小白日记12:kali渗透测试之服务扫描(二)-SMB扫描

时间:2023-12-05 20:09:32

SMB扫描

Server Message Block 协议。与其他标准的TCP/IP协议不同,SMB协议是一种复杂的协议,因为随着Windows计算机的开发,越来越多的功能被加入到协议中去了,很难区分哪些概念和功能应该属于Windows操作系统本身,哪些概念应该属于SMB 协议。因为该协议很复杂,所以是微软历史上出现安全问题最多的协议。

1、Nmap

最简单的方法:扫描其固定开放的端口139,445,但是无法准确判断其为windows系统

root@kali:~# <strong>nmap -v -p139,445 192.168.1.0/24          #-v显示更详细的信息</strong>

Starting Nmap 7.01 ( https://nmap.org ) at 2016-09-12 15:35 CST
Initiating ARP Ping Scan at 15:35
Scanning 255 hosts [1 port/host]
Completed ARP Ping Scan at 15:35, 1.70s elapsed (255 total hosts)
Initiating Parallel DNS resolution of 255 hosts. at 15:35
Completed Parallel DNS resolution of 255 hosts. at 15:35, 0.01s elapsed
Nmap scan report for 192.168.1.0 [host down]
Nmap scan report for 192.168.1.2 [host down]
Nmap scan report for 192.168.1.3 [host down]
Nmap scan report for 192.168.1.4 [host down]
…………………………………………
Nmap scan report for 192.168.1.255 [host down]
Initiating Parallel DNS resolution of 1 host. at 15:35
Completed Parallel DNS resolution of 1 host. at 15:35, 0.00s elapsed
Initiating SYN Stealth Scan at 15:35
Scanning 4 hosts [2 ports/host]
Discovered open port 445/tcp on 192.168.1.141
Discovered open port 139/tcp on 192.168.1.141
Discovered open port 445/tcp on 192.168.1.107
Discovered open port 139/tcp on 192.168.1.107
Completed SYN Stealth Scan at 15:35, 0.05s elapsed (8 total ports)
Nmap scan report for DD-WRT (192.168.1.1)
Host is up (0.0088s latency).
PORT STATE SERVICE
139/tcp closed netbios-ssn
445/tcp closed microsoft-ds
MAC Address: 1C:BD:B9:27:D5:32 (D-Link International) Nmap scan report for 192.168.1.107
Host is up (0.0011s latency).
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
MAC Address: 08:00:27:EB:1D:BC (Oracle VirtualBox virtual NIC) Nmap scan report for DESKTOP-TA5DCRJ (192.168.1.141)
Host is up (0.0027s latency).
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
MAC Address: 2C:6E:85:C4:0D:5B (Intel Corporate) Nmap scan report for kali (192.168.1.143)
Host is up (0.0032s latency).
PORT STATE SERVICE
139/tcp closed netbios-ssn
445/tcp closed microsoft-ds
MAC Address: 08:00:27:CA:63:99 (Oracle VirtualBox virtual NIC) Initiating SYN Stealth Scan at 15:35
Scanning 192.168.1.127 [2 ports]
Completed SYN Stealth Scan at 15:35, 0.06s elapsed (2 total ports)
Nmap scan report for 192.168.1.127
Host is up (0.00015s latency).
PORT STATE SERVICE
139/tcp closed netbios-ssn
445/tcp closed microsoft-ds Read data files from: /usr/bin/../share/nmap
Nmap done: 256 IP addresses (5 hosts up) scanned in 2.03 seconds
Raw packets sent: 516 (14.608KB) | Rcvd: 16 (616B)

高级扫描

1.发现开放smb协议的windows系统

root@kali:~# nmap 192.168.1.141 -p139,445 <strong>--script=smb-os-discovery.nse  #用于发现smb协议的脚本</strong>

Starting Nmap 7.01 ( https://nmap.org ) at 2016-09-12 15:43 CST
Nmap scan report for DESKTOP-TA5DCRJ (192.168.1.141)
Host is up (0.00030s latency).
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
MAC Address: 2C:6E:85:C4:0D:5B (Intel Corporate) Host script results:
| smb-os-discovery:
| OS: Windows 10 Home China 10586 (Windows 10 Home China 6.3)
| OS CPE: cpe:/o:microsoft:windows_10::-
| NetBIOS computer name: DESKTOP-TA5DCRJ
| Workgroup: WORKGROUP
|_ System time: 2016-09-12T15:43:52+08:00 Nmap done: 1 IP address (1 host up) scanned in 0.59 seconds

2.扫描windows系统smb协议是否有漏洞
由于从NMAP 6.49beta6开始,smb-check-vulns.nse脚本被取消了。它被分为smb-vuln-conficker、•smb-vuln-cve2009-3103、smb-vuln-ms06-025、smb-vuln-ms07-029、smb-vuln-regsvc-dos、smb-vuln-ms08-067这六个脚本。用户根据需要选择对应的脚本。如果不确定执行哪一个,可以使用smb-vuln-*.nse来指定所有的脚本文件,进行全扫描。

root@kali:~# nmap -v -p139,445 --script=smb-vuln-*.nse --script-args=unsafe=1 192.168.1.115 -Pn
<strong>#unsafe=1:高强度扫描,可能造成宕机,可选为0(安全扫描) #-Pn:有防火墙过滤包,也继续进行扫描</strong>
Starting Nmap 7.01 ( https://nmap.org ) at 2016-09-12 19:59 CST
NSE: Loaded 8 scripts for scanning.
NSE: Script Pre-scanning.
Initiating NSE at 19:59
Completed NSE at 19:59, 0.00s elapsed
Initiating ARP Ping Scan at 19:59
Scanning 192.168.1.115 [1 port]
Completed ARP Ping Scan at 19:59, 0.09s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 19:59
Completed Parallel DNS resolution of 1 host. at 19:59, 0.01s elapsed
Initiating SYN Stealth Scan at 19:59
Scanning PC (192.168.1.115) [2 ports]
Discovered open port 139/tcp on 192.168.1.115
Discovered open port 445/tcp on 192.168.1.115
Completed SYN Stealth Scan at 19:59, 0.04s elapsed (2 total ports)
NSE: Script scanning 192.168.1.115.
Initiating NSE at 19:59
Completed NSE at 19:59, 5.00s elapsed
Nmap scan report for PC (192.168.1.115)
Host is up (0.00028s latency).
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
MAC Address: 08:00:27:2B:32:0F (Oracle VirtualBox virtual NIC) Host script results:
| smb-vuln-cve2009-3103:
| VULNERABLE:
| SMBv2 exploit (CVE-2009-3103, Microsoft Security Advisory 975497)
| State: VULNERABLE
| IDs: CVE:CVE-2009-3103
| Array index error in the SMBv2 protocol implementation in srv2.sys in Microsoft Windows Vista Gold, SP1, and SP2,
| Windows Server 2008 Gold and SP2, and Windows 7 RC allows remote attackers to execute arbitrary code or cause a
| denial of service (system crash) via an & (ampersand) character in a Process ID High header field in a NEGOTIATE
| PROTOCOL REQUEST packet, which triggers an attempted dereference of an out-of-bounds memory location,
| aka "SMBv2 Negotiation Vulnerability."
|
| Disclosure date: 2009-09-08
| References:
| http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3103
|_ https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3103
|_smb-vuln-ms10-054: ERROR: Script execution failed (use -d to debug)
|_smb-vuln-ms10-061: NT_STATUS_ACCESS_DENIED NSE: Script Post-scanning.
Initiating NSE at 19:59
Completed NSE at 19:59, 0.00s elapsed
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 5.47 seconds
Raw packets sent: 3 (116B) | Rcvd: 3 (116B)

2、Nbtscan

#-R:使用本地端口137,兼容性好,可发现老版本的系统,扫描结果最全

#支持网段扫描

优点:可跨网段扫描mac地址,如果防火墙过滤不够好的话

IP address       NetBIOS Name     Server    User             MAC address
------------------------------------------------------------------------------
192.168.1.0 Sendto failed: Permission denied
192.168.1.127 <unknown> <unknown>
192.168.1.107 METASPLOITABLE <server> METASPLOITABLE 00:00:00:00:00:00
192.168.1.141 DESKTOP-TA5DCRJ <server> <unknown> 2c:6e:85:c4:0d:5b
192.168.1.115 PC <server> <unknown> 08:00:27:2b:32:0f
192.168.1.255 Sendto failed: Permission denied

3、enum4linux

在linux系统下枚举出windows系统,不支持网段扫描,但结果非常详细

root@kali:~# enum4linux -a 192.168.1.141
Starting enum4linux v0.8.9 ( http://labs.portcullis.co.uk/application/enum4linux/ ) on Mon Sep 12 20:22:19 2016 ==========================
| Target Information |
==========================
Target ........... 192.168.1.141
RID Range ........ 500-550,1000-1050
Username ......... ''
Password ......... ''
Known Usernames .. administrator, guest, krbtgt, domain admins, root, bin, none =====================================================
| Enumerating Workgroup/Domain on 192.168.1.141 |
=====================================================
[+] Got domain/workgroup name: WORKGROUP =============================================
| Nbtstat Information for 192.168.1.141 |
=============================================
Looking up status of 192.168.1.141
DESKTOP-TA5DCRJ <00> - B <ACTIVE> Workstation Service
DESKTOP-TA5DCRJ <20> - B <ACTIVE> File Server Service
WORKGROUP <00> - <GROUP> B <ACTIVE> Domain/Workgroup Name MAC Address = 2C-6E-85-C4-0D-5B ======================================
| Session Check on 192.168.1.141 |
======================================
[+] Server 192.168.1.141 allows sessions using username '', password '' <strong>#尝试建立空连接
</strong>
============================================
| Getting domain SID for 192.168.1.141 |
============================================
could not initialise lsa pipe. Error was NT_STATUS_ACCESS_DENIED
could not obtain sid for domain WORKGROUP
error: NT_STATUS_ACCESS_DENIED
[+] Can't determine if host is part of domain or part of a workgroup =======================================
| OS information on 192.168.1.141 |
=======================================
[+] Got OS info for 192.168.1.141 from smbclient: Domain=[DESKTOP-TA5DCRJ] OS=[Windows 10 Home China 10586] Server=[Windows 10 Home China 6.3]
[E] Can't get OS info with srvinfo: NT_STATUS_ACCESS_DENIED ==============================
| Users on 192.168.1.141 |
==============================
[E] Couldn't find users using querydispinfo: NT_STATUS_ACCESS_DENIED [E] Couldn't find users using enumdomusers: NT_STATUS_ACCESS_DENIED ==========================================
| Share Enumeration on 192.168.1.141 |
==========================================
[E] Can't list shares: NT_STATUS_ACCESS_DENIED [+] Attempting to map shares on 192.168.1.141 =====================================================
| Password Policy Information for 192.168.1.141 |
=====================================================
[E] Unexpected error from polenum: [+] Attaching to 192.168.1.141 using a NULL share [+] Trying protocol 445/SMB... [!] Protocol failed: SMB SessionError: STATUS_ACCESS_DENIED({Access Denied} A process has requested access to an object but has not been granted those access rights.) [+] Trying protocol 139/SMB... [!] Protocol failed: SMB SessionError: STATUS_ACCESS_DENIED({Access Denied} A process has requested access to an object but has not been granted those access rights.) [E] Failed to get password policy with rpcclient ===============================
| Groups on 192.168.1.141 |
=============================== [+] Getting builtin groups:
[E] Can't get builtin groups: NT_STATUS_ACCESS_DENIED [+] Getting builtin group memberships: [+] Getting local groups:
[E] Can't get local groups: NT_STATUS_ACCESS_DENIED [+] Getting local group memberships: [+] Getting domain groups:
[E] Can't get domain groups: NT_STATUS_ACCESS_DENIED [+] Getting domain group memberships: ========================================================================
| Users on 192.168.1.141 via RID cycling (RIDS: 500-550,1000-1050) |
========================================================================
[E] Couldn't get SID: NT_STATUS_ACCESS_DENIED. RID cycling not possible. ==============================================
| Getting printer info for 192.168.1.141 |
==============================================
could not initialise lsa pipe. Error was NT_STATUS_ACCESS_DENIED
could not obtain sid for domain WORKGROUP
error: NT_STATUS_ACCESS_DENIED enum4linux complete on Mon Sep 12 20:22:20 2016<strong>
</strong>

小白日记,未完待续……