分布式icinga2安装与使用

时间：2023-03-09 00:06:30
分布式icinga2安装与使用

目标

配置分布式的icinga2监控系统。分布式监控适用于服务器遍布在多个区域，且需要一个master做统一管理。

搭建环境

服务器

系统: ubuntu 15.04/ubuntu 14.04

icinga2主节点: 192.168.19.77 负责分发配置，统一展示监控结果。

icinga2子节点1: 192.168.19.45 负责监控openstack RegionOne区域的所有服务器

icinga2子节点2: 192.168.19.30 负责将空openstack RegionTwo区域的所有服务器

为了充分利用现有的nagios插件，使用nrpe监控服务器。

拓扑图

分布式icinga2安装与使用

安装配置icinga2

注意: 如果特别说明，所有操作均在192.168.19.77,45,30执行。

设置包源

# add-apt-repository ppa:formorer/icinga

# apt-get update

安装icinga2

# apt-get install icinga2

安装classicui界面

在192.168.77上执行

apt-get install icinga2-classicui -y

配置分布式监控

设置ssl

在192.168.77上执行

生成ca证书

#icinga2 pki new-ca

生成各个节点需要用的key,crt

设置节点名

key与crt的名字需要与节点名吻合，默认使用hostname。如果要自定义节点名需要编辑/etc/icinga2/constants.conf,修改如下配置

const NodeName = "node-master"

node-master是新的节点名

生成key,crt
# cd /tmp

##192.168.19.77

# icinga2 pki new-cert --cn node-master --key node-master.key --csr node-master.csr

# icinga2 pki sign-csr --csr node-master.csr --cert node-master.crt

##192.168.19.45

# icinga2 pki new-cert --cn node-45 --key node-45.key --csr node-45.csr

# icinga2 pki sign-csr --csr node-45.csr --cert node-45.crt

##192.168.19.30

# icinga2 pki new-cert --cn node-30 --key node-30.key --csr node-30.csr

# icinga2 pki sign-csr --csr node-30.csr --cert node-30.crt

分布复制ca.crt,.crt,.key到3台服务器的/etc/icinga2/pki/目录。下面显示的是192.168.19.77的pki目录

# ll /etc/icinga2/pki/

total 20

drwxr-xr-x 2 root   root   4096 May 11 17:19 ./

drwxr-x--- 9 nagios nagios 4096 May 13 12:09 ../

-rw-rw-rw- 1 root   root   1688 May 11 15:25 ca.crt

-rw-rw-rw- 1 root   root   1663 May 11 15:28 node-master.crt

-rw-rw-rw- 1 root   root   3243 May 11 15:26 node-master.key
启用api功能
# icinga2 feature enable api

添加accept_config = true, accept_commands = true参数

# vim /etc/icinga2/features-enabled/api.conf

/**

 * The API listener is used for distributed monitoring setups.

 */

object ApiListener "api" {

  cert_path = SysconfDir + "/icinga2/pki/" + NodeName + ".crt"

  key_path = SysconfDir + "/icinga2/pki/" + NodeName + ".key"

  ca_path = SysconfDir + "/icinga2/pki/ca.crt"

  ticket_salt = TicketSalt

  accept_config = true

  accept_commands = true

}
# service icinga2 restart

配置endopoint,zone

EndPoint 需要与NodeName一致。

# vim /etc/icinga2/zones.conf

object Endpoint "node-master" {

  host = "192.168.19.77"

}

object Endpoint "node-45" {

  host = "192.168.19.45"

}

object Endpoint "node-30" {

  host = "192.168.19.30"

}

object Zone "zone-master" {

  endpoints = [ "node-master" ]

}

object Zone "zone-45" {

  parent = "zone-master"

  endpoints = [ "node-45" ]

}

object Zone "zone-30" {

  parent = "zone-master"

  endpoints = [ "node-30" ]

}

object Zone "global-templates" {

  global = true

}

这里配置了4个区域，分别是zone-master,zone-45,zone-30,global-templates。global-templates区域中的配置会分发到所有的区域。

配置文件管理

创建配置目录，目录名要与区域名一致。

在192.168.77上执行

# mkdir /etc/icinga2/zones.d/global-templates/

# mkdir /etc/icinga2/zones.d/zone-30/

# mkdir /etc/icinga2/zones.d/zone-45/

# mkdir /etc/icinga2/zones.d/zone-master/

将/etc/icinga2/conf.d中的文件复制到/etc/icinga2/zones.d/global-templates/

# cp -rf /etc/icinga2/conf.d/* /etc/icinga2/zones.d/global-templates/

注释掉3台服务器上conf.d目录

# vim /etc/icinga2/icinga2.conf

#include_recursive "conf.d"

配置master监控两个子节点

object Host NodeName {

  import "generic-host"

  address = "127.0.0.1"

  vars.os = "Linux"

  vars.disks["disk"] = {

  }

  vars.notification["mail"] = {

    groups = [ "icingaadmins" ]

  }

  /*NIC dell2950 */

  vars.interfaces["eth0"]={

    interface_speed = 100

  }

}

object Host "node-45" {

  import "generic-host"

  address = "192.168.19.45"

  vars.os = "Linux"

  vars.disks["disk"] = {

  }

  vars.notification["mail"] = {

    groups = [ "icingaadmins" ]

  }

  /*NIC*/

  vars.interfaces["em1"]={

    interface_speed = 1000

  }

  /* openstack */

  vars.openstack_controller_listen="192.168.19.45"

  vars.openstack["keystone"]="controller"

  vars.openstack["cinder"]="controller"

  vars.openstack["glance"]="controller"

  vars.openstack["heat"]="controller"

  vars.openstack["nova"]="controller"

}

object Host "node-30" {

  import "generic-host"

  address = "192.168.19.30"

  vars.os = "Linux"

  vars.disks["disk"] = {

  }

  vars.notification["mail"] = {

    groups = [ "icingaadmins" ]

  }

  /*NIC*/

  vars.interfaces["em1"]={

    interface_speed = 1000

  }

}

清空缓存

# rm -rf /var/lib/icinga2/api/zones/*

重启icinga2，查看结果

# service icinga2 restart

打开http://192.168.19.77/icinga2-classicui/

配置正确的话，应该可以看到77，45，39服务器的监控信息

使用SNMP监控网络

在icinga2服务端安装监控插件

参考: http://www.tontonitch.com/tiki/tiki-index.php?page=Nagios+plugins+-+interfacetable_v3t+-+documentation+-+0.05+-+Installation&structure=Nagios+plugins+-+interfacetable_v3t+-+documentation+-+0.05

  1. 安装依赖

    apt-get install snmpd sudo perl libconfig-general-perl libdata-dumper-simple-perl libsort-naturally-perl libexception-class-perl libencode-perl

    文档里漏掉下面几个包:

    apt-get install libdata-dumper-simple-perl libsys-statistics-linux-perl libnet-snmp-perl

  2. 编译安装snmp网络检测程序

    从http://www.tontonitch.com/tiki/tiki-index.php?page=Nagios+plugins+-+interfacetable_v3t下载最新的包，解压进入目录后:

    ./configure
    
make fullinstall

  3. 测试

    /usr/local/nagios/libexec/check_interface_table_v3t.pl -V

  4. 启用icinga2监控脚本

    cp /usr/share/icinga2/include/plugins-contrib.d/network-components.conf /etc/icinga2/zones.d/global-templates/

    注意:

    修改其中的command为正确脚本路径.

    修改-C为正确的值，默认是public.

  5. 应用检测命令到主机上

    # vim services.conf

apply Service "network"{
    
  import "generic-service"

  display_name = "check network"
    
  check_command = "interfacetable"
    
  assign where host.vars.os == "Linux"
    
}

被监控端安装配置SNMP服务

  1. apt-get install snmpd snmp

  2. 修改监听地址，连接串，且只允许icinga2服务端连接

    # vim /etc/snmp/snmpd.conf

agentAddress  udp:10.33.10.66:161
    
rocommunity NmQwZmVmZT  10.33.10.84
    
#注释掉这行
    
#rocommunity public  default    -V systemonly
    
#注释这行，它会监听一个随机端口
    
#trapsink     localhost public

  3. 重启snmpd服务 service snmpd restart

使用nrpe监控服务器

源码安装

不用apt的原因是apt安装的nrpe不接受监控命令传参。

创建nagios用户

useradd nagios -M -s /bin/false

编译安装

apt-get install build-essential libssl-dev libssl0.9.8 unzip make -y

cd /usr/local/src

wget http://sourceforge.net/projects/nagios/files/nrpe-2.x/nrpe-2.15/nrpe-2.15.tar.gz/download -O nrpe-2.15.tar.gz

tar -xf nrpe-2.15.tar.gz

cd nrpe-2.15

./configure --enable-command-args --with-ssl=/usr/bin/openssl --with-ssl-lib=/usr/lib/x86_64-linux-gnu

make all

make install-daemon

安装通用插件

apt-get install nagios-plugins -y

添加配置文件

mkdir /etc/nagios

vim /etc/nagios/nrpe.cfg

log_facility=daemon

pid_file=/var/run/nrpe.pid

server_address=172.16.240.30

server_port=5666

nrpe_user=nagios

nrpe_group=nagios

allowed_hosts=127.0.0.1,172.16.240.30

dont_blame_nrpe=1

debug=0

command_timeout=60

connection_timeout=300

command[check_load]=/usr/lib/nagios/libexec/check_load -w 20,15,10 -c 50,40,30

command[check_disk]=/usr/lib/nagios/libexec/check_disk -w 10% -c 5% -W 10% -K 5% -A

command[check_mem]=/usr/lib/nagios/libexec/check_mem -u -C -w 85 -c 90

command[check_proc_num]=/usr/lib/nagios/libexec/check_procs -m PROCS -w 1500:1000 -c 300000:1500

command[check_zombie_procs]=/usr/lib/nagios/libexec/check_procs -w 5 -c 10 -s Z

command[check_swap]=/usr/lib/nagios/libexec/check_swap -a -w 30% -c 15%

command[check_local_port]=/usr/lib/nagios/libexec/check_tcp -H localhost -p $ARG1$ -w 2 -c 5

command[check_linux_raid]=/usr/lib/nagios/libexec/check_linux_raid

command[check_md_raid]=/usr/lib/nagios/libexec/check_md_raid

command[check_icmp]=/usr/lib/nagios/libexec/check_icmp $ARG1$

command[check_lvs]=/usr/lib/nagios/libexec/check_ipvsadm

command[check_backup]=/usr/lib/nagios/libexec/check_backup

command[check_dns]=/usr/lib/nagios/libexec/check_dns -H www.baidu.com

command[check_http]=/usr/lib/nagios/libexec/check_http

command[check_rsyncd]=/usr/lib/nagios/libexec/check_rsyncd

command[check_monitorwebbackup]=/usr/lib/nagios/libexec/check_monitorwebbackup

command[check_monitormysqlbackup]=/usr/lib/nagios/libexec/check_monitormysqlbackup

command[check_diskhealth]=/usr/lib/nagios/libexec/check_openmanage --check storage -b ctrl_fw=all/ctrl_driver=all/ctrl_stdr=all/bat_charge=all/encl=all/ps=all -t 30

command[check_safe]=/usr/lib/nagios/libexec/check_safe $ARG1$

command[check_tcptraffic]=/usr/lib/nagios/plugins/contrib/check_tcptraffic -w $ARG1$ -c $ARG2$ -s $ARG3$ -i $ARG4$

command[check_iostat_io]=/usr/lib/nagios/libexec/check_iostat -d $ARG1$ -i -p

command[check_iostat_waittime]=/usr/lib/nagios/libexec/check_iostat -d $ARG1$ -W -p

command[check_keystone_api]=/usr/lib/nagios/libexec/check_keystone --auth_url "http://$ARG1$:35357/v2.0" --username $ARG2$ --tenant $ARG3$ --password $ARG4$

command[check_keystone_proc]=/usr/lib/nagios/plugins/check_procs -c 1: -u keystone

command[check_cinder_api_proc]=/usr/lib/nagios/libexec/check_service.sh -o linux -s cinder-api

command[check_cinder_scheduler_proc]=/usr/lib/nagios/libexec/check_service.sh -o linux -s cinder-scheduler

command[check_cinder_api]=/usr/lib/nagios/libexec/check_cinder_api --auth_url "http://$ARG1$:35357/v2.0" --username $ARG2$ --tenant $ARG3$ --password $ARG4$

command[check_cinder_scheduler_connectivity]=/usr/lib/nagios/libexec/check_cinder-scheduler.sh

在rc.local加入启动命令

# vim /etc/rc.local

/usr/local/nagios/bin/nrpe -c /etc/nagios/nrpe.cfg -d

从其他服务器拷贝libexec文件夹

例如: 221.228.84.84(无锡三线)

文件夹位置:/usr/lib/nagios/libexec

注意: 需要将check_icmp插件设置为root用户，然后设置setuid，不然没权限执行命令:

chown root.root /usr/lib/nagios/libexec/check_icmp

chmod u+s /usr/lib/nagios/libexec/check_icmp

chmod g+s /usr/lib/nagios/libexec/check_icmp

安装check_tcptraffic插件

apt-get install libnagios-plugin-perl libreadonly-xs-perl -y

  1. http://exchange.nagios.org/directory/Plugins/Network-Connections,-Stats-and-Bandwidth/check_tcptraffic/details 下载插件

  2. 在mac上解压后用zip重新打包上传到ubuntu，不然解压会出错

  3. 进入源码目录执行下面命令

    perl Makefile.PL
    
make
    
make install

  4. 测试

    /usr/lib/nagios/plugins/contrib/check_tcptraffic -w 10485760 -c 10485760 -s 1000 -i em1
    
/usr/lib/nagios/plugins/check_nrpe -H 127.0.0.1 -c check_tcptraffic -p 5666 -a 10485760 20971520 1000 em1

安装dell磁盘监控

  1. 设置软件源

    echo 'deb http://linux.dell.com/repo/community/ubuntu trusty openmanage' | sudo tee -a /etc/apt/sources.list.d/linux.dell.com.sources.list
    
gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F
    
gpg -a --export 1285491434D8786F | sudo apt-key add -

  2. 安装

    apt-get update
    
apt-get install srvadmin-all

  3. 启动服务

    service dataeng start

安装iostat监控

  1. 安装iostat apt-get install sysstat

  2. (如果已有check_iostat脚本则忽略) 下载监控脚本 到 /usr/lib/nagios/libexec/check_iostat,添加执行权限，所属用户和组改为nagios

    注意：要下载评论里的脚本，原始脚本有问题。

  3. 记得在icinga2的host里配置里加入:

    #check disk io and waittime
    
vars.disk_device = "sdb"

    修改sdb为需要监控的硬盘

启动nrpe

# /usr/local/nagios/bin/nrpe -c /etc/nagios/nrpe.cfg -d

在icinga2中启用nrpe

配置LibxecDir常量

根据系统取消选择相应的注释:

# vim /etc/icinga2/constants.conf

//ubuntu

//const LibexecDir = "/usr/lib/nagios/libexec"

//youfu centos

//const LibexecDir = "/usr/local/nagios/libexec"

配置checkcommand模板

# vim /etc/icinga2/zones.d/global-templates/nrpe_base.conf

template CheckCommand "nrpe-common" {

    import "plugin-check-command"

    command = [ LibexecDir + "/check_nrpe" ]

    arguments = {

        "-H" = "$nrpe_address$"

        "-t" = "$nrpe_timeout$"

        "-p" = "$nrpe_port$"

        "-c" = "$nrpe_command$"

        "-a" = {

            value = "$nrpe_args$"

            repeat_key = false

            order = 1

        }

    }

    vars.nrpe_address = "$address$"

    vars.nrpe_port = 5666

    vars.nrpe_timeout = 60

}

配置常用linux检测命令

# vim /etc/icinga2/zones.d/global-templates/nrpe_linux.conf

object CheckCommand "nrpe-disk" {

    import "nrpe-common"

    #vars.nrpe_args = [ "$disk_wfree$%", "$disk_cfree$%"]

    vars.nrpe_command = "check_disk"

    #vars.disk_wfree = 20

    #vars.disk_cfree = 10

}

object CheckCommand "nrpe-diskhealth" {

    import "nrpe-common"

    vars.nrpe_command = "check_diskhealth"

}

object CheckCommand "nrpe-tcptraffic" {

    import "nrpe-common"

    vars.nrpe_args = [ "$tcptraffic_wbytes$", "$tcptraffic_cbytes$","$interface_speed$","$interface_name$"]

    vars.nrpe_command = "check_tcptraffic"

    vars.tcptraffic_wbytes = 10485760 /*10M=10*1024*1024*/

    vars.tcptraffic_cbytes = 20971520 /*20M=20*1024*1024*/

    #vars.tcptraffic_wbytes = 1 /*10M=10*1024*1024*/

    #vars.tcptraffic_cbytes = 2 /*20M=20*1024*1024*/

}

object CheckCommand "nrpe-load" {

    import "nrpe-common"

    vars.nrpe_command = "check_load"

}

object CheckCommand "nrpe-mem" {

    import "nrpe-common"

    vars.nrpe_command = "check_mem"

}

object CheckCommand "nrpe-proc_num" {

    import "nrpe-common"

    vars.nrpe_command = "check_proc_num"

}

object CheckCommand "nrpe-zombie_procs" {

    import "nrpe-common"

    vars.nrpe_command = "check_zombie_procs"

}

object CheckCommand "nrpe-swap" {

    import "nrpe-common"

    vars.nrpe_command = "check_swap"

}

object CheckCommand "nrpe-dns" {

    import "nrpe-common"

    vars.nrpe_command = "check_dns"

}

object CheckCommand "nrpe-safe" {

    import "nrpe-common"

    vars.nrpe_command = "check_safe"

}

object CheckCommand "nrpe-iostat_io" {

    import "nrpe-common"

    vars.nrpe_command = "check_iostat_io"

    vars.nrpe_args = [ "$disk_device$" ]

}

object CheckCommand "nrpe-iostat_waittime" {

    import "nrpe-common"

    vars.nrpe_command = "check_iostat_waittime"

    vars.nrpe_args = [ "$disk_device$" ]

}

apply Service  "check_nrpe:" for (disk_nrpe_linux => config in host.vars.disks) {

  import "generic-service"

  display_name = "Check Nrpe:" + disk_nrpe_linux

  check_command = "nrpe-disk"

  vars += config

  assign where host.vars.os == "Linux"

}

#Storage Error! No controllers found on ubuntu15.04 dell r720

apply Service  "check_nrpe:diskhealth"{

  import "generic-service"

  display_name = "Check Nrpe: Diskhealth"

  check_command = "nrpe-diskhealth"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:tcptraffic" for (interface_name =>interface_info in host.vars.interfaces){

  import "generic-service"

  display_name = "Check Nrpe: Tcptraffic "+ interface_name

  check_command = "nrpe-tcptraffic"

  vars.interface_name = interface_name

  vars+=interface_info

  assign where host.vars.interfaces && host.vars.os == "Linux"

}

apply Service  "check_nrpe:load"{

  import "generic-service"

  display_name = "Check Nrpe: Load"

  check_command = "nrpe-load"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:mem"{

  import "generic-service"

  display_name = "Check Nrpe: Mem"

  check_command = "nrpe-mem"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:proc_num"{

  import "generic-service"

  display_name = "Check Nrpe: proc_num"

  check_command = "nrpe-proc_num"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:zombie_procs"{

  import "generic-service"

  display_name = "Check Nrpe: zombie_procs"

  check_command = "nrpe-zombie_procs"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:swap"{

  import "generic-service"

  display_name = "Check Nrpe: swap"

  check_command = "nrpe-swap"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:dns"{

  import "generic-service"

  display_name = "Check Nrpe: dns"

  check_command = "nrpe-dns"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:safe"{

  import "generic-service"

  display_name = "Check Nrpe: safe"

  check_command = "nrpe-safe"

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:iostat_io"{

  import "generic-service"

  display_name = "Check Nrpe: iostat_io"

  check_command = "nrpe-iostat_io"

  vars.disk_device = host.vars.disk_device

  assign where host.vars.os == "Linux"

}

apply Service  "check_nrpe:iostat_waittime"{

  import "generic-service"

  display_name = "Check Nrpe: iostat_waittime"

  check_command = "nrpe-iostat_waittime"

  vars.disk_device = host.vars.disk_device

  assign where host.vars.os == "Linux"

}

配置常用window检测命令

# vim /etc/icinga2/zones.d/global-templates/nrpe_windows.conf

object CheckCommand "windows-nrpe-cpu" {

    import "nrpe-common"

    vars.nrpe_args = []

    vars.nrpe_command = "alias_cpu"

}

object CheckCommand "windows-nrpe-disk" {

    import "nrpe-common"

    vars.nrpe_args = []

    vars.nrpe_command = "alias_disk"

}

object CheckCommand "windows-nrpe-uptime" {

    import "nrpe-common"

    vars.nrpe_args = []

    vars.nrpe_command = "uptime"

}

object CheckCommand "windows-nrpe-mem" {

    import "nrpe-common"

    vars.nrpe_args = []

    vars.nrpe_command = "alias_mem"

}

apply Service  "windows_check_nrpe:cpu"{

  import "generic-service"

  display_name = "Windows-Check Nrpe: CPU"

  check_command = "windows-nrpe-cpu"

  assign where host.vars.os == "Windows"

}

apply Service  "windows_check_nrpe:disk"{

  import "generic-service"

  display_name = "Windows-Check Nrpe: Disk"

  check_command = "windows-nrpe-disk"

  assign where host.vars.os == "Windows"

}

apply Service  "windows_check_nrpe:uptime"{

  import "generic-service"

  display_name = "Windows-Check Nrpe: Uptime"

  check_command = "windows-nrpe-uptime"

  assign where host.vars.os == "Windows"

}

apply Service  "windows_check_nrpe:Mem"{

  import "generic-service"

  display_name = "Windows-Check Nrpe: Mem"

  check_command = "windows-nrpe-mem"

  assign where host.vars.os == "Windows"

}

重载icinga2

在reload后，master会自动分发配置给两个子节点，从而做到统一配置，统一分发。

# service icinga2 reload

url: /icinga2-classicui/

默认用户: icingaadmin

分布式icinga2安装与使用

排错

  • 如果配置分布式节点后发现无法监控，或者global-templates配置没有生效，可以删除/var/lib/icinga2/api/zones下的文件，然后重启icinga2.

  • CHECK_NRPE: Error - Could not complete SSL handshake.: 查看·nrpe.cfg·的allowed_hosts配置项是否正确

  • check_iostat_*没有数据：OK - I/O stats: Transfers/Sec= Read Requests/Sec= Write Requests/Sec= KBytes Read/Sec= KBytes_Written/Sec= ,sysstat包没有安装。

相关文章