for word in line.split():
if '=' in word: # e.g. 1=C; mark
# Must use \transpose because \transposition doesn't always work.
# However, don't use \transpose if printing - it adds extra accidentals to the rhythm staff.
# So we have to do separate runs of \layout and \midi (hence the outer loop).
if midi or western:
if inTranspose: out.append('}')
if word[0]=="": transposeFrom = "a"
else: transposeFrom = "c"
transposeTo = word[word.index('=')+1:].replace("#","is").replace("b","es").lower()
if midi and transposeTo[0] in "gab": transposeTo += ','
out.append(r"\transpose c "+transposeTo+r" { \key c \major ") # so that MIDI or Western pitches are correct
inTranspose = 1
else: out.append(r'\mark \markup{%s}' % word.replace("b",r"\flat").replace("#",r"\sharp"))
elif '/' in word: # time signature
if ',' in word: # anacrusis
word,anac = word.split(",",1)
else: anac=""
out.append(r'\time '+word)
num,denom = word.split('/')
notehead_markup.setTime(int(num),int(denom))
if anac:
if anac.endswith("."): # e.g. 2.
a2 = anac[:-1] ; anacDotted = 1
else: a2,anacDotted = anac,0
notehead_markup.setAnac(int(a2),anacDotted)
out.append(r'\partial '+anac)
elif word.startswith("\\") or word in ["~","(",")"]:
out.append(word) # Lilypond command, \p etc
elif word=="OnePage":
if notehead_markup.onePage: sys.stderr.write("WARNING: Duplicate OnePage, did you miss out a NextScore?\n")
notehead_markup.onePage=1
elif word=="WithStaff":
if notehead_markup.withStaff: sys.stderr.write("WARNING: Duplicate WithStaff, did you miss out a NextScore?\n")
notehead_markup.withStaff=1
elif word=="R{":
repeatStack.append((1,0,0))
out.append(r'\repeat volta 2 {')
elif word.startswith("R") and word.endswith("{"):
times = int(word[1:-1])
repeatStack.append((1,notehead_markup.barPos,times-1))
out.append(r'\repeat percent %d {' % times)
elif word=="}":
numBraces,oldBarPos,multiplier = repeatStack.pop()
out.append("}"*numBraces)
# Re-synchronise so bar check still works if percent is less than a bar:
newBarPos = notehead_markup.barPos
while newBarPos < oldBarPos: newBarPos += notehead_markup.barLength
# newBarPos-oldBarPos now gives the remainder (mod barLength) of the percent section's length
notehead_markup.barPos = (notehead_markup.barPos + (newBarPos-oldBarPos)*multiplier) % notehead_markup.barLength
# TODO: update barNo also (but it's used only for error reports)
elif word=="A{":
repeatStack.append((2,0,0))
out.append(r'\alternative { {')
elif word=="|":
if not (repeatStack and repeatStack[-1][0]==2):
sys.stderr.write("| should be in an A{ .. } block (scoreNo=%d barNo=%d)" % (scoreNo,notehead_markup.barNo))
out.append("} {")
elif word.endswith('[') and intor0(word[:-1]):
# tuplet start, e.g. 3[
fitIn = int(word[:-1])
i=2
while i<fitIn: i*=2
if i==fitIn: num=fitIn*3/2
else: num=i/2
out.append("\\times %d/%d {" % (num,fitIn))
notehead_markup.tuplet = (num,fitIn)
elif word==']': # tuplet end
out.append("}")
notehead_markup.tuplet = (1,1)
elif word=="Fine":
need_final_barline = 0
out.append(r'''\once \override Score.RehearsalMark #'break-visibility = #begin-of-line-invisible \once \override Score.RehearsalMark #'self-alignment-X = #RIGHT \mark "Fine" \bar "|."''')
elif word=="DC":
need_final_barline = 0
out.append(r'''\once \override Score.RehearsalMark #'break-visibility = #begin-of-line-invisible \once \override Score.RehearsalMark #'self-alignment-X = #RIGHT \mark "D.C. al Fine" \bar "||"''')
else:
figure,nBeams,dot,octave,accidental = parseNote(word)
if figure:
need_final_barline = 1
b4last,aftrlast,this = notehead_markup(figure,nBeams,dot,octave,accidental)
if b4last: out[lastPtr]=b4last+out[lastPtr]
if aftrlast: out[lastPtr] += aftrlast
lastPtr = len(out)
out.append(this)
if nBeams > maxBeams: maxBeams = nBeams
else: errExit("Unrecognised command "+word+" in score "+str(scoreNo))
if notehead_markup.barPos == 0 and notehead_markup.barNo == 1: errExit("No jianpu in score %d" % scoreNo)
if notehead_markup.inBeamGroup and not midi and not western and not notehead_markup.inBeamGroup=="restHack": out[lastPtr] += ']' # needed if ending on an incomplete beat
if inTranspose: out.append("}")
if repeatStack: errExit("Unterminated repeat in score %d" % scoreNo)
if escaping: errExit("Unterminated LP: in score %d" % scoreNo)
notehead_markup.endScore() # perform checks
if need_final_barline and not midi: out.append(r'\bar "|."')
if midi or western: out = ' '.join(out)
else: out = '\n'.join(out)
if western: # collapse tied notes into longer notes
out = re.sub(r"(?P<note>[^ ]*)4 ~ (?P=note)4 ~ (?P=note)4 ~ (?P=note)4",r"\g<1>1",out)
out = re.sub(r"(?P<note>[^ ]*)4 ~ (?P=note)4 ~ (?P=note)4",r"\g<1>2.",out)
out = re.sub(r"(?P<note>[^ ]*)4 ~ (?P=note)4",r"\g<1>2",out)
out = out.replace(r"\new RhythmicStaff \with {",r"\new RhythmicStaff \with { \override VerticalAxisGroup.default-staff-staff-spacing = #'((basic-distance . 6) (minimum-distance . 6) (stretchability . 0)) ") # don't let it hang too far up in the air
return out,maxBeams,lyrics,headers print all_scores_start() ; scoreNo = 0 # incr'd to 1 below
western = False
for score in re.split(r"\sNextScore\s"," "+inDat+" "):
if not score.strip(): continue
scoreNo += 1
wordSet = set(score.split())
has_lyrics = "L:" in wordSet or "H:" in wordSet # the occasional false positive doesn't matter: has_lyrics==False is only an optimisation
for midi in [0,1]:
print score_start()
out,maxBeams,lyrics,headers = getLY(score)
if midi:
print midi_staff_start(),out,midi_staff_end()
else:
print jianpu_staff_start(),out,jianpu_staff_end()
if notehead_markup.withStaff:
western=True ; print western_staff_start(),getLY(score)[0],western_staff_end() ; western = False
lyrics = lyrics.replace(r'\lyricsto "jianpu"',r'\lyricsto "5line"')
if lyrics: print lyrics
print score_end(**headers)