Redis 3.0 与 3.2 配置文件变化

时间:2022-08-19 08:57:03

一、Redis3.0 与 3.2 配置文件对比

1. clone redis

git clone https://github.com/antirez/redis.git

2. checkout分支

cd redis
git checkout 3.0
git checkout 3.2

3. 比较

(1) 比较3.0和3.2文件变化数

> git rev-list 3.0..3.2 --count
1708

(2) 比较3.0和3.2文件变化统计

> git diff 3.0..3.2 --shortstat

​​​​比较3.0和3.2文件变化数

二、Redis3.0与3.2默认配置文件变化

1.配置变化

Redis 3.0 与 3.2 配置文件变化

Redis3.2添加了两个配置:

protected-mode yes
supervised no

Redis3.2修改了个配置:

有关list的优化,由配置一改为配置二,虽然还没详细了解,应该是list的底层数据结构做了一些新的变化或者优化。

配置一:

list-max-ziplist-entries 512
list-max-ziplist-value 64

配置二:

list-max-ziplist-size -2
list-compress-depth 0

配置三:

bind 127.0.0.1

bind 在 Redis3.2.0 中默认改为 127.0.0.1

2.新配置说明

(1).protected-mode(默认是yes)

# Protected mode is a layer of security protection, in order to avoid that
# Redis instances left open on the internet are accessed and exploited.
#
# When protected mode is on and if:
#
# 1) The server is not binding explicitly to a set of addresses using the
# "bind" directive.
# 2) No password is configured.
#
# The server only accepts connections from clients connecting from the
# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain
# sockets.
#
# By default protected mode is enabled. You should disable it only if
# you are sure you want clients from other hosts to connect to Redis
# even if no authentication is configured, nor a specific set of interfaces
# are explicitly listed using the "bind" directive.

说明

用一段代码就可以说明什么是protected-mode

if (protected-mode && !requirepass && !bind) {
Allow only 127.0.0.1,::1 or socket connections
Deny (with the long message ever!) others
}

其实设置成默认是为了保护对redis不了解的人,提供安全性,但是对于对于不需要bind和requirepass的使用者(例如内网),需要将protected-mode设置为no

(2).supervised (默认是no)

# If you run Redis from upstart or systemd, Redis can interact with your
# supervision tree. Options:
# supervised no - no supervision interaction
# supervised upstart - signal upstart by putting Redis into SIGSTOP mode
# supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
# supervised auto - detect upstart or systemd method based on
# UPSTART_JOB or NOTIFY_SOCKET environment variables
# Note: these supervision methods only signal "process is ready."
# They do not enable continuous liveness pings back to your supervisor.

说明

可以通过upstart和systemd管理Redis守护进程,这个参数是和具体的操作系统相关的。

(3).bind (Redis3.2.0中bind默认是127.0.0.1)

# By default, if no "bind" configuration directive is specified, Redis listens
# for connections from all the network interfaces available on the server.
# It is possible to listen to just one or multiple selected interfaces using
# the "bind" configuration directive, followed by one or more IP addresses.
#
# Examples:
#
# bind 192.168.1.100 10.0.0.1
# bind 127.0.0.1 ::1
#
# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
# internet, binding to all the interfaces is dangerous and will expose the
# instance to everybody on the internet. So by default we uncomment the
# following bind directive, that will force Redis to listen only into
# the IPv4 lookback interface address (this means Redis will be able to
# accept connections only from clients running into the same computer it
# is running).
#
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
# JUST COMMENT THE FOLLOWING LINE.
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bind 127.0.0.1

说明

bind在Redis3.2.0之前默认是0.0.0.0或者说””,为了保证不太了解Redis安全性的人,在Redis3.2.0中bind默认是127.0.0.1,也就是只有本机回环地址可以访问。如果需要配置sentinel、cluster或者需要机器机器可以访问该Redis实例请修改为0.0.0.0或者指定的内网IP.

(4).list-max-ziplist-size(默认-2)

# Lists are also encoded in a special way to save a lot of space.
# The number of entries allowed per internal list node can be specified
# as a fixed maximum size or a maximum number of elements.
# For a fixed maximum size, use -5 through -1, meaning:
# -5: max size: 64 Kb <-- not recommended for normal workloads
# -4: max size: 32 Kb <-- not recommended
# -3: max size: 16 Kb <-- probably not recommended
# -2: max size: 8 Kb <-- good
# -1: max size: 4 Kb <-- good
# Positive numbers mean store up to _exactly_ that number of elements
# per list node.
# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
# but if your use case is unique, adjust the settings as necessary.

(5).list-compress-depth(默认是0)

# Lists may also be compressed.
# Compress depth is the number of quicklist ziplist nodes from *each* side of
# the list to *exclude* from compression. The head and tail of the list
# are always uncompressed for fast push/pop operations. Settings are:
# 0: disable all list compression
# 1: depth 1 means "don't start compressing until after 1 node into the list,
# going from either the head or tail"
# So: [head]->node->node->...->node->[tail]
# [head], [tail] will always be uncompressed; inner nodes will compress.
# 2: [head]->[next]->node->node->...->node->[prev]->[tail]
# 2 here means: don't compress head or head->next or tail->prev or tail,
# but compress all nodes between them.
# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
# etc.

说明

Redis3.2.0引入了新的quicklist的数据结构做了list的底层存储方案。废弃了原来的两个配置参数,list-max-ziplist-entries 和 list-max-ziplist-value

127.0.0.1:6388> config get list-max-ziplist-size
1) "list-max-ziplist-size"
2) "-2"
127.0.0.1:6388> config get list-compress-depth
1) "list-compress-depth"
2) "0"
127.0.0.1:6388> lpush user_list u1 u2 u5 u7 u99 u10 u3
(integer) 7
127.0.0.1:6388> object encoding user_list
"quicklist"

在Redis3.2.0中设置原来的参数已经不生效了,应该是无法使用了。

127.0.0.1:6388> config set list-max-ziplist-entries 512
(error) ERR Unsupported CONFIG parameter: list-max-ziplist-entries
127.0.0.1:6388> config set list-max-ziplist-value 64
(error) ERR Unsupported CONFIG parameter: list-max-ziplist-value

有关quicklist的详细使用还需要查询文档和源码来研究

三、 Redis3.0与3.2关于Cluster的一些变化 (来自3.2-release-notes)

原文:

写道

Redis Cluster changes:

All the Redis Cluster changes in 3.2 were backported to 3.0, so there is
technically nothing new for now in this release. The most important things
are:

* Cluster rebalancing.
* A pipelined MIGRATE command which is 10x faster and makes resharding
and rebalancing faster.
* Improved replicas migration.
* As a side effect of quicklists encoding (see above items), moving big
lists between nodes is now a lot faster.

Redis3.2.0的cluster完全兼容Redis3.0,也就是说可以混合部署组成集群,在Redis Cluster上Redis3.2.0没有做什么新的技术,但是也有一些比较重要的事情:

Redis Cluster均衡(应该是指redis-trib.rb中实现类将slot进行负载均衡的功能)

提供了一个基于流水线的migrate命令,用于水平迁移数据,速度是原来的10倍多。

提升了从几点迁移的功能。

在quicklist这种新的数据结构的帮助下,在节点之间迁移大的big list快了很多.

注意:上述特性均在Redis3.0.7有体现,如果对于Redis3.2.0不太放心的话,可以使用Redis3.0.7。

四、 Redis3.0与3.2关于Sentinel的一些变化 (来自3.2-release-notes)

原文:

Redis Sentinel changes:

* [NEW] Sentinel connection sharing. Makes Sentinels able to scale to
monitor many masters. (Salvatore Sanfilippo)
* [NEW] New SENTINEL INFO-CACHE command. (Matt Stancliff)
* More things backported to Redis 3.0 in the past, so no longer news of 3.2.

Sentinel connection sharing

不太了解,看着像是添加新的sentinel节点后,可以共享其他sentinel节点的master,对于sentinel监控多个master比较有用,这样扩展sentinel节点时候比较方便配置,有关这个后面会继续试验。

提供info-cache命令