Centos7上安装Kubernetes集群部署docker

时间:2022-06-01 05:18:54

一、安装前准备
1.操作系统详情
需要三台主机,都最小化安装 centos7.3,并update到最新

[root@master ~]# cat /etc/redhat-release 
CentOS Linux release 7.3. (Core)

角色       主机名         IP
Master  master  192.168.1.14
node1  slave-1  192.168.1.15
node2  slave-2  192.168.1.16

2.在每台主机上关闭firewalld改用iptables
输入以下命令,关闭firewalld

[root@master ~]# systemctl stop firewalld.service #停止firewall 
[root@master ~]# systemctl disable firewalld.service #禁止firewall开机启动

3.安装ntp服务

[root@master ~]# yuminstall -y ntp wget net-tools 
[root@master ~]# systemctl start ntpd systemctl enable ntpd

二、安装配置

注:kubernetes,etcd等已经进去centos epel源,可以直接yum安装(需要安装epel-release)

1.安装Kubernetes Master
使用以下命令安装kubernetes 和 etcd

# yum install -y kubernetes etcd
编辑/etc/etcd/etcd.conf 使etcd监听所有的ip地址,确保下列行没有注释,并修改为下面的值

[root@master ~]# cat /etc/etcd/etcd.conf 
# [member] ETCD_NAME=default ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379"
ETCD_INITIAL_CLUSTER="default=http://192.168.1.14:2380"
#[cluster]
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.1.14:2379"

编辑Kubernetes API server的配置文件 /etc/kubernetes/apiserver,确保下列行没有被注释,并为下列的值

[root@master ~]# cat /etc/kubernetes/apiserver
###
# kubernetes system config
#
# The following values are used to configure the kube-apiserver
# # The address on the local server to listen to.
KUBE_API_ADDRESS="--address=0.0.0.0" # The port on the local server to listen on.
KUBE_API_PORT="--port=8080" # Port minions listen on
KUBELET_PORT="--kubelet_port=10250" # Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd_servers=http://192.168.1.14:2379" # Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16" # default admission control policies
KUBE_ADMISSION_CONTROL="--admission_control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota" # Add your own!
KUBE_API_ARGS=""

启动etcd, kube-apiserver, kube-controller-manager and kube-scheduler服务,并设置开机自启

[root@master ~]# cat /script/kubenetes_service.sh

for SERVICES in etcd kube-apiserver kube-controller-manager kube-scheduler; do
systemctl restart $SERVICES
systemctl enable $SERVICES
systemctl status $SERVICES
done
[root@master ~]# sh /script/kubenetes_service.sh

在etcd中定义flannel network的配置,这些配置会被flannel service下发到nodes:

[root@master ~]# etcdctl mk /centos.com/network/config '{"Network":"172.17.0.0/16"}'

添加iptables规则,允许相应的端口

[root@master ~]# iptables -I INPUT -p tcp --dport  -j ACCEPT
[root@master ~]# iptables -I INPUT -p tcp --dport  -j ACCEPT
[root@master ~]# iptables -I INPUT -p tcp --dport  -j ACCEPT 
[root@master ~]# iptables-save 
或者写入iptables配置文件 /etc/sysconfig/iptables

查看节点信息(我们还没有配置节点信息,所以这里应该为空)

[root@master ~]# kubectl get nodes
NAME LABELS STATUS

2. 安装Kubernetes Nodes

注:下面这些步骤应该在node1和node2上执行(也可以添加更多的node)

使用yum安装kubernetes 和 flannel

[root@slave1 ~]# yum install -y flannel kubernetes

为flannel service配置etcd服务器,编辑/etc/sysconfig/flanneld文件中的下列行以连接到master

[root@slave1 ~]# cat /etc/sysconfig/flanneld
FLANNEL_ETCD="http://192.168.1.14:2379" #改为etcd服务器的ip
FLANNEL_ETCD_PREFIX="/centos.com/network"

编辑/etc/kubernetes/config 中kubernetes的默认配置,确保KUBE_MASTER的值是连接到Kubernetes master API server:

[root@slave1 ~]# cat /etc/kubernetes/config
KUBE_MASTER="--master=http://192.168.1.14:8080"

编辑/etc/kubernetes/kubelet 如下行:

node1:

[root@slave1 ~]# cat /etc/kubernetes/kubelet

KUBELET_ADDRESS="--address=0.0.0.0"
KUBELET_PORT="--port=10250"
KUBELET_HOSTNAME="--hostname_override=192.168.1.15"
KUBELET_API_SERVER="--api_servers=http://192.168.1.14:8080"
KUBELET_ARGS=""

node2:

[root@slave2 ~]# cat /etc/kubernetes/kubelet

KUBELET_ADDRESS="--address=0.0.0.0"
KUBELET_PORT="--port=10250"
KUBELET_HOSTNAME="--hostname_override=192.168.1.16"
KUBELET_API_SERVER="--api_servers=http://192.168.1.14:8080"
KUBELET_ARGS=""

启动kube-proxy, kubelet, docker 和 flanneld services服务,并设置开机自启

[root@slave1 ~]# cat /script/kubernetes_node_service.sh

for SERVICES in kube-proxy kubelet docker flanneld; do
systemctl restart $SERVICES
systemctl enable $SERVICES
systemctl status $SERVICES
done

在每个node节点,你应当注意到你有两块新的网卡docker0 和 flannel0。你应该得到不同的ip地址范围在flannel0上,就像下面这样:

node1:

[root@slave1 ~]# ip a | grep flannel | grep inet
inet 172.17.11.0/16 scope global flannel0

node2:

[root@slave2 ~]# ip a | grep flannel | grep inet
inet 172.17.60.0/ scope global flannel0

添加iptables规则:

[root@slave1 ~]# iptables -I INPUT -p tcp --dport  -j ACCEPT
[root@slave1 ~]# iptables -I INPUT -p tcp --dport -j ACCEPT
[root@slave1 ~]# iptables -I INPUT -p tcp --dport -j ACCEPT

现在登陆kubernetes master节点验证minions的节点状态:

[root@master ~]# kubectl get nodes
NAME STATUS AGE
192.168.1.15 Ready 2h
192.168.1.16 Ready 2h

至此,kubernetes集群已经配置并运行了,我们可以继续下面的步骤。

三、创建 Pods (Containers)
为了创建一个pod,我们需要在kubernetes master上面定义一个yaml 或者 json配置文件。然后使用kubectl命令创建pod

[root@slave1 ~]# mkdir -p /k8s/pods
[root@slave1 ~]# cd /k8s/pods/
[root@slave1 ~]# cat nginx.yaml

在nginx.yaml内容如下:

apiVersion: v1
kind: Pod
metadata:
name: nginx
labels:
app: nginx
spec:
containers:
- name: nginx
image: nginx
ports:
- containerPort:

创建pod:

[root@slave1 ~]# kubectl create -f nginx.yaml

此时有如下报错:

Error from server: error when creating "nginx.yaml": Pod "nginx" is forbidden: no API token found for service account default/default, retry after the token is automatically created and added to the service account
解决办法是编辑/etc/kubernetes/apiserver 去除 KUBE_ADMISSION_CONTROL中的SecurityContextDeny,ServiceAccount,并重启kube-apiserver.service服务:

#cat /etc/kubernetes/apiserver
KUBE_ADMISSION_CONTROL="--admission_control=NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"

#systemctl restart kube-apiserver.service
之后重新创建pod:

# kubectl create -f nginx.yaml
pods/nginx
查看pod:

# kubectl get pod nginx
NAME READY STATUS RESTARTS AGE
nginx 0/1 Image: nginx is not ready on the node 0 34s
这里STATUS一直是这个,创建不成功,下面排错。通过查看pod的描述发现如下错误:

# kubectl describe pod nginx
Wed, 28 Oct 2015 10:25:30 +0800 Wed, 28 Oct 2015 10:25:30 +0800 1 {kubelet 192.168.1.16} implicitly required container POD pulled Successfully pulled Pod container image "gcr.io/google_containers/pause:0.8.0"
Wed, 28 Oct 2015 10:25:30 +0800 Wed, 28 Oct 2015 10:25:30 +0800 1 {kubelet 192.168.1.16} implicitly required container POD failed Failed to create docker container with error: no such image
Wed, 28 Oct 2015 10:25:30 +0800 Wed, 28 Oct 2015 10:25:30 +0800 1 {kubelet 192.168.1.16} failedSync Error syncing pod, skipping: no such image
Wed, 28 Oct 2015 10:27:30 +0800 Wed, 28 Oct 2015 10:29:30 +0800 2 {kubelet 192.168.1.16} implicitly required container POD failed Failed to pull image "gcr.io/google_containers/pause:0.8.0": image pull failed for gcr.io/google_containers/pause:0.8.0, this may be because there are no credentials on this request. details: (API error (500): invalid registry endpoint "http://gcr.io/v0/". HTTPS attempt: unable to ping registry endpoint https://gcr.io/v0/
v2 ping attempt failed with error: Get https://gcr.io/v2/: dial tcp 173.194.72.82:443: i/o timeout

这里可能会遇到pod状态一直处于Penning的问题,此时可以通过kubectl describe pods/pod-name来查看pod信息,如果没有出错信息,那么Minion一直处于下载镜像中,下载好之后pod即会成功启动。

从网上找到 pause:0.8.0 的镜像,然后再每个node上导入镜像:

请在*docker服务器执行 docker pull 命令下载镜像

gcr.io/google_containers/pause:latest
gcr.io/google_containers/pause:1.0
gcr.io/google_containers/pause:0.8.0

再用导出镜像

docker save -o pause.tar gcr.io/google_containers/pause
gzip pause.tar

最后把这个包放到 kubernetes 环境所有的 docker 服务器上

 docker load -i pause.tar.gz

在执行以下命令即可成功创建pod

[root@master ~]#kubectl create -f nginx.yaml
pods/nginx

查看pod

[root@master ~]# kubectl get pod nginx
NAME READY STATUS RESTARTS AGE
nginx / Running 2min

前往nodes节点上查看docker images

[root@slave1 ~]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
registry.access.redhat.com/rhel7/pod-infrastructure latest 34d3450d733b weeks ago MB
gcr.io/google_containers/pause 0.8. bf595365a558 years ago 241.7 kB