检查系统是否安装snmp服务
# rpm -qa|grep snmp
net-snmp-5.3.2.2-17.el5
net-snmp-perl-5.3.2.2-17.el5
net-snmp-devel-5.3.2.2-17.el5
net-snmp-libs-5.3.2.2-17.el5
net-snmp-utils-5.3.2.2-17.el5
net-snmp-libs-5.3.2.2-17.el5
net-snmp-devel-5.3.2.2-17.el5
SNMP服务安装后会有以上安装包
安装SNMP服务
1.配置好本地yum服务，使用yum安装
yum install -y net-snmp*
2.配置SNMP服务开机启动
#chkconfig snmpd on
#chkconfig --list | grep snmpd 查看开机启动设置是否成功
snmpd 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭
验证SNMP服务
1.使用snmpwalk获取主机名
# snmpwalk -v 2c -c public localhost sysName.0
SNMPv2-MIB::sysName.0 = STRING: wh69
snmpwalk使用方法
snmpwalk -v 1|2c|3(代表SNMP版本号) -c <community string> IP地址 OID(对象标示符)
2.使用snmptranslate命令，检查snmp工具能否够使用
# snmptranslate -To | head
.1.3
.1.3.6
.1.3.6.1
.1.3.6.1.1
.1.3.6.1.2
.1.3.6.1.2.1
.1.3.6.1.2.1.1
.1.3.6.1.2.1.1.1
.1.3.6.1.2.1.1.2
.1.3.6.1.2.1.1.3
查出了部分oid，则表示snmp工具能够正常使用
配置SNMP服务
1.配置SNMP连接字符串 community string
#vi /etc/snmp/snmpd.conf
改动以下字段
# sec.name source community
com2sec notConfigUser default public改动public为自定义的community string
2.改动查看设备节点权限
在配置文件/etc/snmp/snmpd.conf中找到例如以下位置
####
# Third, create a view for us to let the group have rights to:
# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1view：定义了能够查看哪些节点设备的信息。
snmp默认配置仅仅能查看.1.3.6.1.2.1.1和.1.3.6.1.2.1.25.1.1节点下的设备信息，
而主机CPU和内存等设备都不在这些节点下。所以无法获取这些数据。
因此，能够改动这个配置，例如以下：
####
# Third, create a view for us to let the group have rights to:
# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
view systemview included .1
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1在此处加入了一行：
view systemview included .1
表示能够查看.1节点下的全部设备信息。
3.改动Process checks的配置
在配置文件/etc/snmp/snmpd.conf中找到例如以下位置
###############################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.
#
# Examples (commented out by default):
#
# Make sure mountd is running
#proc mountd
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
#proc ntalkd 4
# Make sure at least one sendmail, but less than or equal to 10 are running.
#proc sendmail 10 1去除
#proc mountd
#proc ntalkd 4
#proc sendmail 10 1
这三行前面的#号，取消凝视
4.改动Executables/scripts配置
在配置文件/etc/snmp/snmpd.conf中找到例如以下位置
###############################################################################
# Executables/scripts
#
#
# You can also have programs run by the agent that return a single
# line of output and an exit code. Here are two examples.
#
# exec NAME PROGRAM [ARGS ...]
#
# NAME: A generic name.
# PROGRAM: The program to run. Include the path!
# ARGS: optional arguments to be passed to the program
# a simple hello world
#exec echotest /bin/echo hello world
# Run a shell script containing:将
#exec echotest /bin/echo hello world
前面的#去掉，取消凝视
5.改动disk checks配置
在配置文件/etc/snmp/snmpd.conf中找到例如以下位置
###############################################################################
# disk checks
#
# The agent can check the amount of available disk space, and make
# sure it is above a set limit.
# disk PATH [MIN=100000]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Default value = 100000.
# Check the / partition and make sure it contains at least 10 megs.
#disk / 10000将
#disk / 10000
前的#号去掉。取消凝视
6.改动load average checks配置
在配置文件/etc/snmp/snmpd.conf中找到例如以下位置
###############################################################################
# load average checks
#
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.
# Check for loads:
#load 12 14 14将
#load 12 14 14
前的#去掉。取消凝视
7.保存改动，重新启动snmp服务
#service snmpd restart
8.验证改动配置后的snmp服务
# snmpwalk -v 2c -c xindixindi localhost 1.3.6.1.4.1.2021.11.11.0
UCD-SNMP-MIB::ssCpuIdle.0 = INTEGER: 99
如上，通过本机localhost获取到CPU的空暇率为99%
完毕配置
如今能够在solarwinds和Cacti等监控系统中，通过SNMP服务监控该linuxserver了。